How to move a heavy cabinet on linoleum

How to move or move a heavy cabinet

Moving a large object often damages the floor covering. Therefore, people have accumulated unique but practical recommendations that make work easier and protect linoleum from scratches.

Before moving you need:

• remove all contents;
• remove all removable structures: shelves, rods, if it is a compartment - doors;
• secure doors and pull-out shelves with tape;
• remove the mezzanine;
• move the cabinet a little away from the walls;
• wash the floor in the room.

When moving, it is better to work with three people - two move, and the third follows the direction.

One of the most popular and always available means of moving the cabinet is raw potatoes. To do this, you need to select large tubers of the same size, rinse and dry with a towel.

One side is raised slightly and potato discs are placed under the base. If the furniture is heavy, then the amount of potatoes is increased. After this, all that remains is to move the cabinet, which will slide easily due to the potatoes.

The cabinet will also slide easily on the floor. But this is far from a practical option, and will require thorough washing of the floor from grease with soapy water.

Potatoes are cut into slices 2 cm thick

Wool rug

For this option you will need a wool rug or a piece of felt. It is optimal if its size is slightly larger than the base of the cabinet. But you can use 2-3 pieces.

The cabinet is raised and a rug needs to be laid under it so that it is located under all the supports. Two people work - one person pushes the furniture, and the other pulls the rug from the front.

Two people are needed to use the wool rug

Nylon covers

This method is only suitable for moving furniture with legs. To do this, rub the lid on the outside with paraffin and place it under each leg.

Milk cartons work roughly the same way. The inside of such bags is already treated with a composition that contains paraffin. Therefore, they are turned inside out and put on the legs.

This method is only suitable for moving furniture with legs.

Paraffin or wax

This method can be used on a flat and hard surface to move furniture over a short distance. Paraffin and wax are generously rubbed onto the surface on which the furniture will move. Wash the paraffin with a chloroform solution or warm soapy water.

A sliding surface can also be made using:

• glycerin;
• dishwashing detergent (Fairy, etc.);
• laundry soap.

Glycerin is applied in pure form, soap and detergent are diluted with water, slightly foaming.

Dough rolling pins

To move the cabinet you will need 4-5 rolling pins, which will act as rollers under the base of the cabinet. While moving, you need to constantly place rolling pins in front, removing those that the furniture has already “traveled” over.

Furniture conveyor

The kit includes a lever and 4 rubberized rollers on the platform. The cabinet is lifted using a jack lever and movable wheels are placed at each corner, which move in any direction.

Furniture conveyor

Felt pads

These pads are designed to be placed under furniture legs and bases to protect floors and provide structural stability. Sold in squares, circles and whole pieces. Each lining is treated with glue; all that remains is to remove it from the cardboard and secure it to the base of the furniture being moved.

How to move a closet alone

Rearranging furniture is not an easy task, especially if it is a bulky cabinet. It becomes even heavier when you have to move it yourself. We have prepared several ways to make it easier.

Safety precautions

If you take on the task without experience and without studying how to rearrange heavy furniture, you may be faced with such problems as: scratches on the cabinet, broken fittings and legs, torn linoleum and wallpaper, scratched parquet flooring, a chipped corner of the door jamb. But the most serious consequence of an illiterate approach can be a broken back. There are many ways to avoid possible problems. Good safety precautions and the use of special tools or time-tested methods. Before you start moving the cabinet, unload it as much as possible, remove everything breakable and heavy from it. Glue the doors together with tape.

7 ways to move a closet. Source: pinterest.ru/pin/733664595520056861

Moving the cabinet over soft surfaces - carpet, rug

The question of how to move furniture on a soft surface is quite complicated. The frictional force generated when trying to move the cabinet makes it difficult to do it yourself, without the use of special tools or prepared means.

A furniture conveyor, garden cart or special furniture stands purchased in a store will help you do this job quickly and without straining.

If we consider folk remedies, then it all depends on whether the cabinet has legs:

• if the cabinet has legs. A plastic cover is placed under each leg; when moving, the cabinet begins to slide rather than rest. The lids can be replaced with foil folded several times. If the weight of the cabinet is not very large, empty milk cartons will do;
• if the cabinet has no legs. A piece of fiberboard or linoleum is placed under the cabinet. You can not cover the entire surface, but a piece for each corner. The cabinet moves using belts or ropes.

