How to properly hang a mirror over a sink

It is simply impossible to imagine the bathroom of any modern person without a mirror. Many believe that his main task is to help put himself in order every day. But, besides this, the mirror has become not only a functionally useful item, but also a decorative element of the room. When placed correctly, a mirror can visually enlarge a room. Let's find out how to choose the right mirror for the bathroom and what is best to focus your attention on.

Primary requirements

Before you begin installing the selected mirror in the bathroom, you should familiarize yourself with all the main factors and requirements that are important to consider.

Dimensions of the reflective surface. A lot here depends on the square footage of the room in which the mirror is installed. The glass should not be too miniature. Otherwise, it will simply be inconvenient to use it.

It should also not be too large, since it can be easily damaged, and the mirror can have an adverse effect on the psychological state of household members.

Distance from the floor. When choosing a certain height for installing a mirror, you need to take into account the height of the household. Experts advise maintaining a top edge spacing of 1.2 m to 2 m (standard). But the specified parameters are only general, average. Within these limits, owners can experiment as they please.

Distance from sink to mirror. Many people prefer to brush their teeth and wash their face while looking in the mirror during or afterward. For this reason, mirror surfaces are often installed above the sink.

How to choose a size?

Many people have problems choosing the size of the growth mirror. A common mistake is buying a canvas whose height matches or exceeds human height. If we think from the point of view of functionality rather than beauty, then this is a pointless overpayment. To reflect a full-length person, a mirror 1.2 m high is enough.

The width of the mirror surface also raises certain questions among buyers. The best option for placement in the hallway is a design with a width of 50 to 60 cm. A canvas that is too narrow will not allow a person to appreciate the appearance in all its glory. It is not always possible to place a product that is too wide.

If, in addition to the functional side of the issue, you are also interested in the decorative side, there are no restrictions. On the contrary, a mirror with a height of 1.5 m and above will create a visual effect of expanding the space. A visual increase in ceiling height is another plus, as is a significant increase in the level of illumination in the room.

Mounting options

Fixing a mirror in the bathroom usually does not cause any particular difficulties. There are not so many solutions for where to hang this part that it would take a long time to find the optimal place. Let's take a closer look at what the main features of common mirror mounting options are.

Over the sink

Installing a mirror above the washbasin is a standard solution for the bathroom. Homeowners resort to it most often. If the mirror is placed above the sink, a number of important factors must be taken into account. It is necessary to maintain the harmony of the interior design in the room, as well as the convenient location of the remaining components of the decor. Taking into account the distance between certain objects and the size of the bathroom, you can easily and quickly select the optimal width of the mirror.

A good solution is to combine it with a hanging cabinet. Such a piece of furniture will not only allow you to use a mirror cloth, but will also serve as a convenient storage for things and objects needed in the bathroom. With a mirrored cabinet, you will also be able to significantly save free space in the room, because you will not have to additionally nail down shelves or install another cabinet.

To ensure a high-quality view, it is recommended to hang the mirror above the sink, leaving a space of 30 cm.

This indicator may be violated if it is necessary to install a shelf for arranging personal hygiene products. In this case, the gap may vary by 5–10 cm.

A good solution is a mirror mounted into the wall. It can also be installed above a washbasin or bathtub at the above distance. Such solutions look impressive and original, but can cost a pretty penny. Simply hanging a mirror will be much cheaper. If you want to build a mirror into the wall, then it is recommended to give preference to options whose size is at least 50x70 cm.

Full length

A mirror in the bathroom can be hung not only above the washbasin. Instead of small canvases, many users choose larger models of mirrors - full human height. Such a detail can decorate the interior of a room, visually refresh it and make it more spacious due to spectacular light reflection.

Choosing full-length mirrors and a place for them is not so difficult. There is one very simple rule that should be followed when choosing this option: to reflect a full-length human figure, a canvas whose height will be equal to half the height is sufficient. For this reason, there is no need to look for a very large model from the floor to the ceiling.

In addition, mirrors that are higher than the door frame may not be the most convenient to use.

Features of bathroom mirrors

The bathroom has high humidity and is characterized by significant temperature fluctuations (especially where it is part of the bathhouse complex). It is obvious that increased demands are placed on the mirror here.

