DIY tree from tree branches: ideas, diagram, instructions

The whimsical outlines of the branches involuntarily attract attention, and you want to capture this subtle beauty not only in memory or in photographs, but also in real life. If desired, you can add an unusual decorative touch to the interior by creating interesting compositions or creative products with utilitarian features. Crafts from tree branches are a great hobby that allows you to create beautiful decorative elements with your own hands without investing any financial costs. The interior of a house, decorated with this natural material, acquires a special sophistication, where everything is aimed at emphasizing its individuality. Before starting work, the blank for the future craft should be carefully prepared, taking into account the individual characteristics of the wood.

DIY crafts from hemp

If you have an area with the root system of a tree and its low above-ground part, do not uproot this element. To make crafts from hemp for your summer cottage, you will need:

stumps or one;
colored wood chips;
antiseptic;
stones;
flowers;
the soil;
brush.

To make a stump craft last as long as possible, remove the rot from inside. Dry this inner hole. Remove the bark from the stump.
Paint this natural wood element inside and out with two coats of antiseptic. When it is completely dry, you can start decorating the flower girl.
Pour fertile soil inside the stump and plant low-growing flowers. Mulch the surface with regular or colored wood chips. Place stones next to the stump.

Instead of stones, you can use upside down glass or plastic bottles. The necks of the latter are cut off.

If you don’t know how to decorate the northern part of the territory at your dacha, then place the rutarium here and plant shade-tolerant flowers in it.

Not only hemp, but also all kinds of driftwood are suitable for the device.

If you have had an unnecessary log lying around for a long time, saw through the top, remove some of the wood, and remove the bark. Also treat the surfaces with an antiseptic, then add fertile soil and plant unpretentious plants.

Take a closer look, maybe the snag found in the forest resembles someone? In the photo she looks like a fairy-tale dragon, you just need to work out the details so that they become obvious. To do this, use a hatchet, hacksaw, and wood carving tools.

Crafts made from driftwood can be not only in the form of flower girls, check out the following ideas.

Top 13 DIY stump products - only the best ideas

Unnecessary tree stumps are an excellent material for creativity and earning money. And imagination, as you know, has no limits or boundaries. With certain treatment, objects made from a stump will last a very long time. We have prepared a selection of the top 13 DIY stump products. Enjoy watching! These will be only the best ideas.

You can make glowing seats from a tree stump. Having painted them with luminescent paint, they are good to use in the garden.

Candlesticks made from a stump are a creative idea for the home.

If you carefully work with the tools, the stump can turn into a stand and a shelf for books: two in one.

A lamp made from a stump is an ordinary accessory made of an unusual material.

From a stump you can make a bar counter for several bottles of wine.

A coffee table made of stump and glass will fit well into the interior of the living room.

You can make a bird feeder from a small stump.

Mini - waterfall from a stump. But the stump is made from healthy dried wood, carefully treated with impregnations.

Crafts from a stump in garden design are a great idea.

A garden table made from a stump will decorate a terrace or winter garden.

Flower stands and flowerpots are made from stumps of different sizes.

The stump of an old tree will make a beautiful flower garden.

Stump figures can be placed in a garden, park, or playground.

Read in full (link)

How to make garden furniture and wooden sculptures?

Look at the results the craftsmen achieve. Having outlined some details of the silhouette, you can make such a snowman or a good-natured Leshy.

To make this type of chair, take:

driftwood;
board;
rope;
stain;
wood varnish for exterior use;
brush;
self-tapping screws;
saw.

Making master class:

To make the chair reliable and stable, choose only strong, not lightweight driftwood; oak is perfect.
Saw off the parts that will turn into legs. The two front ones are short, the back ones together with the back are long. Make a base for the seat, place a couple of boards here, and attach them with self-tapping screws.
Make armrests from durable driftwood, secure them with self-tapping screws and rope. For the backrest, take a reliable crossbar, which is fixed in the same way. Two small driftwood are attached vertically to the center of the back.
All that remains is to cover the chair with stain; when 2 layers are dry, apply three layers of varnish with intermediate drying.