We unload the closet as much as possible. Source: cdn.pixabay.com

We move the cabinet on hard surfaces - laminate, linoleum, parquet

Moving heavy things on linoleum can easily tear it, and on parquet and laminate flooring it can be scratched. To prevent this from happening, the floor is treated with silicone grease or soap solution to reduce friction. Lubricant is also suitable for moving on laminate and parquet. True, with a caveat, its composition should not have a bad effect on the wooden surface. The second option is to place an inverted entrance mat under the cabinet. So that the pile faces down, and not the sliding part towards the cabinet.

Did you like the article? Subscribe to our Yandex.Zen channel Add to favorites Printable version

potolokspec.ru

Precautionary measures

When moving bulky furniture, it is important to protect yourself from possible injuries, damage to the interior and the structure itself.

Here are some recommendations:

1. You should not move furniture without auxiliary devices . This often leads to damage to floors and deformation of the cabinet, injuries to the back, arms and legs.
2. Before work, you need to clear the room of unnecessary items . Otherwise, you may trip and injure yourself while working.
3. During work, you need to monitor whether the devices have slipped out from under the base , and correct them if necessary.
4. Make sure your position is stable . Do not rush, make sudden movements or forceful jerks.

Yes, you'll have to pay. But this option guarantees the safety of the interior, furniture and, most importantly, health.

During the renovation, we were faced with the need to regularly move furniture from place to place. At first, they did not attach any importance to this and, as a result, some of the linoleum had to be re-laid due to damage from the wardrobe. It turned out that there are many options for protecting floors and they all work. We used a wool rug option, which made moving the furniture easier and protected the new coverings.

Consequences of careless handling

But linoleum, no matter how reliable and durable it is, needs careful care and careful operation. The above-described elasticity and some softness hide those features of the material that do not allow it to be handled roughly. When moving heavy things on linoleum, it is quite easy to damage it. Under the pressure of the cabinet legs, it bends, gathers like an accordion and, as a result, breaks. Repairing the material will be either difficult or completely impossible.

Damage to linoleum

On a note! Sometimes linoleum tears can be repaired using special cold welding, but this is an extra cost and extra work for the home owner. And the material cannot be restored to its 100% integrity. It is much easier to prevent damage to the coating if you move the furniture correctly.

Cold welding of linoleum - stages of work

By the way, even if the material is not affected by furniture constantly moving over it, it deteriorates under the pressure of the legs of a heavy cabinet or sofa. In places where there is large or massive furniture, grooves form on the material over time - the linoleum simply sinks under things. And even if you remove a heavy cabinet from it, the holes formed in the place of the legs will not always straighten out again - a lot will depend on the duration of the mechanical impact, as well as on the quality of the floor covering.

Torn linoleum

How to move heavy furniture: choosing the best way

Hi all! Almost every house and apartment has a bulky closet, a heavy cabinet and other structures that cannot simply be picked up and lifted above the ground to be moved to another place. Therefore, a natural question arises about how to move heavy furniture.

Yes, you can just pick it up and push it in the right direction. But if you do this on laminate, parquet, or a wooden floor, or even on linoleum that is not of the highest quality, which is not planned to be changed, it will be extremely easy to damage the surface.

We are interested in moving it in such a way as not to scratch it and deliver the furniture to the right place without damaging the floor.

It doesn’t matter whether it’s an old Soviet wardrobe or a modern wardrobe in a classic style. All the methods discussed are equally suitable for various situations and furniture. And in some cases it is possible to cope alone.

Moving a Heavy Cabinet

Let's look at how heavy furniture moves using several examples. However, before you begin to implement each of the ideas, you should carry out a number of preparatory activities.

Preparation

First, you need to free up space where any piece of furniture will be rearranged. There should be nothing in that place, other pieces of furniture are removed, it is also important to remove small elements of the room’s furnishings in the path of the object’s movement so that they do not interfere. It is recommended to immediately carry out the necessary cleaning at the new proposed installation location - wipe off dust, sweep away debris.

Also, furniture that is planned to be moved must be emptied. The closet, cabinet, etc. should be empty, and all shelves should be removed to prevent them from falling. It is better to seal furniture doors and drawers with tape so that they do not open - this will prevent the risk of injury and damage to the product.

How to move heavy furniture on linoleum using lard?

Step 1.

The skin is cut off from a piece of lard so that a little pulp remains on it. Then the skin is cut into four square pieces - according to the number of furniture legs. However, if the furniture has a long base instead of legs, longer strips of lard skin can be used.

Step 2.