Mirror in the bathroom

The mirror should not deteriorate not only from being in a humid atmosphere. Direct exposure to water should also not harm it. And since the mirror is usually equipped with a frame, or is built into some equipment or furniture, this frame must also be moisture resistant.

Mirrors are designed simply: they are glass (or transparent plastic), coated on one side with a special layer - amalgam, which has high reflective qualities.

Mirror device

The amalgam substance quickly collapses upon contact with air. To avoid this, a protective layer of special paint is applied over the amalgam. This paint must also be resistant to moisture, otherwise, over time, dark spots will appear along the edges of the mirror.

Humidity and heat promote the appearance and development of fungal mold. To prevent a mirror from becoming a “bed” for her, its frame must be made of dense, smooth materials.

For finishing the following should be used:

water-resistant materials - ceramics, artificial stone, plastic;
special coating with PVC or other plastic;
painting with waterproof enamels.

The entire structure should not have cracks or gaps where dirt can accumulate and moisture can be retained.

Tools and fastening methods

The mirror in the bathroom must be installed correctly, using high-quality fasteners. The place where the canvas will be installed must be selected before laying the tiles or other finishing material. To prevent condensation from accumulating between the tiles and the mirror itself, it is necessary to leave a small distance between these elements. To do this, you can use small foam pads attached to the back side.

Based on the chosen mounting method, you need to stock up on a number of necessary tools. You can’t do without a level and a measuring tape. There are several ways to attach mirrors in the bathroom.

Bolts and decorative screws. The most reliable standard mounts, on which mirrors are hung very often. But the bolts cannot be hidden anywhere. Their use involves drilling holes in the tile, and sometimes in the mirror sheet itself. To do this, you will need to have special diamond drills and sandpaper to round off the resulting holes.

Specialized hooks and staples. These types of fasteners differ in their design. On sale you can find both simple and concise, as well as interesting decorative options. The convenience of installing mirrors using brackets and hooks is that there is no need to make additional holes for them. In stores you can find side or straight brackets made of wood, metal or plastic.

Tile adhesive. If the canvas is supposed to be recessed into the tile, then it can be attached like a regular tile. First, the base is cleaned of old tiles, puttyed, and an adhesive solution is applied using a special notched trowel. The mirror is attached to the prepared base, pressed with the back side and held for about 15 minutes.

Double-sided tape. Simple type of fastening. Optimal for small mirrors. For gluing it is allowed to use waterproof double-sided tape.

Liquid Nails. Liquid nails are often used to fix bathroom mirrors. The canvas can be glued in this way to a pre-prepared base made of plasterboard. As a result, the design will be strong, high-quality and durable.

Adviсe

The mirror you purchased in the store usually already has at least two fasteners installed on its back wall (this makes the job much easier). Most often, the elements are two metal loops into which dowel hooks must be threaded. With this mounting, the mirror is quite easy to remove if necessary and replace with another.

However, there is an option when the owners of an apartment (or house) prefer to glue the mirror between the ceramic tiles (in this case, the fasteners must be removed).

Now about how to hang a mirror in the bathroom on hooks, in more detail:

Place the mirror against the wall. Use a pencil to trace the top two corners to mark its exact location.
Remove it, measure the distance to the fasteners on it and transfer it to the wall.
Using a hammer and dowel, make small notches at the site of future holes (this will prevent the drill from slipping in the future).
Using a drill with a special ceramic tile bit, drill holes in the marked locations.
Using a hammer, carefully hammer the plastic dowels into the holes.
Screw the hooks into the dowels.
Hang the mirror on hooks.

You will have to act in approximately the same way if the manufacturer of the mirror provides not hooks for attaching it to the wall, but holes in the mirror cloth, covered with decorative caps. In this case, the process of transferring the locations of future holes to the wall is facilitated, and all other actions remain the same (with the exception of screwing in the screws included in the kit instead of hooks).

Accommodation Tips

There is nothing complicated about installing a mirror sheet in the bathroom. Here it is important to take into account the square footage and layout of the room, as well as your own preferences and ease of use of the mirror. It is worth listening to a number of useful tips and recommendations regarding the placement of this important detail.

In one bathroom you are allowed to hang not one, but several mirrors. It is advisable to choose the same canvases or made in the same style. It is not necessary to place them symmetrically, the main thing is that they are convenient to use.