If you want to emphasize the natural structure of the wood, then do not coat it with varnish, but just go over it with an antiseptic, or transparent.
Look what wonderful chairs you can make from stumps. The table is made from the same blank, only the tabletop is attached to the top. Here's what you can make from a large stump by sawing off its top part. Then the thick, intricate driftwood will turn into table legs. A bench made of wood will also turn out to be unusually interesting, delicate and even fabulous. To do this, take:

two strong boards, preferably floorboards;
driftwood;
self-tapping screws;
wood glue;
antiseptic;

Make the base for the bench.
It consists of two front and 2 rear legs. Place crossbars on them to connect these elements. Attach boards on top that will become a seat. To securely connect them to the legs, attach driftwood here using self-tapping screws. Additionally, they can be fixed using pins by cutting holes of the same diameter at the two connecting elements into which glue is poured.

In the same way, fix the back, consisting of many driftwood. Sand some elements if your design idea requires it.

You can create a massive sofa using almost the same type. But its legs and base are logs. You can leave the product as is or paint it with varnish, it also turns out very beautiful and unusual. Not only individual items, but also a whole set will come out of the old tree. Covered with antiseptic and varnish, it will be able to stand outdoors in the air. It’s so nice to sit on such country furniture in the shade, eat here, and organize holidays. If you use golden varnish in a spray can to decorate furniture made from driftwood, you will create, for example, a chic bench that will look like an antique one with a copper tint. If you only have an old stump, remove the bark from it, take out the rot, prepare it as described above, put tempered glass on top, you will have a wonderful wooden table. He may come out different. If you have a longitudinal cut of wood, process it, attach the legs from below, and place glass on top. Instead, you can make a tabletop from.

Step-by-step instructions for making a hanger

This craft can be hung in a bathhouse or a hunting lodge; in an apartment it looks very exotic and not everyone likes it. This craft is not for everyone; you can never have extra hangers. To make it you will need a fairly long piece of driftwood with a small number of roots. Additionally, you need to prepare several twisted branches. The material is needed without bark; it must first be cleaned of dirt and washed thoroughly. There is no specific design for the hanger yet; decisions will be made as the craft is completed.

Long driftwood with few roots

Step 1. Using long self-tapping screws, screw a branch with small branches to the snag; they will act as hooks. Choose the most stable position; the horizontal branch should have at least the spirit of hard stops at the maximum distance from each other. Due to this, the tipping shoulder is reduced, the hanger is more reliable and stable.

You need to connect a snag and a branch to create a stable structure

Step 2. In branches of small diameter, drill holes for self-tapping screws, otherwise the tree will crack. Driftwood does not have an even wood structure, the roots always have ornateness, the fibers are twisted, and there are other natural developmental defects. Such a tree cannot withstand internal stresses; all measures must be taken to prevent their formation.

Step 3. Prepare a small piece of board, first sand it and cover it with several layers of varnish. This board will be used to make a horizontal shelf. Place the hanger on the table in approximately the position it will occupy on the wall. Think about how best to secure the shelf. Try a few options, don't screw anything in just yet.

You need to attach a board to the driftwood

Prices for cordless drill/driver

You need to achieve a situation where two conditions are met simultaneously.

The shelf must be securely fastened. Determine at least three branches for support; their diameter should allow the existing screws to be screwed in.
Things are stored on the shelf, and for this it must be in a horizontal position. See how to fix it correctly. If there are problems, then change the angle of the entire hanger so that the shelf takes the correct position.

Practical advice. The craft looks better the less visible any connections are. Never plan or saw anything; screw screws in inconspicuous places.

If you cannot hide some connections naturally, then recess them into the wood and seal the holes with special putty. But this is an extreme option; experienced craftsmen will always see where the putty is applied.

Step 4. Carefully inspect the craft, check the strength of the structure. If any loosening is detected, secure the connections additionally. You can use branches not only to increase strength, but also as additional elements for placing clothes.

