What is a swing with a canopy called? Metal garden swing

Classic board swing

What do you need

Thick rope;
board 30–50 mm thick;
drill;
drill;
hacksaw;
dye;
brush.

How to do

1. Cut a piece of board about 50 cm long with a hacksaw or other saw that you have on hand.
2. To protect from precipitation and give a more aesthetic appearance, paint the resulting seat.

3. Using a drill a couple of millimeters larger than the thickness of the rope used, make two holes - at both ends of the board. Step back 2-3 cm from the edge so that the seat does not break, and drill exactly in the vertical center for an even suspension.

4. Divide the rope into two equal parts, make loops at the ends and secure to a suitable branch. Place the ropes at a distance approximately equal to the width of the seat.

5. Thread the ends of the ropes into the holes of the board and tie a couple of knots, choosing the desired height.

6. Try swinging.

What can be changed

If you don't have a board, a shovel handle, a log or a piece of plywood will work as a seat.

Swing base

A swing starts with a base, which can be very diverse. The easiest option is to buy a ready-made swing, which you just need to secure. Another option is to make a wooden seat with your own hands. For older children, you can use just one board, which will act as a seat. For younger children, such a seat will be dangerous, so a frame is needed for the child to hold on to. To create a frame, you can use round wooden slats or timber 2-3 cm wide. It is important to sand the wood well so that the child does not injure himself.

Also, the swing can be made of fabric. Moreover, this can be either a model without a frame, similar to a hammock, or a model with a wooden square base on which a fabric basket for a child will be held. It is important to provide holes for the child’s legs in this model so that he can swing comfortably. Such swings are most often used for children under 5 years old.

Swing made from a disc and one rope

What do you need

4–5 boards 30–50 mm thick and 400–500 mm long;
thick rope;
hammer;
nails;
brush;
paint or varnish;
clamps;
glue;
drill;
wood drill;
roulette;
thread;
pencil;
jigsaw;
sanding machine or sandpaper;
file.

How to do

1. Build a platform from boards. To do this, coat the side ends with glue, connect them together and tighten them with clamps. A simpler option: nail two bars across the boards, stepping back 10 cm from the edge.

2. Sand the top of the pad by hand with sandpaper or with a machine.

3. Using a tape measure, find and mark the center of the site with a pencil. Also put a line at a distance of 10 mm from the edge of one of the sides.

4. Drive a nail into the center, tie a pencil to it with a thread and draw a circle with a radius length along the mark at the edge of the area. Pull out the nail: you won't need it anymore.

6. Using a drill, make a hole in the center with a diameter 2–3 mm larger than the thickness of the rope of the future swing.

7. Using a file, grind off the resulting sharp edges in the center so that the rope does not fray when swinging.

What can be changed

The round seat can be easily replaced with a fairly strong rectangular board. This will not make your riding any worse.
In order not to bother with splicing boards, you can take a piece of plywood that is suitable in size.

Children's garden swing

If many parents feel sorry to spend a certain amount on themselves, then they have time, money, and a great desire to choose the best model to buy a children's swing.

As you know, the children's industry is the most popular, so in the world of swings for children there is all of the above for adults, only with even more tempting colors and shapes. In this article, we will not describe in detail the issues related to the selection and purchase of children's swings, we will simply consider the main options.

Outdoor swing for a summer residence: how to make it yourself and 40 of the most inspiring ideas for children and adults

A chair-cushion for such a swing can be easily sewn from an old bedspread, however, it will not be as durable as, for example, a wooden one, and besides, it is better to protect it from moisture

We go to the dacha to relax and work. We dream of lying in a hammock and drinking tea in the fresh air, but this is not enough for a child. Its energy requires intelligent use, and it is in our power to create the right conditions for this. A simple and practical way is to buy or build a swing with your own hands. So let's talk about what kinds of swings there are, what they are made of and how to build them.

A seat woven from wicker with a backrest will provide children with a comfortable rest on the swing

Swing made from an old tire

What do you need

Tire;
bicycle camera;
rope;
insulating tape;
steel washers according to the diameter of the rope;
staples? clamps;
drill;
drill;
knife;
thin cord or fishing line.

How to do

1. Estimate the approximate length of the rope so that it is enough from the branch to the ground, and add 1 m as a reserve.

Wrap the tape in the right place so that the edges do not fray, and separate the piece with a sharp knife.

2. Cut the bike tube and attach it to one end of the rope.

3. Tie this part so that you get a loop wrapped around the camera. This will protect the rope from chafing and prevent it from cutting into a branch.

