How to install a cabinet under a suspended ceiling: expert advice


How to connect a wardrobe with a suspended ceiling

I already touched on the topic once on our website - Sliding wardrobe and suspended ceiling: what to do first?

Briefly, I tried to tell you where to start. Now it’s time to touch on the technical side of joining a stretch ceiling and a wardrobe. Let's look at the various options, supported by the pictures that I drew for you in the PRO100 program. OPTIONS 1. You decided to install a built-in wardrobe in front of the suspended ceiling. Let's assume the total depth of the cabinet is 600mm. We make a box for a stretch ceiling from laminated chipboard. Usually a height of 100mm is sufficient, the depth should be at least 100mm. Picture 1. Using dowels, we attach the resulting base to the ceiling. You don’t have to worry about the strength of the structure; it can easily withstand the tension of the canvas and the weight of the upper track. For those who don’t know, I’ll add that the upper track acts as a guide; the compartment doors do not weigh on it, but ride along the lower track. The box is secured, then we begin assembling the wardrobe and inserting the doors. Pictures 2, 3.

After the cabinet is ready, other craftsmen stretch the ceiling. Usually it takes up 4-6 centimeters from the total frame height of 10cm. Picture 4. This is what the suspended ceiling looks like adjacent to the closet. Picture 5. 2. You decided to make a suspended ceiling, and then a wardrobe. Installation of a wooden block 100 by 100 mm. This option is essentially similar to the first option. The difference is that you yourself will attach a block of wood to the ceiling, and a stretch ceiling will be attached to it. Picture 6. You can order a sliding wardrobe later, at any time. Don't forget to correctly calculate the depth of your closet! I told you earlier how deep it should be, you can read -. The top track occupies 100mm. You can treat the block with putty and paint it. When you get a suspended ceiling, call us, we will assemble a wardrobe. Picture 7. There is another option for attaching the top track for doors. We can attach the aluminum guide to the beam itself and hide it. The main thing is that the timber should not be more than 100mm high. otherwise we won't be able to fit the coupe doors into the track. Look how it might look in the pictures: 8, 9, 10, 11. A similar option may be suitable if the ceiling is multi-level made of plasterboard. Look at picture 11. Sometimes we are asked to cover up an unsightly ceiling that is visible inside a closet. Then we make the ceiling from chipboard. In my opinion, it is better to improve this area yourself, paint it, whitewash it. You will simply lose useful height area. Picture 12. 3. First of all, you decided to make a suspended ceiling, but under the canvas, you installed a beam for the upper track. Once we attached an aluminum track to a block that was hidden under a suspended ceiling. The owner successfully calculated its height, thanks to which the ceiling panel did not push upward and everything looked natural. Using self-tapping screws, we secured the aluminum guide to the block through the suspended ceiling. Picture 13. 4. You have already made a stretch ceiling. Now you need to install a built-in wardrobe. In this case, there are two options for installing the cabinet. You can make a frame for the top aluminum guide from laminated chipboard. Pictures: 14, 15, 16. Watch the video of how we make the frame for the top track.

It is possible to make a ceiling from laminated chipboard inside the wardrobe and attach the top track to it. Picture 17. In the first case, you will have a ceiling inside the same color as in the room, it’s beautiful. But remember that a suspended ceiling can be easily broken through by things that you will place on the upper shelves. For example, these are cardboard boxes with shoes or skis. In the second case, the suspended ceiling inside the cabinet will be protected from possible breakthroughs. Decide for yourself which option suits you best. In both options we do not pierce the ceiling, it remains intact. I have listed the options we have tested for combining a wardrobe with a suspended ceiling. You must decide for yourself whether you leave space for a wardrobe of a certain depth and install a mortgage on the ceiling, or make a suspended ceiling around the entire perimeter, and we build a frame for the upper track. Or maybe it’s worth making a built-in wardrobe first, and attaching the ceiling to it. I wish you to find your artist and get the furniture you dreamed of! Designer: Eduard Sukhanov

Stretch ceiling or wardrobe: where to start?

The problem of the order of work has affected almost everyone who has made repairs in their apartment. If you want to install a cabinet with suspended ceilings in a room or hallway, the question always arises: where to start?

Installation of a stretch ceiling can be carried out both before and after the installation of the wardrobe. But on the contrary, the scheme no longer works. One of the most important points is the exact determination of the location for the future cabinet. In the future, this will, first of all, help you when marking the place for the lamps.

It is possible to carry out installation using an embedded beam, as well as without it. Most repairmen suggest doing the ceiling first, and only then installing the doors. Builders have four options for connections.

There are several methods for installing a sliding wardrobe and tension fabric, which differ in the method of fixation and the presence of a mortgage.

You will need: a wooden beam, guides, special aluminum fasteners - a wall molding or a harpoon system for installing the ceiling sheet. One of the most convenient, practical and universal methods is to install two fastening systems that will not depend on either the ceiling panel or the doors. In this version, the suspended ceiling can be installed at any time.

Installation process: Door guides are attached to the main ceiling. The next stage: a beam is installed along the ceiling, which holds the profile. Special fasteners for the future tension fabric are installed on it from the side of the cabinet. As a result, the tension fabric will completely cover the block, and the installation of the sliding wardrobe can be done both at the first stage of work and at the last.

It is important to know that when installing this system, you need to know the exact dimensions of the depth of the future cabinet. Thanks to the accuracy of this parameter, it will be easier for you to calculate the distance for attaching the beam. Another important point is to take into account the presence of lamps, since this determines how much the tension fabric will have to be lowered.

The ceiling panel must be lowered by at least 4 centimeters. The height can be increased when installing non-standard lamps or the presence of large differences. The distance to which the bar will be attached directly depends on the location of the tension fabric.

You will need: timber, decorative panel, stretch ceiling fasteners, door guides. First comes the installation of the cabinet. To do this, you will need a false panel (preferably matching the cabinet), a wooden block, and door guides. First of all, install a decorative strip or false panel. In the future, we will attach the ceiling sheet to it. To make the plank more stable, it must be strengthened by attaching the timber to the main ceiling. We mount door guides to the timber.