The skin is placed under the legs of a cabinet or other piece of furniture so that its surface is under the leg, and the fat “looks” at the floor. The skins are placed under all four legs of the cabinet or under its base.

Advice!

It is better to ask an assistant to lift the cabinet. It is quite difficult to cope with this task of lifting furniture and placing improvised “rollers” alone.

Step 4.

Grease stains from the floor are removed with a rag soaked in a soap solution.

How to move heavy objects with a rug?

Step 1.

Take a small rug from the bathroom or an old terry towel.

Step 2.

The furniture is carefully lifted by one edge. It is important not to drop the cabinet on your feet - the simplest safety precautions are observed.

Step 3.

At this moment, the rug is tucked under the raised edge. If the work is done alone, then you can help yourself with your foot.

Step 4.

The rug is placed on the other side of the cabinet in the same way.

Step 5.

The furniture is safely delivered to the new chosen location. The rugs are removed.

Video - Moving a cabinet using fiberboard

Where to begin

I think many of you have had to deal with the need to move heavy furniture from place to place.

To accomplish such tasks, you need not just to have physical strength. Sometimes even a person of modest build, using his head and showing resourcefulness, can move a cabinet from one room to another without much effort.

You should start with these nuances:

MDF kitchen facades: what types are there, price, customer reviews

• determine whether your furniture stands on legs or not;
• it is much easier if it has wheels;
• empty the closet of all unnecessary things;
• It is better to remove all easily removable elements;
• It is recommended to do a quick wet cleaning of the floor;
• It is better to treat the floor with detergent;
• Don't wait for the floor to dry before you get started.

You can move a heavy cabinet to another room without even disassembling it yourself. I can't guarantee it will be easy. It all depends on the specific situation and circumstances.

The point is to make it glide as easily as possible. And to do this, you should empty the furniture and provide the smoothest surface possible on which to move.

Now we will separately consider several methods of transportation in an apartment or house.

Here are the usual folk methods, as well as more advanced ones. To implement them you may need:

• potato;
• covers;
• rug;
• paraffin;
• wax;
• laundry soap;
• special conveyor;
• belts;
• cart.

Let's take a look at these methods separately and find out what may be required and how to bring this or that idea to life.

I think it won’t be too difficult for you to figure out how to lift a cabinet off the floor using simple physical strength. But sometimes even the efforts of a strong man are not enough.

Then dexterity, the experience of our ancestors and banal ingenuity come into play.

The essence of the method using potatoes is this:

The film on the facade of the MDF kitchen has peeled off: what to do, how to glue it

• you need to cut raw potatoes;
• usually cut in half or into slices 7 mm thick;
• furniture is tilted to one side, placing slices down;
• on the other side the same thing is done;
• It is better to unscrew the legs if they are present;
• or use another method;
• when the cabinet rests on the potatoes, you can push;
• starch and a wet floor will ensure easy sliding;
• starch prevents scratching the floor surface.

After moving the furniture, all that remains is to remove the white marks left by potato starch.

This method has existed for a very long time, but due to its simplicity and effectiveness it has not lost its relevance. An excellent option to avoid scratching the floor surface.

It is best to use wool or felt rugs of sufficient thickness. Make sure that heavy furniture will not simply tear it during transportation.

To avoid tearing linoleum or other flooring material, you will need to carefully prepare. The method is effective, but difficult in terms of preparation:

• you need to find a rug of suitable sizes;
• furniture leans to one side;
• the carpet is pulled through;
• then the tilt is made in the opposite direction;
• the rug is distributed under the furniture;
• At least 2 people are required;
• then you need to carefully start pulling the cabinet;
• By analogy, the rug is taken out from under the furniture.

It is not necessary to wet the floor itself. Although this may provide the extra glide needed to move the heaviest furniture.

There is another simple method that is accessible to everyone. It involves the use of the most common polyethylene lids.

It is advisable to choose covers that will fit the size of the existing legs, or will provide coverage of sufficient area under the cabinet.

The movement sequence will be like this:

• the required number of lids is lubricated with soap or wax;
• the cabinet leans to the side;
• greased lids are placed under one side;
• the other side rises;
• covers are also installed there;
• the floor is wetted for better sliding;
• You can push furniture, moving it to the right place.

This method is widely used for any type of flooring. If everything is done correctly, the likelihood of damage to the floor will be minimal.

So you just need to be careful.

Soap, wax and paraffin

These 3 components will provide a decent level of efficiency.