4. Throw the rope over the branch and tighten the loop. For convenience, you can use a thin cord with a weight attached to it.

5. Form a knot at a height of approximately 1.5–1.7 m from the ground.

6. Cut two more pieces of rope, each about 2m long. Thread them into a knot on the hanger, and then tie one knot at each end to secure it.

7. Tighten a knot on the main rope from the branch. You should now have three ends that will hold the tire.

8. Divide the tire into three approximately equal parts and drill holes with a diameter equal to the thickness of the rope, moving away from the edge of the tire. On the back side, make a few more holes to drain rainwater.

9. Insert the ropes into the holes, put on the washers, and secure the ends with clamps.

10. Release the tire and try to swing.

What can be changed

Instead of clamps, you can simply tie knots that will prevent the rope from falling into the washers and will securely hold the entire structure.
If desired, the tire can be easily painted so that it looks more aesthetically pleasing and does not stain clothes.

Plank swing

What do you need

A piece of furniture board;
square;
pencil;
rope;
drill;
drill;
file;
sanding paper or plane;
hacksaw;
matches or lighter.

How to do

1. Step back 250–300 mm from the edge of the furniture board, attach a square and draw a line with a pencil.

2. Use a hacksaw to saw off the future swing seat along the line.

3. Mark with a pencil the places for attaching the rope in each corner, departing 20 mm from the edges.

4. Make holes with a drill. Select a diameter such that the rope passes with difficulty and does not dangle.

5. Saw off the sharp corners of the board with a hacksaw and then file it down. If you want it to be neat, first mark the shape with a template, coin or other round object.

6. Round the top edge of the board with sandpaper or a plane so that the child does not get hurt.

7. Cut two identical pieces of rope and burn the ends.

8. Thread the ropes through the holes in the board on each side so that the loose ends are on top.

9. Secure the ends of the ropes to any strong support, such as a wall beam.

What can be changed

If the furniture board is replaced with a cutting board, then all that remains is to drill holes and secure the ropes.
The swing can be hung in a doorway, on a tree, on the beam of a terrace or gazebo.

Swing made of polypropylene pipes and plywood

What do you need

Polypropylene pipe;
rope;
plywood;
carbines;
hacksaw;
pipe cutter;
drill;
drill;
dye;
brush.

How to do

1. Cut a seat from plywood measuring 30? 30 cm or 30? 40 cm. Drill holes in the corners for attaching the rope. If desired, coat the plywood with paint.

Cut the polypropylene pipe into pieces: 15 cm - four pieces, 25 cm - two pieces, 35 cm - two pieces. Drill through holes in each section along both edges.
Divide the rope into two equal pieces. Then fold each one in half, thread it through and secure it in the carabiners. These will be the left and right hangers.

2. Take the longest piece of pipe and thread one rope from the right and left hangers into the holes on each side.

3. Next, string one middle section of pipe at a time, also inserting a rope through the holes at the ends of the parts.

4. Next - one short piece at a time. Here the rope is inserted into the pipe itself along its entire length.

5. Now thread the free ends of the left and right hangers through the holes of the second long piece.

6. Insert the rope into the remaining open holes in the mid-length tubes. And then add one short piece at a time, again passing the rope through the pipe along its entire length.

Pass the free ends of the hangers into the holes in the seat and tie a knot in each of them.

7. Attach the carabiners to any sturdy support. The swing is ready!

What can be changed

The seat can also be easily made from a cutting board or piece of wood of a suitable size.
Instead of pipes, wooden blocks or cuttings from garden tools will do. True, you will have to tinker with drilling holes for the rope.

Skateboard swing

What do you need

Old skateboard;
rope;
shovel handle;
roulette;
pencil;
drill;
drill;
dye;
screwdriver.

How to do

1. Remove the wheels and anything unnecessary from the board.

2. Step back 5 cm from the edges and place marks for four holes for the ropes: two on each side.

3. Drill through these places. Select the diameter so that the rope holds as tightly as possible.

4. Cut two pieces of 30–40 cm long from the cutting and drill one hole in them on each side. Step back 3-5 cm from the edge to prevent the wood from cracking. These will be the hand rests.

5. Paint the bars the same color as the skateboard.

6. Divide the rope into two equal pieces and fold in half. Tie a knot at each end, but don't pull it too tight yet.

7. Thread the rope through the bars, make another knot, and then pass the rope through the holes in the skateboard. Tie knots at the free ends at the bottom of the board.

8. Hang the structure on a suitable tree branch and use the knots to adjust the handles to a comfortable position.

What can be changed

If you make thicker single hangers with a split on the skateboard, you can easily do without handles.