In this option, the installation of the plank must be done strictly according to the level, because the ceiling itself will also be mounted according to it in the future. Work must be carried out so that the ceiling and false panel are parallel to each other. The height of the false panel directly determines how much you lower the ceiling.

A false panel or decorative tape is snapped into the wall molding after the stretch ceiling is harpooned. The use of glue in this embodiment is not necessary.

You will need: wooden beams, door guides, plastic inserts. First you need to install the ceiling canvas, and then the furniture. The wooden beam must be attached to the main ceiling. Then you need to install the ceiling sheet. The beam remains between the main and suspended ceilings. Then special plastic inserts are inserted into the canvas at the location where the timber is installed, and then the door guides are installed.

Before installation, decide where your timber will be located. This distance will become the depth of your wall.

In this option, the tension fabric is installed around the perimeter of the entire room. Changing it over time will be problematic, since you will have to disassemble the built-in doors.

You will need: a cabinet with a top lid. Leaving a gap is one of the easiest installation methods, since both the cabinet and the ceiling are independent of each other. First you need to install the ceiling. Then a wardrobe with a top lid. In this version, work must be carried out extremely carefully. For example, when installing a cabinet, you may catch the ceiling and tear it. This method is also suitable for a hallway with a suspended ceiling. There will be a special plastic plate between the ceiling and the cabinet doors. It must be glued so that the ceiling fabric does not tear or stretch in the future.

This pairing is more suitable when the furniture serves as a wardrobe or storage room.

If you already have a suspended ceiling in a room without a mortgage, then installing a wardrobe is limited to only one option - you can only install a wardrobe with a top lid. If the gap between the ceiling and the furniture is less than 5-10 centimeters, then the process of installing the cabinet must be carefully monitored, since one awkward movement can cause the film to be deformed.

If you have a mortgage for a built-in wardrobe, you can use several options for installing the film. It is important to remember that in this case, special plastic inserts are required, the installation of which will not damage the ceiling during door assembly work.

Installing a ceiling panel on a mezzanine is not as difficult as it seems at first glance. If the height of the mezzanine doors touches the main ceiling, then the mezzanine needs to be redone so that a top panel appears. To do this, you will have to saw off 8-10 centimeters from the top of the mezzanine doors. Chipboard or “plywood” must be attached to the top of the doors.

Electrical work is performed at the stage of installation of the mortgage. This also applies to marking the location of lamps on the future ceiling and their installation in the closet. For lamps in the wardrobe, choose LED or halogen lamp models.

One of the most important recommendations is to calculate in advance where the closet will be located in the apartment, whether it will be built-in or just reach the ceiling. If you decide to install a sliding wardrobe in a niche, then opt for the built-in option.

Call competent measurers who will make the correct drawing of the future cabinet and indicate the location for the mortgage. In this case, the cabinet is first installed, and then the craftsmen stretch the ceiling fabric.

Built-in furniture allows you to reduce the cost of the closet itself - you do not need to purchase a whole closet in the store, you just need to buy sliding doors, a false panel, guides and a block. When installing doors to a finished ceiling, repairing the latter in the future will be very difficult, since both the canvas and the cabinet are strongly interconnected. If you want to replace the ceiling, you will have to disassemble the cabinet.

To hide a small gap between the ceiling and the doors, you can use a ceiling plinth. As a result, you will achieve structural integrity.

Builders do not recommend installing a cabinet on a finished suspended ceiling for several reasons: damage to the film when attaching the cabinet to the canvas; no savings - you pay for a full cabinet and for the ceiling, and in the case of built-in models you have to pay for cabinet doors.

When installing a frame cabinet, you first need to install the panel. Work must be carried out level to take into account the distance from the floor to the ceiling. The advantage of free-standing furniture is that it can later be disassembled and transported to a new home without damaging your own wallet.

An important point during installation work is the level relationship between the furniture and the ceiling panel. The stretch ceiling line should run parallel to the line of the cabinet and the line of the window. If the cabinet or window is not level, then it is better to stretch the canvas parallel to these elements. As a result, you will achieve that visual deviations will be practically invisible.

Designers and builders believe that the classic combination of cabinet and ceiling is the independent installation of the ceiling panel from the doors. This option will allow you to get rid of any restrictions on rearranging furniture in the future.

Sliding wardrobes are most often installed in the bedroom or hallway. In a simple, bright room, the models will match any ceiling. At the same time, the cabinet doors themselves can be made of various materials: glass, PVC, wood. Their combination gives you the opportunity to create an unlimited number of interior options.

Today, designers have found ways to beautifully fit large wardrobes into a living room without compromising the design - soaring multi-level ceilings match mirrored doors. You can achieve a visual enlargement of the room using glossy PVC ceilings. You can complement the design with a cabinet with internal lighting.

www.stroy-podskazka.ru

How to install a wardrobe with a suspended ceiling

Repair is a complex process that can take months, and sometimes even years. The reason for this is, first of all, incorrect planning of the work sequence and, as a consequence, a huge number of shortcomings and problem situations, the resolution of which requires a lot of time and money. To get rid of unnecessary hassle and make repairs as quickly as possible, you need to clearly understand how and when to do this or that work.

One of the most common problems is installing a wardrobe in a room with a suspended ceiling. Many people make mistakes at this stage of repair, and to avoid them you need to think about the following things:

  1. Which wardrobe should you choose?
  2. What are the features of installing the selected cabinet?
  3. What's next, a wardrobe or a suspended ceiling?
  4. How to install a closet with a suspended ceiling?
  5. How to combine a wardrobe and a suspended ceiling?

You will find out the answers to all these questions below.

How to combine a built-in wardrobe and a suspended ceiling?

IT news

Remember how all apartments used to have furniture that covered an entire wall, and even now some still have it in use. And how difficult it was to get one, you had to wait for your turn for months. Is it practical? Despite its large dimensions, such a wall brought little benefit; it only occupied the already small space of the rooms.

Such furniture has been replaced by comfortable and practical wardrobes. They take up much less space, but are much more spacious than the old walls. Moreover, such cabinets can be installed directly under the ceiling. Now about the ceiling: nowadays people increasingly prefer stretch ceilings. This is not surprising, because they have many advantages:

  • attractive appearance;
  • do not require preliminary labor-intensive preparation of the base flow;
  • have a long service life;
  • retain their qualities throughout the entire service life.