Placing a mirror in the bathroom should be as safe as possible. It is not recommended to install the canvas too close to other plumbing fixtures in the room.

Having chosen the optimal place for fixation, you should mark it with lines, using a building level. In this way, it will be possible to fix the canvas as evenly as possible, without curvature.

If the bathroom has a large square area, then a small mirror is unlikely to be suitable for it. Large or medium-sized canvases fit perfectly into such environments.

It is necessary to install a mirror in the bathroom with high-quality and reliable fasteners, since this is a fragile item that should not be allowed to fall. If it’s scary to do such work yourself, it’s better to contact a more experienced technician, especially if you choose a complex installation method.

Our best products

Interested in purchasing an original full-length mirror with a guarantee and at a low price? In this case, place an order in the Miradeko online store. The catalog contains products of our own making. For the production of structures, high-quality raw materials are used, and strict supervision is carried out at all stages.

Over the 19 years of operation of the company, thousands of customers have purchased products. Each of them appreciated the following advantages:

A product range that is regularly updated with new product items.
Low prices due to our own production and status as an official dealer of other companies.
Prompt shipment and accurate delivery of orders throughout the Russian Federation within one day.
Official warranty for mirror products with a duration of 12 months.
24-hour information and technical support for clients on any issues.
Possibility of manufacturing mirror structures according to the client’s individual sketch.

Get an original, reliable and durable full-length canvas - add it to your cart and place your order. This will take no more than 30 seconds. If you have any questions, call or leave a request, we will answer.

Rules for determining the height of mirrors

The height of the mirror above the bathroom sink must be carefully calculated, otherwise there will be disharmony in the final result. With renovations and placement of household items in the bathroom interior, a compromise is usually reached.

However, determining a place for a mirror can throw specialists and the apartment owner off balance. Either it does not fit into the overall picture, or the opinions of the installer and the owners contradict each other.

Solution of the problem

You can determine at what height to hang the mirror as follows. The installation height is calculated based on the average value from the top line of the canvas in relation to the floor and ceiling.

The distance to the ceiling in the bathroom is necessary to place a shelf or cabinet to use for hygiene items. The distance to the floor is required to ensure that the reflection is not cut off.

The minimum mirror height is 800 mm. The standard size to ceilings in general apartments is 2.5 meters. Washbasin height – 700 mm. The average height of an adult is 165 cm, the minimum height for a child is 114 cm. A horizontal wall cabinet for small spaces takes up 40 cm.

Taking into account the parameters, calculations are made using the following formulas:

child’s height (in cm) 114 / 4 = 29 cm (part of the height that should be reflected);
then, 114 − 29 = 85 cm (height from the floor for a child) + 15 cm (reflection allowance) = 1 m from the floor (the bottom edge of the canvas should be);
adult height (in cm) 165 + 10 cm (at a distance above the head) = 175 cm (from the floor to the top edge is required for ease of use by adults).

It turns out that for the convenience of everyone, an 800 mm mirror needs to be hung at a distance of 175-180 cm from the floor to the top edge. The lower contour will be located a meter from the floor. This will allow you to place the sink and create a space of 20-30 cm between the sink and the linen.

As a result, the following advantages are available:

there remains an area for the tap and additional decorative elements (soap dish, cup holder);
there will be no splashes on the glass;
ease of use for both children and adults;
the canvas will be inaccessible to the hands of preschool children.

From the ceiling to the mirror, with a ceiling size of 2.5 m, there remains a distance of 70 cm to still place a wall cabinet above the sink, which is very convenient in small rooms that do not allow placing cabinets and shelves on the sides.

The question of at what height to hang a mirror above the sink in the bathroom for tall people is solved as follows. For them, the height of the mirror above the floor level in the bathroom should not exceed the distance from the floor to the top of the doorway.

Typically it ranges from 190 to 200 cm. This range allows you to place built-in and wall-mounted curtains with a height of 80 to 100 cm. At the same time, the standard distance to the bathroom sink is at least 20 cm.

If it is necessary to place a small hanging mirror for the bathroom, then it is placed at the person’s eye level, adding 5 cm. With a height of 175 cm, the horizontal eye level is at a distance of 155 cm.