Swing with supports and a purchased seat

What do you need

Board 50 * 200 mm;
board 25 * 100 mm;
2 anchor bolts with rings;
2 carbines;
timber 50 * 100 mm;
nails;
swing seat;
hammer;
roulette;
drill;
drill;
hacksaw or jigsaw.

How to do

1. Cut the parts needed to assemble the two supports: four 2.5 m pieces from a 50? 200 mm, four - 1.35 m each from a 25? 100 mm and four - 35 cm each from timber 50? 100 mm.

Assemble the structure in the shape of the letter “A”. Fold the long boards at an angle and nail the lintels from the middle sections to them. Reinforce the top of the support with short pieces of timber.
Build the second swing support in the same way.

2. Trim any exposed edges with a hacksaw or jigsaw to avoid injury.

3. Place a piece of 50 ? board on the crossbars at the top of the letter “A”. 200 2 m long and nail it. Raise the entire structure.

4. In the middle of the beam, drill holes for fasteners at a distance of 50–70 cm from each other. Wrap the anchor bolts with rings into them.

5. Hang the seat on ropes and secure it with carabiners on the rings.

6. Check the strength of the structure.

What can be changed

Instead of boards for supports, you can use round beams or logs.
A purchased seat can be easily replaced with a homemade one.

Installation Features

Each post has a special design at the base for vertical concreting and reliable fixation in the concrete support.

Concreting depth - 70 cm.

Bearing mounts for swings

At the points where the swing is attached to the top crossbar, bearing mechanisms of our production are used.

This design ensures easy and uniform swinging of the swing and no squeaking when the fastening carabiners rub.

Safety comes first! There is no friction between the fasteners, so there is no load on the fasteners.

Manufacturing materials

The racks are made of metal profile 3 mm thick. Profile dimensions 6 x 6 cm.
The top crossbar is made of a metal profile 3 mm thick. Profile dimensions 8 x 6 cm.
Connecting sheets made of metal 8 mm thick. The horizontal crossbar connections use triangular reinforcements of the same thickness.
Bearing mounts for swings
Powder coating of all metal elements
Anti-corrosion primer coating

Swing frame dimensions

Crossbar height - 2.5 meters
crossbar width - 2.5 meters (can be changed to 2 or 3 meters when ordering)
distance between the posts at the base: width - 2.5 meters, length - 3.5 meters

Seat options

For nest or web swings with a diameter of 100 cm or more, we recommend a crossbar 2.5 m long.

For a single boat swing or with a closed seat up to 65 cm wide, a crossbar 2 m long is suitable. Most often, it is chosen when there is not enough space on the site.

When hanging a pair of swings on one bar, we recommend a 3 m long bar.

Chair swing

What do you need

Chair;
rope;
dye;
brush;
hacksaw;
drill;
drill;
sanding paper.

How to do

1. Saw off the chair legs with a hacksaw near the seat.

2. Use a drill to drill one hole in each corner of the seat.

3. Sand the surface of the chair with sandpaper.

4. Cover the resulting swing seat with fresh paint and let it dry.

5. Divide the rope into four equal parts. Thread each piece through the hole and tie a couple of knots.

6. Hang the structure from a thick tree branch using the free ends.

What can be changed

The swing can be hung on the terrace or in the gazebo. It will be especially cool to build several of these structures and relax with friends.

Material

There are two options for materials for structures with supports: metal and wood. Unfortunately, a children's metal swing for a summer house will require special skills from you. If you are not a blacksmith or a welder, building a metal frame will be problematic. And you will also have to look for pipes for supports.

To make such a swing you will need very little: a wooden chair and chains - and a unique decor for your yard is ready

Children's swings are not particularly demanding in terms of design. For children, the main thing is movement, and a rope suspended from a thick tree branch with a board for sitting can provide it.

Folding case for small items 16 cells

6,490.00 ₽ 5,192.00 ₽

The optimal solution that any parent can implement is building a wooden swing.

Pallet swing

What do you need

Pallet;
rope;
sanding paper or machine;
scotch;
carbines;
drill;
drill;
scissors;
lighter.

How to do

1. Sand the surface of the pallet with sandpaper or a machine to remove all burrs.

2. Drill six holes in the outer boards of the pallet with a diameter equal to the thickness of the rope.

3. Turn the pallet over and do the same on the other side. Try to keep the holes in the top and bottom boards underneath each other.

4. Go over all the holes with sandpaper or a machine to remove burrs and avoid damaging the rope.

5. Prepare two pieces of rope. Wrap the rope with tape and cut it at this point. Then cauterize so that the edges do not fray.