It is advisable to check the strength of the structure immediately

Video - Driftwood hanger

From large driftwood you can make garden benches, tables and chairs, etc. With minimal wood carving skills, outlandish fairy-tale animals, forest dwellers and wizards can be made. The main advantage of such crafts is that there are no two identical products in the world.

Driftwood tables

One leg table

Crafts made from driftwood can become a real highlight of the interior; trees that have outlived their useful life get a second chance and delight people for a long period of time. Crafts made from driftwood look great against the backdrop of modern furniture styles, but it’s even better to use them as a special seating area. Try to make an original composition with your own hands and place crafts made from branches next to crafts made from driftwood . You can read how to make them on the pages of our website.

Rutarium made from driftwood: master class

We continue the topic of how a rutary is created. To make the crafts come out beautiful, you first need to prepare the driftwood. For this you will need:

soda ash;
laundry bleach;
iron brush;
Plastic container;
sandpaper.

DIY creation:

Pour hot water into the container, if it has a volume of 10 liters, then add two glasses of soda ash and stir. Place driftwood here. To prevent them from floating, place weights on top. These can be plastic cans filled with water.
After two days the wood will soften, then clean the surface with a wire brush. Since the wood will be of uneven color at this stage, wash the workpieces. Pour 10 liters of water into the same 10-liter plastic bowl and add one and a half cups of bleach. Place the driftwood here for two days.
After this time, place them in the sun for 3 days. Then, using sandpaper, you need to sand the uneven areas.

Now you need to fold these blanks so that, if desired, you can use them for crafts, for example, make such a voluminous star. For it you will need:

plywood sheet;
jigsaw;
driftwood;
hot glue;
star template.

Attach the template to the plywood.
Circle it and cut it out using a jigsaw. After filing pieces of driftwood to the desired length, glue them to the star, starting from its outer edge. Then, gradually move towards the center, try to cover all the plywood with lumps. Wait until the glue cools down and cover your work with spray paint of the desired color. The silver star looks great. The door of a country house is perfect for such a craft made from driftwood. Attach the finished work here so that the star decorates the building. You can make another rutary. Look what a wonderful wooden shelf you can make.

For it you will need:

strong driftwood;
rosewood varnish;
iron brush;
construction hooks;
corners;
brush.

Use a wire brush to clean the surface of the driftwood.
Apply varnish in 2 layers. If you want, you can cover the hooks and corners with gold paint, when it dries, use these elements.

Screw on construction hooks to hang mugs or wine glasses on. Attach the driftwood shelf to the wall using metal corners. Driftwood makes wonderful things not only for the street, but for the home. Watch the following master class, from which you will learn how to make a flower stand with your own hands. For this creativity you will need:

small log;
snag;
shells;
leg-split;
river pebbles;
hot glue;
self-tapping screws;
saw.

First you need to prepare the wooden parts.
To do this, remove the bark from a wooden log. This must be done extremely carefully so as not to injure your hands. Saw circles about 5 cm thick from the log. You also need to remove the bark from the driftwood. If this workpiece is not of the correct type, then bleach it in the same way as described earlier. While the driftwood dries, you will have time to decorate the flower stand. Glue the rope onto the side surface in a circle at the top and bottom using a hot gun. Using it, attach pebbles and shells. Paint the surface with varnish in 2 layers. In the same way, decorate other pallets where the plants will stand, including the largest one, which will become the basis for the flower girl. Attach a piece of driftwood to it, and attach circles to the tops on which the flowerpots will stand.

Also paint the driftwood with varnish in 2 layers and let it dry. You can decorate the flower stand with artificial greenery. In some places, glue shells with hot glue, you will get a very beautiful picturesque stand.

Step-by-step instructions for making bonsai

Step 1. Find a small piece of driftwood that looks like an old tree. It should have a prominent thick trunk and crown branches on the sides. Do not pay attention to small branches; they can be cut off later.