When the owner opts for a built-in wardrobe and suspended ceiling, he immediately faces a dilemma: what to install first and how to combine it correctly?

Methods of combining a wardrobe and a suspended ceiling


There are two options based on which methods for installing a built-in wardrobe and suspended ceiling are selected:

  1. In the first case, the room is under renovation and there is no furniture in it, but the suspended ceiling has already been installed.
  2. In the second case, everything is the other way around: there is a closet, but no suspended ceiling.

Here you will immediately ask: what to do if the room is at the initial stage of renovation and there is nothing in it yet? In this and in the previous two cases, you can proceed as follows, which involves different options for placing the built-in wardrobe and suspended ceiling in relation to each other:

  1. Sliding wardrobe and suspended ceiling as independent elements. This method assumes the existence of these elements separately from each other. In other words, the cabinet can be installed at any distance from the ceiling or close to it. This is the most practical method, because at any time you can change the cabinet or linen without touching another element. Installation tip: if you decide to leave a gap between the canvas and the cabinet lid, then take into account the fact that over time you will have to clean it, and a distance of a few centimeters will not allow this.

  2. Placing a stretch ceiling inside a closet. As practice shows, this method is quite interesting. Here the suspended ceiling passes through the cabinet niche. This is very convenient, because this way you can increase the usable volume of the cabinet by raising it to the ceiling. At the same time, if you carry out the wiring in advance, you can connect lighting in it. At the first stage, the cabinet frame is prepared, a suspended ceiling is installed, and at the end sliding doors are installed.

  3. Wardrobe in the ceiling. This method involves installing a stretch ceiling from the door of a built-in closet. However, it does not have a lid, and its walls reach the base ceiling. Here you will need a wooden beam to create a base to which the suspended ceiling will be attached.
  4. Using a false panel for a wardrobe. First of all, you need to install the cabinet and false panel, and then the suspended ceiling, which should be attached to it. The convenience of this method lies in the fact that at any time you can dismantle one of the elements without damaging the other.
  5. Everything from scratch. In this case, you can use all room design options. But in advance you need to think through everything to the smallest detail, make accurate measurements and calculations. If you can’t do it yourself, invite specialists from the furniture company and from the ceiling company at the same time. Since every detail is important, a difference of even up to 1 cm can play a fatal role, for example, the sliding system will not work well or the doors will not fit into the opening at all.

Conclusion

As you can see, combining a built-in wardrobe and a suspended ceiling is not so difficult. If you are a “jack of all trades,” then the lion’s share of the work can be done yourself without spending extra financial savings. And, in fact, you can install a suspended ceiling yourself if you have somewhere to rent the necessary tools. Well, if doubts creep into your mind that you will not be able to cope with the task, or you are completely a “dummy” in these matters, then feel free to call the Time Sealing company. Our specialists have extensive experience in carrying out this type of work and will be happy to help you.

What difficulties may arise when installing a wardrobe in a room with a suspended ceiling?

There may be many problems, but all of them can be easily solved with careful planning at the beginning. Here are the main problems that may occur:

Installer mistakes

No matter how confident you are in the company that is doing your repairs, workers are different. Installing a wardrobe in a room with a suspended ceiling will not be the easiest task even for an experienced craftsman, let alone inexperienced installers. Careless handling can easily damage the ceiling. All this will lead to the waste of not only nerves, but also money, and a lot of it.

Limitation when choosing a cabinet

It is not always possible to install a wardrobe and a suspended ceiling together. It is quite possible that the option that you really like will turn out to be unsuitable for installation. This condition significantly narrows the number of cabinets from which you will have to choose.

Gap between ceiling and cabinet

Since nothing can be attached to the film, there will be a gap of several centimeters between the cabinet and the ceiling. This gap will quickly become the site of a huge amount of dust. It will be almost impossible to wipe it off, since the gap is very narrow. In addition, this gap will take up extra space, which means there can be no talk of rational use of the space in the room.

Overpayment for hidden ceiling meters

A stretch ceiling is, in principle, an expensive pleasure. For every square meter of high-quality stretch ceiling you will have to pay a considerable amount. In such circumstances, it will be very irrational and wasteful to hide several square meters of the ceiling with a wardrobe. It turns out that you paid for these hidden meters, but they are of absolutely no use.

Installing a wardrobe in a room with suspended ceilings is often very irrational. But sometimes that is the only possible way. Therefore, in order to avoid such problems, everything needs to be planned in advance.

Scheme of installing the cabinet before installing the ceiling

How to combine a wardrobe and a suspended ceiling (video)

Combining a stretch ceiling with a built-in wardrobe is a very real task. The main thing is to think in advance which installation option for this structure is right for you, and experienced craftsmen will help make your dream come true.

A smooth, durable film of suspended ceilings is quickly installed and hides the imperfections of the ceilings. However, when combining a wall-mounted structure with full-wall furniture, difficulties arise.

In order for the wardrobe and suspended ceiling to look harmonious, you need to take into account the installation order.

Options for installing suspended ceilings and sliding wardrobes

There can be many options, and below we will talk in detail about each of them. But before examining the features of each option, you need to understand what types of sliding wardrobes there are.

Despite all the external diversity, there are only two types of sliding wardrobes:

To the ceiling

These are cabinets whose guide rails are attached directly to the ceiling.

Independent cabinets

These cabinets do not require ceiling mounting. They are a complete structure that can be assembled regardless of the ceiling height.

These are the two main types into which all sliding wardrobes are divided. When choosing an option to combine a built-in wardrobe and a suspended ceiling, choosing the type of cabinet is a very important point.

Now let's take a concrete look at what options for installing a sliding wardrobe and ceiling there may in principle be, and what is more profitable to install first.

Sliding wardrobes built under a suspended ceiling, separate design

During a phased renovation, many questions arise regarding the combination of how to combine a suspended ceiling with a compartment? Should a wardrobe or suspended ceiling be installed first? Indeed, in addition to the aesthetic relationship between the sliding wardrobe and the tension covering, it is necessary to comply with the technology of their installation. This is the only way for the cabinet element to create a monolithic unity with the film object; these are completely separate elements. Furniture is ordered on the basis that a baguette will be attached between the top of the cabinet and the base of the ceiling. The designs of compartment built-in suspended ceilings have a beautiful aesthetic appearance.