The height is checked using the following calculations:

70 + 20 + 70 = 160 (cm).

The following data is used here:

70 cm – sink;
20 cm – distance above the sink;
70 cm – canvas;
160 cm – distance from the floor.

For other sizes of the reflective surface, the distance from the bottom edge to the sink should be a quarter of the total height of the mirror with an intermediate space.

Design dependent

There are various types and types of bathtubs available in the market, differing in material, size and shape. Each option has its own installation method and installation height requirements.

The most common type of construction remains a cast iron bowl. This is a very strong and durable material that holds heat well. But the product itself weighs a lot, which necessitates installation on a strong support, usually integrally bonded to it.

The legs are also made of cast iron and are not always adjustable. Therefore, the planned installation height of the bathtub from the floor must be calculated in advance.

The not too heavy enameled steel model is easy to install, but it is not stable. For installation, legs with height adjustment are provided. You can additionally place blanks made of durable material under them for adjustments during operation. However, for greater strength, it is recommended to support such a bathtub on three walls.

Acrylic bathtubs are lighter than cast iron, but they retain heat well and can be restored. Bottom fastenings are used for installation, so the choice of supports should be based on calculations of the expected height.

Harmonious mirror arrangement

There should be harmony in everything. Therefore, the width of the mirror is selected so that it is proportional to the height. Stores offer ready-made options: built-in cabinets, with shelves, wall hangings of different sizes. There are options with built-in lighting.

Before buying, it is worth studying customer reviews, which will help you navigate the choice of price and quality. For example, in the Aquaton online store you can select bathroom furniture as a whole or purchase individual elements. You can view the samples by photo, description of the material and price.

When installing a mirror in a bathroom where the toilet and bathtub are combined, it is necessary to take into account the location of the mirror relative to the place where the toilet is located.

Ideally, the distance from the edges of the mirror to the edges of the walls should be the same.

The canvas is not placed behind the bathroom; direct reflection from the opposite wall relative to the toilet is also not welcome. Therefore, if you are choosing a ready-made option, and not made to order according to your measurements, it is worth taking into account the size options offered by the seller.

The photo below shows the bathroom.

Popular mirror manufacturers

The manufacturer is an equally important factor in choosing a mirror for the bathroom. Let's look at 4 well-known manufacturers:

Villeroy&Boch is a German company with an impeccable history and reputation as a leader in the plumbing market. This name has become a guarantor of quality and reliability. If you don’t want to spend a long time choosing and looking for a high-quality mirror, just refer to the catalog of this manufacturer. The brand's collections feature mirrors of laconic design solutions, without frames, with or without lighting. Usually these are large mirrors in which you can see the reflection of half a person's height: Villeroy&Boch More to See A4041400, Villeroy&Boch More to See One A4301000, Villeroy&Boch More to See 14 A4293700;
Ravak - a Czech brand offers mirrors in an interesting wooden design, associated with eco-style, natural motifs and safe manufacturing materials. Among the options are mirrors with lighting and shelves, as well as without any additional accessories: Ravak 10 X000000848, Ravak Classic X000000307, Ravak 10 X000000850;
Flaminia – the imagination of Italian designers can truly be envied. The brand's mirrors are real interior decorations. The company's collection includes: double mirrors with decorative lighting - these are used in the dressing rooms of famous film stars and actors; narrow models with full-length reflection; folding mirrors and built-in furniture with many open shelves. What kind of mirror do you need? We recommend paying attention to the most popular Flaminia mirrors: Flaminia Make-Up MKS100, Flaminia Compono System CS180S, Flaminia Compono System CS192S.

Marking rules and installation technology

Determining the height is half the process. The height of the mirror above the sink should be optimal for all family members. Next, you need to mark the wall taking into account the location of the fasteners.

Installation on fasteners

The sequence of work is represented by the following algorithm:

Using a level, place the upper corner and central edge location marks on the wall.
Since the premises throw surprises at the owners in the form of uneven walls and floors, it is worth placing a piece of paper in this place in size (a piece of old wallpaper will do) and check by eye the horizontal and vertical positions relative to the other elements.
Measure the distance in the corners from the attachment point to the edge. Place marks and then drill holes for dowels or brackets. Since mirrors are made of heavy material, this should be taken into account during installation. Store consultants can help you select consumables that meet your load requirements.