Step 2. Clean it from dirt, wash and dry it. First, use pruning shears to cut off all the excess and form a crown, work carefully, you won’t be able to glue anything back.

You need to cut off excess branches from the driftwood

Practical advice. Washing driftwood is much easier and faster with an old toothbrush. Its fibers remove dirt from even the smallest holes and bends.

Step 3. Stir the alabaster. The quantity depends on the container in which you plan to fix the driftwood. Alabaster will hold it and imitate the earth.

The larger the snag, the larger and heavier the base should be to ensure the stability of the structure. In our case, approximately 0.7–0.9 liters of finished mass is sufficient.

Remember that alabaster hardens very quickly, first prepare a container for the composition, then you won’t have time to look for it.

The driftwood is fixed with alabaster

Step 4. Hold the driftwood upright with one hand and level the alabaster with the other. If dirty stains of the mass appear on the surface of the driftwood, they must be immediately and thoroughly removed with a slightly damp cloth. After drying, white alabaster is deeply absorbed into the wood, making it almost impossible to clean the surface.

Use a cloth to immediately remove spills and drops.

Wait a little until the solution begins to set; the driftwood should hold on its own. Leave the solution alone until it sets completely, this will take about 10-20 minutes.

Step 5. Prepare special artificial pine or spruce branches, they are then cut into small branches and inserted into the driftwood. To make holes you need to have an awl or a hand drill. The surface of the wood is impregnated with stain; it emphasizes the structure. Prepare small pebbles and a glue gun. It is better to use modern hot one, it is easy to work with, and the adhesion indicators are quite sufficient for our craft. To improve the designer look, a final varnish coating is applied. All these materials must be prepared in advance.

DIY rutary in the city

If you don’t have a garden plot, you live in a city, trees have been cut down here, and what’s left are interesting snags and stumps, then you can decorate your yard using this idea. To implement this idea you will need:

stumps and snags;
dye;
tassels;
seedling;
fertile soil.

If it is difficult to remove the middle of tree cuts, then just paint them; for others, remove this middle part, fill it with earth, and also paint these blanks so that they look more positive.
In this case, you can use not only white color, but also any others. Make a kind of well from the branches of cut trees, placing four in a row. Also add soil here and plant flower seedlings. If there is little sun in the yard, then use shade-tolerant plants, such as hostas, vines, ivy.

If you have a lot of driftwood, you can make interesting sculptural compositions out of them. For example, these horses. If you know how to carve wood, then try making a rutary with a sculpture of a funny person.

Crafts from driftwood - use cut branches, fallen trunks and old stumps to decorate the garden

The end of autumn is the time to clean up the area. And time, which, like no other, awakens inside a zealous owner, ready to save every nail. If during the seasonal clearing or development of a new plot you have sawed-off trunks, branches, thick stumps and other woody “garbage”, do not rush to throw them into the autumn fire. Find a more interesting use for them - decorative and completely functional.

MORE PHOTOS FROM REAL PROJECTS…

► In the “photo” section on Houzz, 7,000+ photos from Russian gardens and local areas have been uploaded

If you want to keep the driftwood in its original form, a protective coating is necessary. Before this stage, the driftwood must be thoroughly dried, so you will not be able to install such a sculpture this season. Professional wood drying is a responsible and lengthy task. In a simplified version, you need to keep the raw materials in a confined space while maintaining stable humidity. The main task is to make drying gradual and uniform. And after this, additional processing can be carried out.

Natural driftwood is a wonderful decorative element in itself. Its flexible curves and complex shape are the optimal complement for natural landscapes, which are now at the peak of fashion. And the use of natural elements, which acquire a second life here, is exactly in the spirit of trends. An excellent place for large driftwood would be a flower garden, rock garden or the shore of a pond.

Unlike most living inhabitants of flower beds, fancy products made from roots and driftwood will decorate the area in winter.

Direct associations with a virgin meadow are not the only decorative move. In a modern, laconic space, driftwood will be a spectacular accent that works in contrast with the surrounding geometry. Place it as a sculpture - against a fence or wall, one complex shape or a whole row.