Installing a cabinet with an installed ceiling

A sliding wardrobe under a suspended ceiling is often sought by people who did not bother to plan the renovation in advance and are now forced to look for a way out of the current situation. Nevertheless, the situation is not critical and it is quite possible to find a good way out of it, which will not only suit you, but may even be better than other options. To better understand the essence of installing a cabinet under a suspended ceiling, let's look at its pros and cons.

Pros:

  • Allows you to install a ready-made wardrobe without touching the ceiling
  • Installing an independent sliding wardrobe is often cheaper
  • When moving, an independent sliding wardrobe can be disassembled and assembled at a new place of residence

There are not many advantages, and most people may not even agree with them. But, nevertheless, in a hopeless situation this is far from the worst option. For the sake of objectivity, let's now turn our attention to the disadvantages.

The video clearly shows the process of installing a cabinet with a suspended ceiling installed:

Minuses:

  • The gap between the closet and the ceiling, which will be the main dust storage in the apartment
  • Wasteful use of space
  • Overpayment for unused meters of stretch ceiling
  • Limited selection of cabinets

The disadvantages turned out to be more convincing, and this is not surprising, because the work will be of the highest quality and rational only when it is thought out and planned in advance.

Sequencing

In the case when the project is carried out “from scratch”, everything must be done at the same time, that is, decide on the type of furniture and hanging fabric, their relative position, and think through lighting options. Then call specialists from these areas at the same time and agree on all the nuances so that there are no misunderstandings during installation.

It is necessary to do everything strictly according to the level, since the difference in height between the floor and ceiling tiles at different ends of the room will be different. If this is done carelessly, such errors are very noticeable and enhance visual perception. As a result, you will end up contemplating the picture of a “crooked closet under a sloping ceiling.”

READ MORE: Juniper pillow: beneficial properties, how to use

If all operations (measurements, manufacturing of cabinet parts and suspended ceiling elements, installation of both) are carried out with high quality, and the external design, including the color scheme of the room and lighting fixtures, is chosen with taste, you will enjoy being in a cozy apartment, and you will be able to do not hesitate to invite the greatest aesthetes to visit.

For clarity, we present a video of one of the options.

In this article, we did not focus on installing the tension fabric directly, since everything is done according to the standard scheme and the difference lies in the presence and absence of a mortgage, as well as the methods of attaching baguettes to it.

We hope you found this article helpful and would be grateful if you would share it on social media.

Happy renovation! NICOMAX – Your suspended ceilings.

Installation of the cabinet, followed by installation of the ceiling

This option is the most rational. That is why experienced builders, when planning work on site, most often prefer to first install a cabinet, and then a suspended ceiling. As you know, everything is learned by comparison, so we will also consider this option, both from the positive and negative sides.

The ceiling mount is attached to the false panel of the cabinet

Pros:

  • A full range of all kinds of sliding wardrobes is at your disposal. With timely planning, you will be able to choose exactly the cabinet that you like best and which you find most convenient. Now you don’t need to think about what type it will be, any type will be installed.
  • Rational use of space. Cabinets up to the ceiling are the best option as they are strong enough and don't leave any gaps. But even if you choose an independent cabinet, its location will also be chosen specifically so as not to leave gaps. To solve this problem, use a box for a suspended ceiling for a cabinet made of chipboard.
  • Installers are less likely to make mistakes during installation, since now the assembly will be much easier and more convenient. Now even inexperienced craftsmen are unlikely to be able to damage anything.

All these advantages are quite significant arguments in favor of choosing this installation option. However, things are not always so wonderful. To have the most complete and objective picture possible, let's look at the disadvantages.

Minuses:

  • Difficulties with decorative strips.

Often people choose a wardrobe not for practicality, but for appearance. According to this criterion, cabinets with decorative strips above the rails usually win. The point is that you cannot attach a suspended ceiling to such a plank, which means you will have to put a timber overlay on it. Because of this, beauty often disappears.

There was only one minus, and this is quite objective, because this method is the most common and most rational.

How to install a cabinet under a suspended ceiling: expert advice

To design modern interiors, professional designers and customers try to choose the most original and functional solutions. In order to make the most of the space in a room, many people prefer built-in furniture and cabinets that reach right up to the ceiling. However, such furniture often causes a lot of difficulties, in particular related to the design of the ceiling space. So, if you have chosen a suspended ceiling for your interior, it will be quite difficult to install a cabinet under it. In this material we will consider the most optimal options for combining these two interior elements.

Note!

AstamGroup is a manufacturing company that has more than 10 years of experience working with tensile structures. Over the years of practice, our masters have learned to solve even the most seemingly incredible and complex problems. If you need to install a structure of a non-standard shape or finish the ceiling in a room with built-in furniture, contact AstamGroup! To call a surveyor to the site, you just need to follow the link and fill out a special form.

How to properly place a cabinet under a suspended ceiling?

Very often, customers want to install a cabinet in a room that will reach the very ceiling. There are also cases when the installed furniture does not reach the rough ceiling a little, however, when installing a tension structure, the ceilings become lower. As a result, the cabinet may end up under a suspended ceiling. How to finish the ceiling space correctly and get the perfect result?

This problem can be solved in several ways.

  1. By creating a bypass design. To bypass the closet with a suspended ceiling, you need to build a special structure. We will look at its features a little later. It is important to remember that walking around furniture requires precise knowledge of installation technology and its adherence. Otherwise, you may damage the materials and you will have to spend money on ceiling decoration again.
  2. Secure the cabinet doors to the guide. If you want to place a built-in wardrobe with doors under the ceiling, then this solution is the best option. To implement this idea, a special mortgage should be installed on the rough floor. It will serve as the basis for attaching the cabinet doors. The structure is installed in this way: a wooden beam is attached to the base ceiling. It should be located almost close to the future suspended ceiling. If the width of the beam is not enough, it is installed on additional metal hangers. Then the fabric is stretched onto a profile frame installed around the perimeter of the room. After this, thermal rings are glued to the ceiling in the place of the embed (when using PVC film) and holes are made for self-tapping screws. Guides are screwed to the mortgage along which the doors will move. This option of installing a cabinet under a suspended ceiling is only possible if built-in furniture is used, and the height of the doors exactly corresponds to the distance from the floor to the stretched fabric. Otherwise, you will either have to install a bypass structure or trim the sashes to the required height. To carry out this work, you should definitely call professionals.