To hang a mirror on fastening elements, spacers made of soft polypropylene moisture-resistant material are attached between the wall and the canvas. This is necessary to relieve pressure from the wall and fixing devices. When installing, the brackets are not fully tightened and leave a small gap.

Installation using construction adhesive or mounting tape

The order of these works is outlined below step by step:

When using these types of fastening, just as in the first case, marks are placed along the entire perimeter. The area under the mirror is thoroughly cleaned of unnecessary elements by drilling and carefully removing the tiles.
When drilling, paper tape is placed under the drill on the surface. This little trick helps maintain the integrity of the edges and avoid chipping. It is advisable that there is a gap of 2–5 mm at the edges from the canvas to the tiles on the wall for ease of installation. After the wall is cleared of all excess on the surface, it is cleaned to a smooth state. Unevenness will cause the mirror to stick unevenly. This situation is fraught with consequences in the form of moisture accumulation and fungus formation.
The reverse side is coated with construction glue or liquid nails. Apply mounting tape. Care must be taken to ensure that there are no gaps left. Install the mirror with support on the bottom edge. Then gently press it against the wall. For more reliable fixation, it is recommended to hold it for 15–20 minutes. You can use fasteners for fastening, which are removed after the glue dries.

Selecting the optimal height

The specified standards are recommended. They take into account the average parameters of bowl depth, support height, and human height. However, specific values can be adjusted based on personal preference to ensure that the bathtub's comfortable height from the floor provides maximum comfort.

The apartment owner must independently determine the average height of family members now and in the future. The smaller this parameter, the lower the bath bowl can be lowered.

Therefore, for short family members, a height of 500-550 mm will be suitable, eliminating the risk of falling. And for very tall people, a rise of 600-700 mm from the floor is considered acceptable, when there is no need to bend over.

Warm floor in the bathroom - installation technology and do-it-yourself coating installation (120 photos)
Bathroom floor tiles - step-by-step instructions for installing the optimal floor covering (120 photos)
Bathroom floor: rules and design features of modern floor coverings (140 photo ideas)

It is important to remember that the presence of children and elderly people in the family also imposes certain requirements on the installation method. In this case, the height should not exceed 500 mm. These standards are defined for children's and health care institutions.

And do not forget that the heavier the product itself, the lower it should be. For example, cast iron structures weighing 100-150 kg are placed closer to the floor.

How to choose the height of a mirror in the bathroom

Mirrors make our life easier and more convenient, especially if the installation in the bathroom or hallway is properly thought out. Some people like to fix their hair and small details of clothing in passing, others spend hours putting themselves in order before going out, some people tend to admire themselves for a long time in their free time.

The dimensions of the canvas should also be chosen optimally, in accordance with the preferences and height of all family members.

Of course, people spend the most time in the morning in front of the mirror and washbasin. For the bathroom you can choose any convenient format:

glass shelf above the sink with reflective strip;
a cabinet with a mirrored door near the washbasin;
decorative insert in the interior door;
mirror tiles on the entire wall (polymer analogues often have an incomplete reflection effect);
separate inserts into the cladding;
solid wall - to visually double the space;
cabinet with large mirror;
parts of stained glass windows and mosaic panels made of broken tiles.

Important! The general rule for a free-standing mirror is that the top point should be a few centimeters above the eye level of the tallest family member.

If this is cabinet furniture, then the height of the reflective inserts takes into account standard height, which is not always convenient for children and teenagers.

Installation Regulatory Requirements

There are clearly defined requirements for the installation parameters of plumbing fixtures. They are determined by the safety of operation and are based on the average height parameters of the person who uses them.

The most common dimensions of bathtubs are 500-650 mm in height, depending on the model. They are determined by the depth of the bowl. However, the size of the legs should also be taken into account.

When installing, take into account the following nuances:

The standard height of a bathroom from the floor is 600 mm. This parameter is characterized by the greatest convenience for a person when raising his leg when he enters or exits the bowl. Otherwise, not only discomfort may arise, but also a risk to the safety of family members.

For free access to the device, free space is required - at least on one side within the range of 700-1000 mm.