Here the method looks a little different. Some people just lubricate the floor and begin pushing furniture along the marked lines. But you can also lubricate the bottom of the corner cabinet itself and at the same time coat the floor. Here, start from how heavy the structure is.

The heavier the furniture, the more lubricant will be needed. Upon completion of the rearrangement, the remaining soap or paraffin is simply wiped off with a rag and warm water.

Conveyor

Currently, to simplify the movement of heavy furniture, special devices are used. You can make a furniture conveyor with your own hands, but its efficiency will be lower than that of a professional tool.

The conveyor minimizes the required physical effort. It allows you to move furniture yourself without involving movers in this procedure. After all, you will have to pay a lot of money for their services.

Using a conveyor, you can:

• move furniture anywhere in the room or apartment;
• protect the surface of walls and floors from damage;
• avoid damage to furniture;
• save time;
• move the structure on any type of surface;
• drag even very heavy objects;
• protect your own spine;
• save on loader services.

The principle of the device is simple. It uses a hardened steel lever and a rubber handle. With its help, the cabinet rises. Under each corner, raised in turn, a special platform consisting of wheels is placed. The furniture is placed on the floor, fixed on these platforms, and then it simply rolls to the right place.

In the video you can see in more detail how this happens and what it looks like in practice. And you can leave your feedback and tell us if you had to move heavy furniture yourself, and what methods or devices were used.

Tightening straps

Such elements are usually used by loaders. To work with them, you will need two people, which makes it impossible to move them with your own hands, without outside help.

Tension straps are usually made in the form of polyester tape, which has a ratchet tension mechanism and fastening fittings. With the help of such a device, furniture is moved that has legs or does not have them.

The use of such belts minimizes the load on the back and distributes it evenly between 2 people. As a result, even heavy cabinets can be lifted without much effort.

You can also add a dolly here. But here you need the ability to pick up furniture. Not the most common option in everyday life. Most often, dollies are used in warehouses and factories, and the movement does not involve furniture. But anything can happen.

How to easily move heavy furniture on carpet or rug

Let's start with the most difficult one, because... It is more difficult to move furniture on a fleecy surface than on smooth linoleum or laminate. There are both special devices and folk tips that will help you with this.

1. Furniture conveyor

This is a set of items that includes a small jack-lever, with which one of the corners of the furniture is raised, and four stands with independent wheels that can move in any direction. By placing mobile mechanisms under each side of the cabinet, you can easily roll it around the entire apartment. If you need to move furniture specifically over carpet, then choose a conveyor with wheels of a larger diameter so that they do not sink in the pile. Fortunately, there are many similar offers on the market now.

2. Special stands for furniture

They are small circles of different thicknesses and diameters. Smooth plastic ones are suitable for carpeting. They are attached either to an adhesive base, to screws, or to built-in nails. The last option is suitable for heavy furniture, because... turning it over and screwing the stand on is very problematic. By the way, the adhesive base may not support the weight of a massive cabinet, so it is better to strengthen it with super glue or something similar.

3.Garden/handcart

Particularly enterprising citizens use a metal cart with two wheels to rearrange furniture. This option is suitable if you want to transport a bedside table or small chest of drawers from room to room. However, if the furniture is quite wide, you may need the help of a friend to hold the opposite edge. Otherwise, you can get by with a belt or a piece of flat, wide elastic band to secure it.

4. Food foil

This simple thing will help you rearrange furniture on legs. This option is suitable for a table, couch, etc. A sheet of foil is folded in several layers, placed under the leg, and the free corners are wrapped around. This will prevent the material from moving to the side when moving along the pile. However, this method is not suitable for a very heavy cabinet - the foil will simply tear under its weight.

5. Polyethylene lids

This old-fashioned method is still popular because of its simplicity and accessibility. However, please note that it is only suitable for furniture with separate legs. If the edge of a sheet of chipboard is placed on such a stand, it will simply become deformed, and you will not achieve the desired effect.

6. Milk carton

This is exactly the case when they say: in a kulak economy, everything will do. If the furniture is not very heavy, then the bags can simply be put on the legs, but be sure to turn them inside out. The fact is that the inside of the package is treated with a paraffin-containing composition, which makes it easier to slide over the fleecy surface. To rearrange a massive object, the bag must be folded several times and only then placed under the corners.

Tips on how to move a cabinet without legs without scratches, the most effective methods

Every person in life is faced with the need to move furniture during renovation, general cleaning, or simply to improve the home space. The most problems arise when moving heavy objects. The question of how to move a heavy cabinet without legs as safely and efficiently as possible puzzles many apartment and house owners. To solve this problem, there are many folk methods and special devices to make moving furniture easier.