For your information!

To get a perfectly flat ceiling structure and correctly combine a cabinet with it, it is much more convenient to first determine the height of the stretch ceiling, and then order furniture. If the furniture is already installed, a bypass design is the best solution.

How to bypass a cabinet with a tension structure?

In most cases, installing a cabinet under the ceiling requires a special design. This solution allows you to solve the problem of installing a ceiling in a room with installed furniture in the shortest possible time. Work is performed in accordance with the following algorithm:

  1. A frame made of wooden beams should be installed on the rough floor. Its height must coincide with the height at which the profiles are installed around the perimeter of the room. If you need to lower the frame lower than the height of the beam, metal hangers or corners are additionally installed. Wooden planks can also solve this problem. As a result, the frame should be positioned slightly lower than the top of the cabinet.
  2. You need to screw the ceiling profile to the wooden mortgage. Its installation begins from one of the corners of the bypass structure. The profile is mounted at the bottom of the beam. It is important that this additional design completely matches the shape of the cabinet.
  3. Subsequently, the craftsmen need to prepare mortgages for spotlights and chandeliers. To do this, plastic platforms are mounted on hangers on the rough floor.
  4. Having straightened and, if necessary, heated the canvas using a heat gun, you can proceed to stretching it. You need to start attaching the material starting from the corners of the room. Then you should tuck the canvas into the profile, which is located in the corners of the bypass structure. After this, the covering is attached in the central parts of the walls and in the center of the bypass structure around the cabinet. Then you can fill in the remaining material. This sequence of work allows you to obtain maximum uniform tension.

This design makes it possible to install the cabinet under a suspended ceiling. The canvas will reach the closet and bend around it beautifully. The absence of gaps between the ceiling covering and the furniture makes it possible to avoid dust getting into the space between the ceilings.

Good to know!

Such bypass structures can be used not only to bypass the cabinet, but also to install other furniture behind the canvas. They also allow you to bypass elements of air ducts and air conditioning systems. You can find out how to cut a ceiling profile in the corners of a bypass structure and go around a cabinet with a suspended ceiling by watching a special video on our Youtube channel.

You can place an order for the installation of a suspended ceiling in a room with an already installed cabinet at. Our experienced specialists will select the most optimal solution for combining furniture with ceiling structures. If you have any questions regarding ceiling finishing, please contact our managers.

See also:

  • How to install a cornice under a suspended ceiling? Recommendations from company specialists...
  • Which stretch ceiling is better to choose? Expert advice
  • Which stretch ceiling to choose: glossy or matte? Expert advice
  • Is it possible to make a stretch ceiling yourself? Advice from AstamGroup specialists
  • What color to make a suspended ceiling - advice from Astam Group specialists.
  • Is it possible to make a built-in wardrobe if the ceiling is suspended? (video)

Fastening the cabinet to a suspended ceiling

This method is rarely used, but it also has a right to life. The essence of it is that before installing the ceiling, a beam or a cabinet insert is attached between the concrete and suspended ceiling. The sliding wardrobe rails will subsequently be attached to this beam. Many people believe that this way the ceiling can be damaged, but in fact this is not the case. The surface of the stretch ceiling is quite strong and, with the right approach, several screw holes will not cause any damage to it.

This option is not very common, since it wastes extra meters of the stretch ceiling, despite the fact that everything is planned in advance. This is irrational, and when planning this option is most often rejected.

Stretch ceiling or closet – what to do first?

If you follow the long-established repair rules, then all work is performed from top to bottom. Usually the ceiling is done, then the walls are finished and the final stage is the installation of the floor and the placement of furniture. As for the combination of a suspended ceiling and a cabinet, you can start with any of them. There are 2 types of coupes, which affects their installation options:

  1. Frame. They are a collapsible structure that can be easily dismantled and reassembled in another place. In this case, it is advisable to tighten the film first.
  2. Built-in. A static structure that is permanently in one place and is attached to the wall. When forming the ceiling, a special strip is attached to such furniture.

The second option requires a professional approach. A properly installed plank will ensure the integrity and attractiveness of the structure.

How exactly are the different types of cabinets installed?

So, we’ve sorted out the options for the sequence of work, now let’s talk in more detail about the process of installing certain types of sliding wardrobes.

Each type has its own installation features. Now we will look at the main types.

Cabinets with top to ceiling

The peculiarity of such cabinets is that they are ordered and installed most often after finishing work on the ceiling. There are several reasons for this. Firstly, the height of such cabinets varies depending on the wishes of the client. Therefore, before ordering a cabinet, you need to know exactly the height of the room, but you won’t be able to find out this before installing the stretch ceiling. Secondly, it will be extremely inconvenient for installers to install the ceiling if there is this cabinet in the room.

The process of assembling such a cabinet is quite standard, and the end result is a structure that rests evenly on the suspended ceiling and does not create any gaps.

Cabinets with a guide rail designed for mounting

The peculiarity of these cabinets is that the guide rail must be fixed to something. Naturally, it won’t be possible to attach it to a suspended ceiling, because you need something solid and immovable.

Most often they prefer to attach such cabinets directly to the concrete ceiling and only after that install a suspended ceiling. This is the most effective and rational option, as it saves square meters of stretch ceiling and leaves no space for gaps.

The stretch ceiling is attached to the strip in front of the cabinets, so the cabinet stands in a niche

There is another option, in which a beam or mortgage is installed under the wardrobe in the suspended ceiling to fasten the rails. The rails are attached to this beam with a regular screwdriver through the suspended ceiling. There is no need to worry about the ceiling tearing or being damaged in any other way. An experienced master will be able to do everything correctly and cleanly. However, if after the completion of the repair you have problems with the ceiling, you will not be able to contact the company that provides the guarantee. Warranties are provided that the surface has not been damaged and you already have holes in it. Accordingly, there can be no talk of any return.