6. Thread the rope with a snake through the holes on one edge of the pallet and tie knots at the ends.

7. Do the same on the other side of the pallet.

Straighten the ropes to resemble the cables of a suspension bridge, and connect them with carabiners - one on each side.

8. Take two more pieces of rope and tie a loop on them at both ends.

9. Throw these ropes over a thick tree branch.

10. Attach the pallet to the hangers using carabiners.

11. Lay out a blanket and bring pillows.

What can be changed

Instead of a rope, the upper suspensions can easily be made from chains. Supporting cables can also be replaced with chains, but this will look too brutal.

Garden swing with supports

What do you need

Beam 100 * 100 mm;
timber 50 * 50 mm;
galvanized chain;
board 25 * 100 mm;
bolts;
mounting plates;
screws;
sanding paper;
hacksaw;
jigsaw;
roulette;
pencil.
How to do

1. From timber 100 * 100 mm, cut four racks with a height of 195 cm.

2. Assemble two supports in the shape of the letter “A” with upper and lower jibs from 50 ? 50 mm. Drill through the parts and connect with bolts.

3. Cut a 1.8 m long cross member from a 100 * 100 mm beam and secure it to the upper supports of the racks, tightening them with bolts.

4. Cut six boards 120 cm long: three for the back and three more for the seat.

5. If desired, cut out a pattern on the top board of the backrest with a jigsaw. Sand everything well with sandpaper.

6. For pieces of timber 50? Attach three boards with 50 mm screws - this will be the seat.

Do the same for the back and join the two pieces together at the desired angle.

7. Cut out armrests from two boards and attach them with screws through the beam to the seat and back.

8. Drill holes in the beam for the bolts and install them through the chain link. Secure it on top with a nut, and to prevent it from falling into the wood, place a metal plate or washer of large diameter.

9. Make holes in the seat beams, insert bolts into them and secure the ends of the chains.

10. Adjust the length of the hangers to the desired position.

What can be changed

For greater strength, you can add another cross beam along the bottom of the rear of the supports.
If desired, build a canopy made of polycarbonate or tarpaulin to protect from the sun and precipitation.

Swing (91 photos)

A garden plot is incomplete without a swing. They decorate the garden, allow children to enjoy the fun, and adults to relax.

Swings can be wooden, metal, plastic, with one seat or several, bench swings with a canopy that protects from the sun and wind. For children, swings are made with reliable fastenings and durable seats to completely protect the child.

Easy to use, portable swings have a folding design, which allows you to move them around the site depending on your desire.

Installed in the shade of trees, a swing will add a sense of calm and tranquility, and the garden will add some personality.

Wicker basket swing under a tree

Children on swings in the garden

Wooden hammock swings on the terrace Pillows on a garden swing in the shade of trees A pergola swing near a picturesque wall

Oak swing against the background of birches

Green children's swing for outdoors

Homemade wooden swing on metal chains

Hammock swing on a wooden frame

A shady corner with a wooden swing. A swing without a roof on the lawn of the house.

Children's swing with double chain suspensions Kids on balance swings Long swing bench in the park Pergola swing with blanket and flowers

Outdoor swing-scales with horses

Stylish country veranda with swing

Garden swing with side tables

Colorful decor of garden swings Swing bench with plastic awning

Homemade garden swing from driftwood and logs Girls on a swing swing in the garden Children on a wooden swing with a round seat

Bright decor of a swing in a pergola Cozy blanket on a garden swing

Soft upholstery for home swing sofa Wooden sofa for two on swing under canopy

Light green sofa swing with bright textiles Wedding photo zone with garden swings Decorated with textiles and flowers of a typical garden swing Wooden swing on the lawn

Girl resting on a log swing in the garden. Mom and baby on a giant swing.

Happy couple on a pergola swing Swing on a portable support beam Home textiles on a garden swing A-frame swing support with a bench under a canopy

Sofa swing in a country house

Orange and green decor of hanging sofa swing Log garden swing

Urban wooden playground with swings

City yard with green swings made of wood and metal Modern hanging swings in wenge color on the veranda

Seat rail on a garden swing chain A-shaped swing support with a bench on metal chains

Garden swing with waterproof canopy

Cocoon swing with white cushions

Vine ornament on the back of a garden swing on chains

Wooden interior with swing Sofa upholstery for garden swing

Portable design of a garden swing made of wood The simplest rope swing by the sea Children's garden swing from a pallet Factory-made swing-balancer for the street

White garden swing on metal chains

Swing for the whole family with a horizontal bar and a seat for the baby Hanging sofa swing with green upholstery Swing on the veranda of an Alpine chalet

Loft bedroom with swing

Rope swing in the shade of a large tree

Log swing in a picturesque village

Children's town in wenge color

Mom swings her baby on a wooden swing. Swing-attraction on a tree.