How to move a heavy cabinet on linoleum?

There is a proven folk method for moving heavy objects, which we have used more than once when rearranging home furniture. These are pieces of lard on the skin. Placed under the legs of the heaviest cabinets, such pieces helped to easily move weights on any surface, without leaving scratches and making this process easy to do.

The easiest way to move furniture is also just a wet cloth placed under a pair of legs, but this is provided that the floor surface is sufficiently smooth. There are also more advanced ways for those who like to move something around the house, like special protectors like the Bradex “Transporter”

There is a simple and most reliable method for moving heavy cabinet furniture. All other methods are good, but do not guarantee the main thing - the safety of the linoleum and the cabinet itself.

Ways to move a cabinet

Anyone who has had to move heavy furniture without assistance knows that this requires skill and a lot of strength. To make the cabinet slide freely, you must first move it from its resting place. To do this, you should completely empty the wardrobe of things, removable shelves, and secure the doors. To carry out a quick, simple cleaning of the room, wash the floor with any detergent to obtain a clean, free surface.

Adhering to the simple laws of physics, the cabinet begins to move when the points of contact between the surface of the floor and the bottom of the furniture are minimal, the flooring is smooth, and the product is empty. Taking this into account, the sliding of an object along the base of the room increases significantly, without causing damage to the floor covering. You can speed up the movement of a heavy cabinet on a flat floor to the right place using simple improvised means.

Raw potatoes

The simplest and most affordable way to move a cabinet is the well-known and beloved potato. The raw root vegetable is perfect as a sliding substrate on floors covered with laminite, linoleum, or parquet. Potatoes, depending on the tactics used to move the cabinet, are cut in two ways:

• circles 5 - 7 mm thick;
• into two parts.

By distributing the chopped root vegetable under the bottom of the cabinet, where the halves are placed cut side down, it can be easily moved around the room. The starch contained in potatoes, without leaving scratches on the floor, is a good lubricant for sliding. Remaining traces of starch can be easily removed with a damp cloth.

Wool rug

To make moving furniture easier, use a thick wool or felt rug. Despite the fact that this method is considered effective and does not require much effort, the preparation process itself is considered labor-intensive. It will take at least two people to tilt the cabinet back and pull the fabric underneath the base.

By evenly distributing the fabric, you can quickly move the cabinet across parquet and laminate floors. With light hand efforts, you can successfully pull it across the threshold of the room, while protecting the floor from scratches and damage to furniture. In addition to the rug, you can use a camel blanket or wool blanket.

To overcome the threshold without damaging it, it is necessary to place on it a slab of lumber 18 mm thick, equal to the width of the opening and a length convenient for rolling.

Nylon covers

One of the most common household items found in any household will help reduce friction when moving furniture - plastic covers. Soft, flexible substrates lubricated with wax or soap easily fit under the base of furniture and ensure smooth sliding.

Slightly lift the heavy cabinet and place the required amount of lids under the bottom and move it around the room with minimal effort. This simple device is reliable and extremely safe for any type of floor covering. As an alternative, milk bags made of high-strength polyethylene film, characterized by a high degree of slip and strength, can be used.

Paraffin, wax and laundry soap

It is no less effective to move a piece of furniture using paraffin or wax, which are irreplaceable items in everyday life and reliable helpers in difficult situations. Products used as a lubricant form a thin, strong layer on the surface, ensuring easy gliding. All you need to do is rub the floor with paraffin, wax or laundry soap along the previously outlined lines of movement.

A prepared soap solution from laundry soap and applied to the surface will also allow you to quickly carry out the planned rearrangement. Products are removed from the surface using warm water.

Furniture conveyor

Today, to make it easier to move heavy pieces of furniture, a special device has been created that allows you to independently solve the problem of rearrangement without physical costs or the services of loaders. With the help of a furniture conveyor, which is easy to maneuver, even in the smallest rooms, you can:

• move an item to any location;
• protect walls, floors, cabinets from impacts and scratches;
• save time on rearrangement;
• move quickly on any floor covering;
• move furniture with maximum weight.

The operating principle of a home mover is simple. The hardened steel lever with rubber handle lifts cabinets of any size and weight. Transport platforms with rotating platforms on eight wheels are placed under each corner of the product. The furniture is transported silently, neatly and quickly to the planned location in the room.