Cabinets with decorative strips above the rails

Decorative strips look very beautiful and can be found both on cabinets up to the ceiling and on independent cabinets. However, their peculiarity is that a suspended ceiling cannot be attached to them. Practicality suffers greatly from this.

To solve this problem, installers usually place an additional beam along the plank. Often this beam spoils all the beauty, so if you decide to install a cabinet with a decorative strip, try to install the ceiling across the entire width of the room before installing the cabinet. In this case, with correct calculation, the bar will just reach the ceiling. Then it will look quite beautiful, and at the same time will not leave an unnecessary gap.

Installation of an extension or a mortgage under a cabinet:

Assembling the wardrobe after installing the ceiling, the structure is attached to the mortgage nailed in the previous video:

Options for joining a stretch ceiling and a sliding wardrobe

Sliding wardrobes, dressing rooms, kitchens to order in Kaliningrad. And also a lot of useful information about furniture.

Helpful information

Ordering a sliding wardrobe
Order a kitchen
Drawer guides
Wardrobe doors
Photos of sliding wardrobes and cabinet furniture
Wardrobe design
Storage of sliding wardrobes
Glass and mirrors in wardrobe design
Wardrobe lighting
Filling the wardrobe
Types, design, location of the sliding wardrobe
All about dressing rooms
DIY furniture
Home storage ideas
DIY kitchen
Photos of kitchens
Styles and kitchens
A collection of ideas for the kitchen
Kitchen ergonomics
Color in kitchen design
Rainbow colored kitchens
Achromatic kitchens
Railings for the kitchen
Interesting things in the world of furniture
DIY interior items

Well, if you didn’t plan it, or you already have a wardrobe and you decide to make a stretch ceiling, what to do? We will consider solutions for pairing a sliding wardrobe with a suspended ceiling below in the article.

First, a little theory about the profiles (baguettes) that are used for installing a stretch ceiling and the general design of a stretch ceiling. This will help you analyze and understand the options for joining a stretch ceiling and a wardrobe, and you will decide for yourself whether to make a wardrobe or a suspended ceiling first.

Stretch ceiling and compartment doors. We put a “mortgage” for the built-in wardrobe

In a modern interior, it is often necessary to combine various complex elements. Particularly popular is the combined use of a built-in wardrobe and a suspended ceiling. But what are the nuances of their installation, and in what order should repairs be carried out?

Very often the question arises: what to install first, a suspended ceiling or a built-in wardrobe, or how to install a wardrobe in a room with an already stretched ceiling.

The main problem if you want to make a suspended ceiling is that it requires some indentation from the top panel of the room, that is, they take away part of the height of the room. This must be taken into account when choosing the height of the built-in elements, or rather, the wardrobe.

It is better, of course, to decide at the renovation planning stage: whether you will have a suspended ceiling, where and what kind of wardrobe will be installed, where to install the lighting.

To properly combine the cabinet and suspended ceiling, you need a “mortgage” - a beam up to 100 mm wide. It gives the structure reliability and is used in all three options for installing a suspended ceiling and a wardrobe, which will be discussed in this article.

With this installation, a wooden beam is provided between the main ceiling of the room and the compartment doors.

Elements of a stretch ceiling system

Wall molding for stretch ceiling

An aluminum wall profile or molding is necessary for attaching a stretch ceiling sheet to a wall or a vertical false panel of a sliding wardrobe. They are fixed in increments of 15-20 cm. The minimum loss in ceiling height is 3.5 cm. The gap that forms between the wall and the stretch ceiling is closed with decorative tape.

Rice. 3. Wall molding for installing a stretch ceiling

Universal and ceiling moldings for stretch ceilings

A baguette or aluminum ceiling profile is used to attach the stretch ceiling sheet to the ceiling and any horizontal surfaces. Minimum loss of ceiling height 2 cm.

The universal molding can be used both as a wall and as a ceiling molding.

Rice. 4. Ceiling molding for installing a stretch ceiling

Decorative tape or edging, plinth for stretch ceiling

Decorative tape is used to close the gap between the ceiling and the wall. An L-shaped decorative tape closes the gap between the wall and the ceiling flush, and a T-shaped decorative edging runs along the wall.

Rice. 5. T-shaped decorative edging for a stretch ceiling
Rice. 6. L-shaped decorative edging for a stretch ceiling

Options for pairing a sliding wardrobe with a suspended ceiling

Option to pair a stretch ceiling with a built-in wardrobe; there is no stretch ceiling inside the wardrobe

In this option, we will consider an example of pairing a stretch ceiling and a built-in wardrobe, with the wardrobe running along the entire wall.

Unlike the usual installation of a built-in wardrobe, when installing with a suspended ceiling, it is necessary to attach a wooden beam to the ceiling in the place of future fastening of the upper rail of the wardrobe. The level of the lower edge of the beam will correspond to the level of the future stretch ceiling.

If it is a problem to obtain timber of the required thickness, then you can twist 100 mm wide chipboard panels together in series.

Rice. 7. Embedded chipboard beam for mounting the top guide
Rice. 8. Embedded timber made from chipboard strips

The question arises, how to attach the embedment beam itself or the mortgage to the ceiling. For these purposes, you can use metal mounting angles.

Rice. 9. Metal mounting bracket
Rice. 10. The embedment beam or embedment is secured to the ceiling using metal mounting angles

There are two possible approaches to attaching a stretch ceiling, but in both cases there will be no stretch ceiling inside the wardrobe.

The first approach is to attach the top rail of the sliding wardrobe to a beam, and also attach a false chipboard panel to the beam.

The height of the false panel is based on the level of lowering of the stretch ceiling relative to the base concrete ceiling. We attach a wall molding to the false panel.

Rice. 11-12. Stretch ceiling and built-in wardrobe, fixing the baguette to the false panel

Second trip - we attach the wall molding directly to a wooden beam; after installing the stretch ceiling it will be hidden

Rice. 13-14. Stretch ceiling and built-in wardrobe, attaching a baguette to a wooden beam

At the same time, another method of attaching the baguette is possible. In this case, we use a universal or ceiling molding, which we attach to the bottom of the embedded wooden beam, in front of the guide for the compartment doors.