Cozy basket swing for one

Swing made of rounded logs

Veranda with a decorated swing Wooden shelf-swing in the bedroom Terrace with a swing in the Scandinavian style Wooden swing with two hammock seats

Romantic couple on a wooden swing

Chic swing in the interior Veranda with a white sofa swing

Swing-sofa for a country house

White metal swing baskets on the veranda Fragment of a bench on chains

Boy with a book on the cushions of a garden swing Decorative swing with pink fur Hanging wooden swing on ropes Girl in pink on a forest swing Balcony with a bright decorated swing Fastening the swing seat with ropes Swing with soft seats under a canopy

Designer ring swing Bright blue wooden rocking horse with red mane

Aristocratic garden swing with velor seats

Girl on a swing over the sea Wicker cocoon chair

Double Kids Swing with Colorful Patterns for Yard

Wooden swing with double suspension for little ones

White swing with gray awning

Kinds

All swings can be classified according to the number of axes of rotation:

With one axis of rotation. These swings are easy to make and are the simplest option. The movement of the seat occurs exclusively back and forth perpendicular to the beam on which the structure is placed. The minimum height from the ground to the seat in this case is 35 cm.

With several axes of rotation. In this case, the movement of the seat from side to side is added. This design is quite labor intensive. Suitable for older children. The distance from the seat to the ground is the same - 35 cm.

With one suspension point. The elements with the help of which the swing sets in motion - a chain or rope - converge at one point under the crossbar. In this case, the distance from the ground to the seat and from the seat to the structure supports will be 40 cm.

They are also divided according to purpose:

Mobile. This version of the play building has a simple, lightweight design, making it easy to move from one place to another. For example, in any place convenient for playing: even in the house, even outside in the shade.
Family. They have a huge heavy structure. At first glance, it looks like a bench without supporting elements with a large backrest. This swing can accommodate the whole family. A U-shaped structure is used to fasten it, and chains or cables with excellent strength are used as fixation.

This type of play structure can be covered with an awning or a roof can be built over it - and you can ride even in the rain.

Children's. This category of swings is made in the form of boats or hanging chairs. Children will be able to ride them only when adults are nearby with seat belts fastened.

Distinction by type of structure:

Hammocks . Fastening occurs using a metal crossbar. This can, of course, be replaced with a strong lower tree branch, provided it is straight enough. The weight that the hammock structure can withstand is about two hundred kilograms. When using this design, you can feel the flight above the ground. This option is very popular among those who like to read books.
Singles . They have a variety of designs. No need to install an additional crossbar. The peculiarity is that it is easy to install, so this type of swing can be installed anywhere. Various materials are used for construction.
Sun loungers . This system accommodates three people: one child and two adults. The configuration of the swing is such that its fixation is necessary only at one point, so it can be installed in an apartment. The strength of such a product, despite its apparent lightness, is quite high due to the metal alloy.
Hanging . The design of this version of the swing is usually made of a seat and several cables or strong chains. The cable elements are fastened on each side. The dimensions of such a product are varied: they depend on the materials used. The distinctive qualities of the design are strength, lightness and comfort.

How to make it yourself

If you don’t want to spend a lot of money on decorating your summer cottage, then you can do everything yourself. This does not require any special skills.

You can not complicate your task and make a primitive hanging swing. To do this, it will be enough to secure the seat on ropes tied to a tree. Tires, broken skateboards, and parts from armchairs or chairs that have become unusable are often used as this seat. But if you want to make a really beautiful swing, then it is best to buy a special double seat made of plastic.

You can also make a more complex design . To create it you will have to make a wooden frame. To construct it, fasten one support from the beams in the form of the letter A. Two such supports are connected to each other by a crossbar. The seat is attached to it using ropes.

You can either make the seat yourself or buy a ready-made one. It can also be further decorated, because children's toys should be bright. And for maximum comfort for children, it should be covered with a blanket and pillows.

It is also very easy to make swing duets . To do this, you need to cut a simple tire into two parts. It is installed on the ground. You need to put a well-treated board on it. When children sit on the edges of such an improvised swing, they can safely swing on it in the same way as on a purchased attraction.

How to make a double wooden swing in the Russian style, see the following video.