Travel Methods

Any method is based on the laws of physics, in particular, knowledge about friction and the operation of a lever.
That is, you should figure out how to tear the object off the floor and reduce friction when dragging the furniture mastodon. To prepare to achieve your goal, do the following:

• we remove the contents, remove the shelves, take out the drawers and lighten the cabinet as much as possible;
• wipe the floor with detergent and get a clean, dust-free surface;
• We tear off an object prepared for moving from its location using the principle of a lever, slightly pushing at the top from side to side.

The beginning has been made, let's move on to the most “interesting” part and determine how to move heavy furniture on linoleum or other not very durable coating without scratching it.

Read more about how to move heavy furniture on linoleum.

Rug

The proven old-fashioned method of moving heavy objects looks something like this:

1. Tilting it slightly, place the weight on a woolen or felt mat; a blanket or rug will do.
2. One participant in the process pulls the mat, the second pushes the cabinet.
3. It is better to overcome the threshold by swinging, then the object being moved seems to jump over the obstacle.

Nylon covers

Ordinary polyethylene lids for closing a glass jar can replace a felt mat. Having previously lubricated the sliding side with wax or soap, evenly distributing it around the perimeter, we place the substrates under the cabinet and easily move the item to the desired place.

Paraffin, wax and laundry soap

Having rubbed the path of movement with paraffin, wax or laundry soap until a thin layer forms on the surface of the floor covering, you can move the cabinet by lightly sliding along the resulting path. Grease is removed with warm water. To create a slippery path, a soap solution is suitable.

Furniture conveyor

You can rearrange furniture using a device sold in stores.

Using a furniture conveyor will allow you to:

• easy to transport heavy objects around the room;
• protect walls, floors, and furniture itself from damage and scratches;
• make rearrangements quickly on any floor covering.

The action of the “loader” is carried out using a steel lever and transport platforms with rotating platforms on wheels placed under the corners of the load.

Raw potatoes

As an alternative to a mat or plastic lids, raw potatoes are suitable, cut into circles 5-7 mm high or in half, depending on the method of transportation. The cutting is distributed under the bottom of the furniture and, by sliding, is dragged along the laminate, parquet or linoleum. Traces of starch can be easily removed with a cloth soaked in water.

Modern methods

To facilitate the lifting and placement of bulky pieces of furniture, lashing straps are widely used. The device consists of textile polyester tapes with a ratchet tensioning mechanism and fastening end fittings. Using the universal design, you can move a heavy cabinet either without legs or with legs. The belts are characterized by elasticity, lightness and ease of use.

A soft textile tape wraps around the cabinet and holds it securely when moving it. When using them, you only need to hold the portable furniture with your hands. The equipment is designed for two people. Lifting equipment is used as a jack for lifting furniture. The modern design, having a minimum thickness of the foot, is capable of lifting an object to a height of 14 cm.

To move a large cabinet, it is recommended to use a small dolly with a comfortable handle and nylon wheels that protect the floor surface from damage. Equipment that has been tested in practice does not require maintenance or additional assistants. Using this technique, movement occurs with minimal physical effort, regardless of the weight of the product and significantly saves time. The design, equipped with ball bearing discs, has the ability to rotate. When moving on uneven surfaces it can self-balance.

Precautions when moving furniture

When rearranging furniture, safety precautions must be observed. Compliance with the basic rules for lifting and moving large furniture reduces the risk of injury and falling cabinets. To do this, you need to calmly and rationally think through all the movements and evaluate your physical capabilities.

Basic conditions when moving furniture:

• do not try to move furniture that is too large without special devices or additional workers;
• the floor surface should be without obstacles, free from things, objects in which you can get entangled;
• Before moving, make sure that the available tools and devices are located correctly;
• Take a stable position, do not make sudden movements.

The risk of injury when moving large furniture increases if it is held inconveniently, or if the body is positioned incorrectly or moves. Most modern types of furniture can be disassembled, which allows them to be moved without much physical effort, but there are times when this is impossible. Using the help of friends or ordering the services of professional movers, you can successfully carry out the rearrangement without damage or injury.

Precautions when moving the cabinet

It is important to think in advance about how you will carry out the entire rearrangement process and assess your physical capabilities. Whatever work option you choose, you must remember safety precautions. Following simple rules when moving the cabinet will help you avoid injuries and other unpleasant consequences:

• first free the product from things and removable elements, secure the doors;
• wash the floor in the room and make sure that no objects interfere with you when moving;
• check in advance that all necessary supplies are available;
• do not try to lift and move heavy elements without special devices or additional working hands;
• Make sure the furniture is in the correct position while moving.