Rice. 15-16. Attaching a stretch ceiling to a sliding wardrobe using a universal or ceiling profile

In our opinion, in all cases of installing a sliding wardrobe and a suspended ceiling, it would be better to make not only the side false panels 100 mm wide from chipboard, but also to make a false panel on the top. As a result, you will not attach the sliding door guide directly to the wooden beam. First, we attach the false panel to the beam, and then the guide for the compartment doors to the false panel. This scheme is described in the article on making a built-in wardrobe with your own hands.

DIY built-in wardrobe

Built-in wardrobe: from the name itself it follows that the wardrobe is built in somewhere. This can be a separate niche or part of the room is fenced off, read the full article.

Decide for yourself which method to choose, the main thing is to provide for all this right away, because in these cases the depth of the future sliding wardrobe and the height of the sliding doors will depend on the location of the wooden beam.

And one more thing, if you are a fan of sliding wardrobes with lighting, then immediately plan when ordering a tension flow where the lamps will be. Unlike a cabinet sliding wardrobe, the lamps will not be in the visor of the sliding wardrobe, because there is none in the built-in sliding wardrobe, but in the suspended ceiling, in front of the sliding wardrobe doors. All this must be calculated correctly and when ordering a stretch ceiling, indicate in the design where the holes for the lamps will be cut.

Rice. 17. Stretch ceiling with lamps in front of the wardrobe doors

Option for pairing a built-in wardrobe with a suspended ceiling, suspended ceiling inside a wardrobe

If we want to make a suspended ceiling inside a wardrobe, then we also need a wooden beam. Similarly, we attach the upper false panel made of chipboard to the beam, and to it the upper guide for the sliding wardrobe doors. This option is rarely used, because the suspended ceiling inside the wardrobe can be damaged.

Rice. 18-19. Stretch ceiling inside a wardrobe

Option for pairing a sliding wardrobe with a suspended ceiling, stretch ceiling around a sliding wardrobe

You have a ready-made sliding wardrobe, and it is about 10 cm below the height to the ceiling. The wardrobe cannot be moved and prevents the installation of a suspended ceiling for the entire room.

Again, a wooden block comes to the rescue, which we fasten in front of the front and side edges of the sliding wardrobe, and then we attach the wall molding from the inside to the wooden block.

Rice. 20-21. Sliding wardrobe and suspended ceiling

Watch the video on how to bypass a wardrobe with a suspended ceiling

Video.1. How to get around a wardrobe with a suspended ceiling

Connections between a stretch ceiling and a sliding wardrobe without embedded wooden beams

The suspended ceiling is made, there is no timber and it was not planned in advance, and you wanted to make a wardrobe. In this case, a sliding wardrobe is made, the height is 2-3 mm lower than the level of the stretch ceiling.

We install the cabinet carefully so as not to tear the ceiling. Here, special accuracy is required in preliminary measurements so that the wardrobe does not support the suspended ceiling.

Rice. 22-23. Pairing of a sliding wardrobe and a suspended ceiling without an embedded beam

Read further:

  • Wardrobe design ideas
  • Decorative films in wardrobe design
  • The use of decorative films in wardrobe design
  • How to stick decorative film on glass
  • Photo printing on glass and mirrors of wardrobes
  • Sliding wardrobe in a baguette
  • Interior baguette
  • Installation of a baguette on a sliding wardrobe
  • Decorative panels Sibu
  • Structural plastics Sibu
  • Perforated and mosaic plastics Sibu
  • Shibu plastics with artificial skin
  • How to stick plastic Sibu
  • Original ideas for wardrobe design
  • Triple splash, photo wallpaper, beaded coating in wardrobe design
  • Wardrobe bottom design options
  • Design options for the side walls of the wardrobe
  • Wardrobe roof design options
  • Interior wardrobe design options
  • Design options for sliding wardrobe endings
  • Stretch ceiling and wardrobe

Built-in wardrobe and suspended/suspended ceilings

Search the site: Online designer for independent 3D modeling of a cabinet!

Even at the stage of apartment renovation, when a suspended or suspended ceiling is planned, the question often arises: how and when to build in a wardrobe, before or after installing a suspended shelf?

It is no secret that nothing can be attached to the film, and if the wardrobe is made lower than the ceiling, then the gap above the roof of the wardrobe will be filled with dust for years. And the interior space of the wardrobe will be shortened in height by several cm.

There are several options for installing a built-in wardrobe with suspended ceilings.

— The simplest one: after the renovation is completed, a suspended ceiling is installed, and the height from floor to ceiling is measured. In this case, the wardrobe should be 5-7 cm below the ceiling to allow the roof to slide in after installing the rest of the frame.

One of the disadvantages of this design is dust, which will accumulate for years in the gap between the roof and the ceiling. This gap can be closed with a chipboard panel, but this will not add aesthetics, unless you provide a classic ceiling cornice on the panel, which will be uniform along the entire perimeter of the room.

— A more practical way is to install a built-in wardrobe in the main ceiling before installing the tension flow and attaching the film to the cabinet itself.

To accurately measure the height of the opening, the floor must already be covered with laminate, tiles or parquet boards. In this design, in the front part of the cabinet (above the compartment doors), a chipboard box is provided, to which the upper guide for the compartment doors is attached from below. Sometimes a wooden beam is mounted in this box for rigidity.

It turns out that there is some additional 7-10 cm of chipboard from the ceiling to the upper door guide. The suspended ceiling is attached to this addition.

First, you need to find out from stretch ceiling specialists what height the top extension of the wardrobe should be and pass this information on to the cabinet measurer.

This type of construction has at least 2 advantages: there are no gaps or cracks above the cabinet roof and the entire internal filling of the cabinet up to the main ceiling is used.

— Another option for attaching a sliding wardrobe to an already installed stretch ceiling is to, before installing the ceiling, provide a wooden beam along the installation line of the sliding doors for the entire gap from the main ceiling to the film.

The sliding wardrobe guide will be attached to this beam through the film. Some customers are afraid that by drilling the film, the tension hole may increase over time. The fears are in vain, since the same screws are used to tighten the guide or upper false panel of the cabinet to the beam, which will tightly press the film to the beam.