2. Driftwood - the basis for complex sculptural forms

If natural forms excite a passion for creativity, and the natural look is not enough for you, use stumps and driftwood as raw materials. With some imagination and a little effort, you can make a wide variety of sculptural forms from them. Crafts for the garden made from driftwood will preserve the beauty and warmth of natural material in a man-made form. The technique depends on your idea, as well as the size and shape of the original fragments.

The massive trunk available can be decorated with carvings, turning it into a realistic or fantastic figure. Or to a whole fairy-tale city, as in this photo. This method is also good for old dead trees that are difficult to uproot and completely remove from the site. By creatively reworking such a protruding trunk, you will turn it from a “stumbling block” into an art object.

DIY wooden figures

They can also be made to decorate a yard in the city or country house. Such a rutarium looks great, adds individuality to the site, it is clear that a jack of all trades lives here.

If you want to know which wood is best to carve a sculpture from, then check out the following information.

Linden is one of the best materials. This wood cuts softly and easily. The structure of this tree is light, it almost does not warp or crack.
Aspen is also easy to process. Products made from it don’t even need to be varnished, then after time they will have a beautiful silver color. But crafts made from such wood are prone to chipping, so it is used to create large sculptures.
Alder lends itself well to carving and processing, and is resistant to cracks. Therefore it is also an excellent material. Take this into account when you do rutaria on the site.
If you want to make elements of fine art here, use walnut, it is very decorative, does not warp and is resistant to chips.
Birch is not processed so well and warps. Therefore, if you want to carve wood, use this to create small parts and souvenirs. But birch is well painted and has a beautiful relief.
Large carvings can be made from oak and will be durable. But such dense wood is difficult to cut, so you will have to make an effort or use an electric tool.

Once you have decided on the material, look at what wood carving tools to use.

Large ones include an axe, a hacksaw and even a chainsaw.
Using cutters with a blade width of 1.5 cm, you can cut out small elements that are in hard-to-reach places. There are many cutters, each designed to perform a specific function.
The adze is suitable for initial processing of small parts.
Knives, jambs and chisels are also used for wood carving. The latter perform any notching and are intended for working out details. The cutting edge can be of various shapes.
The Bogorodsky knife is perfect for carving sculptures from wood. It is named after the village where such work has long been carried out.
A drill is suitable for drilling holes.
To make the surface of the product smoother, use a rasp, a grinding machine and sandpaper.

The photo shows how wood carving is done. You can see the stages of creating a sculpture from this material using the example of carving a bear. This is preceded by the following work:

creating a sketch on paper, it needs to be drawn from different angles;
then this sketch is transferred to a workpiece, for which it is best to use a rectangular block;
if you want to avoid mistakes when cutting a sculpture from wood, then first mold it from plasticine or clay and make adjustments;
Now you can move on to rough cutting, which is carried out using a hatchet or saw;
you will create small details using an adze;
and a cutter and chisel will allow you to cut off excess corners.

As in the photo, to make a bear, take a log.
Using a hatchet, chop off its top part, but not all the way. At the next level, this workpiece area should become a little smaller. Next, the details of the nose and sternum of the bear are worked out. Then he will acquire ears, front paws and hind paws. At the next stage, they are designated more clearly, and a stand for the wooden sculpture also appears.

For the next step, you need to use chisels, a Bogorodsk knife, shoals that will help make the facial features, bear claws, and fur more realistic.

At the final stages, you will need to sand and polish the wooden sculpture, then cover it with stain and varnish. You can use special wax.

If you want to see how a bear is carved from wood with a chainsaw, then refer to the next master class.

If you want to know what a rutarium at your dacha could be like, then turn on the following video material.

Another one will clearly show how you can decorate your yard using cut down trees.

A dacha is a place where everyone can work hard and, of course, relax and unwind. To beautifully build a place to relax, you need a little imagination. In this article you will read and learn how to make original crafts from tree stumps for your dacha, and what materials you will need for this.