The risk of injury increases if you do not take a stable position and hold the furniture awkwardly. There is no need to rush or make sudden movements. It is also important to correctly assess your physical capabilities and ask friends for help or still hire a team of movers, because health is priceless.

Relevance of the problem

The biggest problem is associated with moving heavy furniture, such as a wardrobe, an old wardrobe or an oversized sofa. The main issue becomes safe movement in such a way as not to damage the floor covering. To solve this issue, there are a huge number of different methods that answer the question of how to move a heavy cabinet without legs alone and make it easier to move furniture without disassembling them.

Anyone who has encountered a shift at least once in their life knows that moving a heavy object requires strength and certain devices. You can, of course, remove all the things and disassemble the furniture, then moving it will be much easier, but it will take a lot of time.

It's no secret that a smooth surface is required for easy movement. These are the simplest laws of physics. Free movement requires minimal contact between objects, in this case the floor and the cabinet. This method eliminates damage to the floor covering. Using improvised means, you can move filled furniture.

How to move furniture without scratching the laminate using improvised means

Similar methods can be used to move cabinets on laminate or parquet floors. When using a lubricant, be sure to check the composition to ensure that it does not have a negative effect on the material. After completing the work, the remaining lubricant is thoroughly washed off the surface. Furniture stands and the use of a conveyor or trolley are also in demand, if possible.

Sometimes apartment owners use such exotic methods as placing old pants or wet rags, chopped potato slices, or pork skin. Treating the floor surface with soapy water is also considered a rational and effective method.

Despite the many options for independently rearranging furniture during renovation or moving, it is quite difficult to secure interior items and flooring on your own. In order to completely eliminate such risks, it is best to contact the Gazelkin cargo taxi. Our employees will quickly and efficiently complete the work, guaranteeing the safety of the property. The specialists arrive at exactly the appointed time, and the cost of the service is affordable for any client.

Each of us has had such moments in life when the need arose to move heavy furniture, be it a closet or a sofa. In this article you will find 5 tips on how to do this so as not to damage the floor covering and at the same time not to tear yourself.

Tip #1.

You can, of course, not strain yourself, but invite large and strong men from among your relatives and friends to visit, who will help you move the heavy furniture. If you simply drag furniture by hand, this can result in accidental damage to the furniture, stripped doorframes or the floor. And also injuries if someone puts a cabinet on their foot.

Tip #2.

To move heavy furniture around the apartment, you need to use any material that can slide on the floor: a rug, an old felt boot, and even simple slippers if you place them with the soles facing up.

Tip #3.

You can also use ordinary nylon covers (which can be found in any home) as a lining for the legs, if they are coated with paraffin on the outside for better sliding.

Tip #4.

If the floor is covered with floor tiles or linoleum, then any detergent (laundry soap, shampoo, dishwashing gel) can be applied to it. It will be easy to move heavy furniture on a slippery floor. The main thing is not to slip under yourself.

Tip #5.

For those who like to rearrange the furniture in their apartment too often, the Easy Moovs device will come in handy - it is a unique system for moving heavy furniture.

Using a special ergonomic lever, you can lift any furniture with very little effort. And by placing slippery pads under the legs of the sofa or the corners of the cabinet, you can easily move the furniture in any direction.

New, interesting and useful household goods from the TV Sale online store. The products are very popular. The range is constantly updated. Promotions are held and discounts are provided. Goods are delivered by mail throughout Russia and by courier in Moscow and the Moscow region.

The main thing is to follow basic safety rules when moving heavy furniture. It’s better to play it safe once again and not rush.

During general cleaning or renovation, there is an urgent need to move a heavy cabinet, chest of drawers or sofa. At such moments, you are afraid not only of scratching the floor, but also of inadvertently breaking your back. In order not to hire a team of movers, let’s get acquainted with homemade and store-bought devices that will help you simplify the painful process of transporting furniture around the house.

Potatoes cut in half

One of the most common methods for moving a cabinet is using potatoes. Only raw material should be used. It is excellent as a sliding backing and furniture can be moved on linoleum, laminate or parquet without much difficulty. Depending on the dimensions of the furniture, you can use one of the options and easily move the furniture to the required area of ​​the room:

1. Circles 1-2 centimeters.
2. Half a potato.

If the cabinet is huge, it would be better to use circles; they are thin and placing them under the bottom of the cabinet is much easier. If we are talking about a small cabinet, you can use half a potato.