Legs and supports must provide the ability to lift the structure at least 150 mm above the floor. This is required to properly attach the siphon to the drain.

If the bathtub has a slope in the drainage bowl, then you should not use supports to form the slope. But the height difference for pipes should be in the range of 20-60 mm.

Selection by person's height

The optimal height of a small format mirror is selected so that it is convenient to use without additional devices or special poses. For example, in a family with small children, it is taken into account that they will look into it, even if the mirror is high. Children substitute stools or other devices, which is unsafe - this fact also has to be taken into account.

The height from the floor parameter can be changed when placing non-standard sinks that are installed at a height above the norm (from 0.7 m).

Very tall guys have to bend over a little if they are not happy with the height of the mirror above the bathroom sink. Of course, this happens at a party, but at home it is not normal. In the hygiene room, no one should experience discomfort when washing their face in the morning.

If this is an apartment or a house for one owner, the level of mirror surfaces is determined by his individual needs. But even in this case, no one should bend over or pull themselves up, wanting to put themselves in order.

When placing a mirror above the sink, you need to take into account the size of the room and select the correct proportions.

The inconvenience of searching for your reflection cannot be justified by design or lack of free space for mirror inserts. If it is impossible to adjust the height of the mirror in the bathroom, it can be duplicated by inserting interior doors or a separate insert in another place.

The largest mirrors for installation above the sink do not exceed 1x2 m in size.

How to attach

How to attach the mirror needs to be considered even before repairs. You need to choose the place where it will hang, the height from the floor. But if the mirror is purchased after repair, it is worth finding out the mounting methods:

Fastening with tile adhesive. During repairs, the mirror is attached to the prepared wall using tile adhesive. In this case, the thickness of the mirror itself should not be greater than the tile itself. For good adhesion, you need to keep the mirror pressed for about 10-15 minutes.
Gluing with tape. To do this, you need to clean and degrease the wall surface. Glue the mirror using strips of double-sided tape and press well. It is worth considering that small mirrors are glued in this way.
Fastening with liquid nails. In this case, dots or lines are applied using a special gun. The time is waited according to the instructions and the mirror is pressed against the wall.
Installation using screws. If the mirror has holes for fastening, you just need to drill holes in the wall for the dowels and screw in the screws. Often holes in the mirror are drilled using a diamond drill to avoid cracks.

It is very important to choose the right way to mount the mirror to ensure that it will not fall over time.

In this video you will see how you can hang a mirror in the bathroom:

Popular and fashionable options for mirrors over the sink

A mirror is not only a utilitarian attribute of any bathroom, but also a design element. They can be the main visual accent in the bathroom or organically complement the overall design concept. Each style has its own conventions on how a mirror should look above a bathroom sink.

Frames offer many variations; you can make them yourself if your bathroom is in a nautical style. Shells brought from the sea, small stars and corals, flat pebbles and polished broken glass, colored pebbles and other seafood are excellent decor.

A mirror in a glass frame made of decorative material looks original:

colored or frosted glass;
sandblasting pattern;
stained glass

When choosing mirrors and their design, you can rely entirely on your taste - who, if not their owners, should use the accessory every day.

When installing a mirror in the bathroom, it is better to hang it taking into account the distance from the floor, the interval between the linen and the sink, as well as the height of all family members.

Installing a bathroom mirror

After the mirror has been selected, purchased and delivered, it needs to be installed. There are two options here: it is built into the bathroom decoration, and is fixed either with special anchors or with the help of an adhesive. This is carried out as part of the general construction finishing work.

In the second case, you can install the mirror with your own hands, since it is a removable element of furniture, hanging on the wall or installed directly on the floor as a component of furniture (for example, a pencil case door) or independently.

Mirror installation

There are also some subtleties here: the anchor must be made of stainless steel, bronze or brass (ideally). At a minimum, have a special coating.

I recommend: Principles of purchasing and arranging furniture

When installing on the floor, you should pay attention to the material of the legs from the point of view of the same water resistance.