For suspended ceilings, the above options are also suitable: either the cabinet is made below the suspended ceiling by 5-7 cm to raise the roof, or the suspended ceiling is installed after installing a sliding wardrobe with an upper extension of the required height. It is also possible to attach the top guide of the compartment doors to the metal frame of the suspended ceiling.

Examples of installing a sliding wardrobe with a suspended ceiling:

How to connect a suspended ceiling and a built-in wardrobe

STRETCH CEILINGS SPB Details NEVA CEILING Views: 1946

Stretch ceilings have long ceased to be considered a novelty. To order, call Tel.+7. Many people choose this option when renovating. But sometimes difficulties arise if it is planned in advance that the interior will have a built-in wardrobe. How to connect a suspended ceiling to it in this case. What to do first: mount and install a wardrobe or stretch the ceiling?

Options for joining a suspended ceiling and a cabinet

This option is available for full-wall cabinets. Before installing both the ceiling and the cabinet, you need to think through everything down to the smallest detail, so that there is no annoyance later for making the wrong choice and having to redo it. It is important to take into account everything: what the suspended ceiling will be like, with its parameters, lamps, locations and dimensions. It is important that the lamps do not end up directly above the cabinet where the door track, etc. will be attached.

To resolve the issue of installation primacy, it is necessary to analyze docking options. Because the ceiling kit includes: canvas, decorative edging and a wall molding for attaching the canvas. But the baguette can be either wall-mounted, ceiling-mounted or universally mounted. To close the gap between the ceiling and the wall, a decorative tape (L- or T-shaped) is provided.

Option 1. There is no ceiling inside the closet

In this case, a wooden beam is fixed to the ceiling at the location where the future cabinet guide will be installed. The thickness of the beam must exactly correspond to the lower boundary of the future ceiling. For this purpose, you can use direct suspensions from suspended ceiling structures. In this option, we attach a false panel to the fixed beam on the side, and cabinet guides from below. We mount a wall profile-ceiling molding to the false panel. You can also attach the wall molding directly to the beam, if after installing the ceiling the beam will be completely hidden. You can also use a ceiling molding to attach it to the beam, but it should be fastened close to the guide for the wardrobe door. The mounting option should be planned in advance, since the depth of the future cabinet and the height of its doors depend on the location of the beam.

The installation location of the lamps also needs to be planned in advance to determine whether they will illuminate the contents of the cabinet or whether this is not necessary.

Option 2. Ceiling inside the closet

In this case, it is also necessary to secure a wooden beam to the ceiling at the place where the cabinet door guides are attached. The ceiling is stretched, and only then guide false panels with door guides are fixed to the beam through the ceiling sheet. This method is rarely used due to the high probability of damage to the ceiling fabric when assembling the cabinet.

Option 3. Ceiling around the closet

This is an option for those who already have a ready-made wardrobe installed and cannot move it during renovation. It interferes with the installation of the ceiling. In this case, the same wooden beam is attached around the cabinet along the edges of its upper part. The ceiling wall molding is attached from the inside to this block.

Option 4. Pairing without the use of an embedded wooden block

In this case, the ceiling is first installed and only then the manufacture of a cabinet is ordered. The height of the cabinet should be a couple of millimeters below the ceiling. When assembling and installing the cabinet, you should be extremely careful not to damage the fabric of the mounted ceiling. In this option, the main thing is to avoid mistakes in measurements and act with extreme caution.

How we are working:

How to properly combine a suspended ceiling and a built-in wardrobe?

You can combine the ceiling covering with the body based on the device or method of furniture assembly:

  1. The built-in one is mounted in a niche, delimiting the area of ​​the room. The mount is stationary, the installation is permanent - it will not be possible to move the furniture to another place. Since the coupe is assembled according to exact dimensions, the height is selected according to the level of the tension membrane.
  2. Modular models are manufactured according to standard factory dimensions. The structure can be rearranged without disturbing the interior. Due to the fixed height, it is difficult to fit the body closely to the suspended ceiling.

When the ceiling membrane is already stretched, there is a risk of damaging the film when installing dismountable furniture. Therefore, it is necessary to foresee in advance how to install it close to the ceiling.


It is best to combine stretch film with furniture

The situation is not insoluble. Both compartment furniture and the tension structure can be combined in one room without any problems. This is achieved in three ways:

  • the first method is to install the covering and then adjust the furniture to the height of the covering;
  • the second method is to remodel the furniture and subsequently install a film covering;
  • the third is creating a composition when both the furniture and the ceiling complement each other.

For the first option, the following algorithm applies: first, the ceiling covering is installed, and then the furniture is ordered. The advantage of this scenario is the relative cheapness of the project, since both the film and the coupe are ordered with the smallest deviations from standard sizes and do not require adjustment to each other. The mounting rail is installed around the perimeter and does not require additional manipulations, even if the room has a complex configuration, this is not a problem, because the rails are attached strictly according to the size of the walls.

An example of a compartment with a tension system.
There are also disadvantages. Sooner or later you will have to admit that the design will not look like the advertising photo. It is difficult to clean; over time, stains appear on the ceiling from touching.

READ MORE: Seamless wallpaper - what is it

The option of working with finished furniture, when you first need to disassemble it and then assemble it, but of a smaller size taking into account the height of the ceiling, raises even more questions. Here it is necessary not only to correctly disassemble the structure, but also to subsequently make its height smaller. You will have to be smart with mirrors and doors. This is where the big problems start:

  • unaesthetic or incorrect cut of the material;
  • errors in re-installation;
  • replacement of mirror elements;
  • replacement of the sliding system and internal mechanisms.

The most acceptable and most correct option is the simultaneous installation of a built-in compartment and a suspended ceiling structure. The essence of this solution is simple and reliable - the cabinet itself acts as one of the sides for attaching the mounting rail.

Installed ceiling with finished cabinet

Initially, the installation level of the stretch ceiling is determined. The coupe is ordered taking into account the fact that a rail will be attached to its lid or a specially applied additional strip. Since the rail is made of aluminum alloy, there are no particular problems in giving it the necessary bend. Considering that many walls have a shaped cover with built-in lamps, this decision is entirely justified, because as a result the ceiling covering will have an additional light source. Now you know what is installed first and under what circumstances.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
Для любых предложений по сайту: [email protected]