Due to the starch contained in the product, potatoes become an excellent lubricant for rearranging. Of course, marks remain on the floor, but they can be easily removed with a wet cloth.

Linoleum: material features

Before we talk directly about moving furniture on a material such as linoleum, you should understand what kind of material it is and why you should be careful when carrying large items over it. Despite the general unpretentiousness of this coating and its time-tested reliability, it is important to handle the material carefully so that its service life, declared by the manufacturer, ends prematurely.

Linoleum is one of the popular floor coverings, which is produced in the form of rolls of various widths and is currently made most often on the basis of synthetic components. This material has a long history, if you go back to the very origins of its appearance. Initially, it was made on a fabric base, impregnated with ordinary vegetable oils - this format of the material dates back to the 19th century. In the 1950s, more modern types of coating were developed, which began to be produced on the basis of PVC.

On a note! At the beginning of the twentieth century, the largest producer of linoleum in the whole world was the Russian Empire. It lost its position after the October Revolution.

Now the largest manufacturer of linoleum is the Tarkett company, which has factories in Russia. But the building materials market offers products from other equally well-known brands. What their products have in common is the following - linoleum is produced in the form of large rolls with a width from 50 cm to 5 m, and the length of the canvas inside them is from 6 to 45 m. Moreover, the thickness of the material, depending on the class, varies between 1.5- 5 mm. There are also denser types of linoleum, their thickness is about 8-9 mm, but such options are rarely used for domestic purposes. They are usually used in warehouses and production facilities where the material is subject to significant stress.

In general, modern linoleum is not a homogeneous material; it consists of several layers:

• varnish top layer , which gives the coating shine;
• a protective layer that prevents damage to the color and texture of the material;
• decorative layer (often made of PVC), responsible for the appearance of the coating;
• fiberglass - the base, a kind of “spine” of the coating, providing tensile strength;
• base made of PVC;
• sometimes the last layer of material is fabric , which increases the heat and sound insulation properties of the coating.

The flexibility of linoleum and its elasticity, heat and sound insulation properties, and density will depend on the PVC layer. It can be called the basis of the material.

Basic properties of linoleum

Despite such a large number of layers, linoleum remains a fairly soft and elastic material, which is quite easy to cut, easy to install, but at the same time very durable, not afraid of moderate mechanical impact and does not wear out.

Wool carpet

To facilitate the movement of the cabinet, use a small carpet made of felt or wool. The method itself is effective, but it requires 2 people to implement it. One person will not be able to simultaneously tilt the furniture and push the carpet under the bottom.

After the fabric has been distributed, we apply little effort to push the cabinet and movement on parquet or other slippery surface will not interfere with anything. Thus, you can carry furniture over the thresholds (if the doorway allows).

For those who do not have such a rug, a plaid or blanket made of camel hair will do.

Can lids

To slightly reduce the level of friction between moving furniture and the floor, you will need common items that can be found in every home. We are talking about flexible linings (plastic covers made of durable polyethylene).

We lubricate them with soap or paraffin and place them under the bottom of the cabinet. Depending on the dimensions of the furniture, the required quantity is determined. And after that, without making any effort, move the large item to another place.

Modern devices

In today's world, reshuffling is not a huge problem. There is a special device that does not require physical effort and solves the problem of rearranging furniture, even in small rooms.

A special conveyor provides:

• moving any furniture to the required place;
• protection of surrounding surfaces from external influences and damage;
• saving time;
• implementation of quick rearrangement on any floor covering;
• movement of even the heaviest and largest furniture.

This device is called a home loader. The device is a kind of platform and platform that rotates on wheels. Using a lever, the product is lifted and moved to any place without additional physical effort, without making any noise.

There are other transport methods. For example, a tension belt. This is an ordinary polyester tape, which has a special tension mechanism and is attached using end fittings. Of course, such a device is designed for two people and does not require much effort to carry; you just need to clasp the object with your hands, thus holding it. This method allows you to rearrange any furniture, both with and without legs.

Precaution.

When you carry out such manipulations, you need to adhere to safety measures so as not to get injured. Think through all your actions in advance, realistically assessing your strengths.

Rules for rearranging:

1. Move heavy and large furniture only with the use of “extra hands” or special devices.
2. Clear the room of unnecessary objects on the floor so that moving does not turn into a race against obstacles.
3. Make sure nearby objects are placed correctly.
4. Do not make sudden movements, take a stable position.