Choosing the shape of a mirror above the bathroom sink

When choosing a mirror shape to improve the design of a room, many factors are taken into account:

A mirror wall visually doubles the room; what is reflected in it is also important. On the contrary, there should be no framed mirrors or doorways, otherwise a certain “corridor” will be formed, which adherents of some teachings consider the entrance to the other world.
An oval or ellipse favorably emphasizes streamlined plumbing fixtures, the best solution for a hygienic room.
The round shape, especially in a wide frame, resembles a porthole or the window of a bathyscaphe. This visual technique is good to use when decorating a bath thematically. A regular round mirror without a frame will fit well into any interior.
Free form - for lovers of abstraction, not everyone likes something in the form of a large amoeba on the wall. But if the entire design concept revolves around the theme of denial of right angles and constructivism, this is an interesting way to play with the original interior.
The main standard is a rectangle, but it can also be hung vertically or horizontally. It all depends on the space occupied. Square mirrors are used less frequently.

Standards for the height of a mirror above a bathroom sink

Every design approach has its own standardization that specialists cannot ignore. When arranging an apartment or house on your own, you can deviate a little from general recommendations if this is due to physiological characteristics and the specifics of the bathroom.

With the current assortment on the market, you can immediately pick up everything you need, making small adjustments along the way if necessary.

It is also important to understand what reflection format is necessary (possible) at a given point in the apartment:

at full height;
to the waist;
just the face and shoulders.

Two mirror surfaces made of different materials will have their own shade in different lighting - gray, greenish or purple undertone. In this case, the height ratio from the floor or relative to the sink will not correct the situation. Therefore, it is recommended to purchase two identical mirrors if they will be hung side by side - above a common countertop for two or three sinks.

Any glass cutting workshop will cut you a suitable mirror according to your size, the price of which will be lower than on the market.

Important! The reflective surface must be of high quality, without defects and color distortions, if it is used for its intended purpose. In some cases, polymer mirror or black glossy tiles are purchased - purely for cladding. In this case, the quality of the reflection is of secondary importance.

Height from sink

When the room is beautifully decorated, people rarely pay attention to the height of the mirror above the washbasin in the bathroom. Most often they look at their reflection. When you have to pull yourself up or bend over, it causes discomfort; it does not fulfill its functional purpose.

This model is preferred by people who love rigor and order, because all excesses are hidden in the closet.

Most often, the sink is already “tightly” fixed, in accordance with GOST and SNiP standards. This level is determined by the method of connection to water pipes and sewerage.

Attention! It is convenient to wash your face when the sink is at table level - 70-90 cm from the floor; accordingly, the lower edge of the reflection plane is attached a little higher.

The wall remains splashed after each use of the washbasin, so tiles (another tile) are often laid a few centimeters above the level of the sink. A small format mirror is fixed above 2-3 layers of tiles. Usually 25-30 cm is enough to prevent splashes when washing from staining the mirror surface.

Such options are designed for any design style; their beauty is in their ease of installation and fairly affordable cost.

After repairs, the level of the sink is often adjusted; the sanitary container itself is often changed; accordingly, the distance to the reflecting plane is raised or lowered.

Height from floor and ceiling

When a full-length mirror surface is installed, every nuance and adaptation to the overall interior design is important:

proportions of all surfaces;
complex of reflected people (and children);
glass shape with amalgam;
method of fastening.

A bulky canvas in a massive frame is unlikely to decorate a bathroom. A mirror wall made of several identical panels fixed in parallel looks much more interesting. Glass that is too thin is inconvenient to install - they are fragile.

Thick tempered mirrors are a guarantee of strength, but they put a lot of stress on the wall.

Helpful advice! Optimally, the surface of the mirror and the level of the doorway are at the same height. If there is an original backlight, it should not be flush with the edge of the reflective surface so that the lamps do not “hit” the eyes. But mirrors look good, as if illuminated along the edge, with a diode strip around the perimeter on the back side, regardless of size.

When installing a large-format one-piece mirror, they are guided by the physiological characteristics of the owners. As a rule, 10 cm above the baseboard and an additional 10 cm above the height of the tallest person will give a distortion-free reflection if the plane is not tilted.

For waist-deep reflection, it is better to fix the lower edge of the glass with amalgam at floor level within 90 cm. And it will be enough to see yourself up to your shoulders - about 120 cm from the floor.

Correct calculation of the height of the mirror above the bathroom sink

Apartments with a standard layout are mainly equipped with small bathrooms. The dimensions and shape of the mirror sheet must correspond to the actual parameters of the bathroom. In combined bathrooms with average dimensions of 1.5-2.5 m2, a mirror surface is hung above the sink for ease of use.

Calculation of the installation height of the mirror sheet above the sink is carried out individually. These numbers depend on the height of the owners, the shape and location of the washbasin.

The top edge of the mirror should be aligned with the height of the tallest family member

There are no clear standards here, but there are useful recommendations from experts that we will use:

The bottom edge should be fixed at a height of at least 120 cm from the floor . In this position, small children cannot reach the canvas, which means the risk of damage from fragments is minimal. If the bathroom has a non-standard sink, then it is better to raise the mirror 20-40 cm above the washbasin so that it gets less dirty from water and toothpaste.
The top edge should be aligned with the tallest person in the household . To ensure that the canvas does not visually “cut” the top of a person’s head, add 2-3 cm to his height. But keep in mind that if the mirror extends beyond the upper level of the doorway, the proportions of the room will be disrupted.
, mirror surfaces of the same width as washbasins are installed in bathrooms .

The width of the mirror surface may be less than the horizontal length of the sink. A too wide version installed in a small room will reflect the tiles and the glow of the lamps. This is inconvenient because it distracts from your own reflection. In this case, it is better to reduce the width of the mirror surface.

To avoid affecting the proportions of the room, you can frame the mirror in a wide frame or buy it ready-made

Types of mounting mirrors above the sink in the bathroom

Attention! When installing reflective surfaces, preliminary marking is required - determining the horizon and vertical levels. To do this, use a universal building level and plumb line.

If the room has uneven walls, you still need to hang it at the points marked with a level, and you can choose an oval or curved mirror. It will hide the disproportionate ratio of walls and horizontal lines.

Methods for attaching a mirror.

A removable or hanging option, it is very convenient as temporary bathroom equipment when the renovation has not yet been completed or if the shape of the mirror has not yet been decided. Many hanging mirrors sold in finished form have hanging loops attached to the frame or directly to the back surface. For installation, two strong screws on dowels are enough.
A self-made accessory or bathroom shelf can be secured to special fittings. Wall brackets with holders can be found at any hardware store.
The trimmed mirror can be mounted with glue directly to a smooth wall. In this case, the glue is applied with a mesh, and silicone sealant is needed along the edge, which will protect the amalgam from decomposition in a humid environment.

Bathroom

Today, the use of wall reflective surfaces in bathrooms is also considered a fashionable solution. Many people in this room make the ceiling surface from mirrors. According to psychologists, this type of interior will provide an opportunity to feel the meaning of one’s own personality.

Having an understanding of the practicality and durability of products, give preference to options with moisture-proof characteristics. They do not deteriorate under the influence of humidity, and have an attractive appearance for a long period of time.

The use of large mirror surfaces is not an innovative solution in decoration, however, when arranging your home, use your imagination, be sure to stock up on knowledge, and you will definitely create an exclusive interior with their help.

Correct installation of a bathroom mirror cabinet above the sink

Wall-mounted cabinet furniture with mirrored shelves and doors is the most popular. With the help of such items it is easier to hide wall defects and find a place for all kinds of small accessories. In this case, the format of the mounted model is not so important; the space where this accessory is located is much more important.

Let us remind you that mirrored cabinet doors can open in different ways:

left;
right;
swing doors towards you from the center;
one surface is sliding, the other is fixed (right or left);
both halves of the door facade are shifted to the right and left.

When choosing from a catalog or in a supermarket, it is important to imagine how and where this item will function.

Agree, it is inconvenient to open a cabinet built end-to-end, for example, in the left corner, if the door opens in the same direction. Most often, right- and left-handed models are produced at a furniture factory. For the opposite option, you need to ask a sales floor consultant or contact the managers to clarify the assortment.

Corridor

It is the corridor that is considered one of the rooms of the home, in which there is always a place for mirrors. There is generally a small area and minimal lighting.

Placing the best large mirrors here will allow the homeowner to evaluate his own appearance before he leaves the room. For example, by placing a mirror on the side of the wall surface, the illusion of increasing space will appear.

A reflective surface arranged on the inside of the entrance door leaf will help achieve a similar effect. A great idea is to use a cabinet with mirrored doors.