In this way, you can embellish your landscape without spending a lot of money on it, in some cases you will even spend only energy and time.

This way you will get a wonderful decoration for your garden.

What can be made from stumps?

A person has a lot of different ideas, and sometimes you wonder how you yourself were able to come up with and build this or that thing. Almost anything can be used, even very old things. This is exactly what happens with old stumps that are thrown away or burned. But you can also try to create something out of them. You will think about what can be done, and we will answer with very beautiful crafts, easy!

First of all, an old tree stump can perfectly become furniture,

It’s so needed in the garden or at the dacha. You can make a chair from a small hemp for children; if you have a large one, then for an adult.

If the height of the stump allows, then you can cut out the back (using a chainsaw), and if it is wide, then the armrests will be an excellent support!

If the stumps are very small, this is a good decoration for the playground.

It is enough to sand the top of the stump and apply bright paints.

If the chairs are made, then a table is very appropriate here.

In such an atmosphere it is pleasant to relax and drink tea in the shade of a spreading apple tree. In this case, the stump can serve as a support for the tabletop, and if it is large, then as a table. Then we level the surface of the stump and apply special impregnations, preventing it from rotting. On the sides of this stump, two planks should be nailed parallel to each other and two more perpendicular to them. After which you can build a tabletop of any shape. This is one of the most common options. For the durability of your table, you need to varnish it.

Well, you can create other crafts for the garden

using
them as garden sculptures.
For example, a bright fly agaric can decorate your green meadow. The stem of the mushroom will be a stump, but the cap can be made using a basin or bowl, covering it with spray paint. After it dries, add white spots. You can also decorate the leg, draw a face, and get a beautiful living fungus. You can do the same with other mushrooms of your choice.

With a little imagination, you can create an original statue for your garden.

A stump can serve as an excellent support for a sculpture, a flower garden, or just a barrel of water.

You can also create wonderful containers for planting plants!

To do this, we simply cut out the inside of the stump and fill it with drainage, fertile soil and the plants themselves. A young flower will work well here, for which you only need 4 cm of soil.

You can also use a large stump and place a flowerpot with flowers there. And if you cut it to a depth of 25 - 30 cm, you will get a real flower bed. For such a flower garden, we also fill in a drainage layer of 5–10 cm and 20 cm of fertile soil. And we plant plants.

Climbing plants (petunia, decorative strawberries, etc.) will fit into such a flower bed. This will go very well with landscape compositions.

Using driftwood in the country

Crafts made from driftwood and stumps look very beautiful and will perfectly complement the composition. Almost everyone in the country has a large broken branch or a fallen tree. This can serve as an excellent stand, for example, to support a washbasin in the country.

From a large branched branch you can make a wonderful composition that makes up your landscape. To do this, you need to thoroughly clean the snag, treat it with a protective compound and fix it in the ground, concreted or dug to a certain depth.

If the garden interior has an alpine slide,

then it can be perfectly complemented by a piece of driftwood covered with moss. It will turn out very beautiful if you additionally plant it with plants.

There can also be many natural depressions in the snags, which can simply be filled with soil and sedums, sedums and others planted there. It will turn out very beautiful.

If you have a V-shaped branch on hand, it will work perfectly as a coat hook. You need to secure one end of the rope to a branch and the other to the wall.

A bench is perhaps the most common option. A snag of this type will create a beautiful and unusual look. It is necessary to choose only strong branches that can support the weight of a person.

You can make excellent candlesticks by cutting wood into several cylinders and making small indentations in it. You just have to be careful, it can easily burn.

Of course, don’t forget that wood is quite fragile.

It can rot, become exposed to moisture and deteriorate over time. And even more so for snags with stumps, since these are already old trees.

To prevent this, you must first treat everything with special chemicals and varnishes, making the craft for a long time. Well, if you are more satisfied with the mossy effect, there is no need to process them.

Autumn is an interesting time of year. First, the tree crowns turn yellow and red, and then the leaves fall, causing despondency. It is during this period that you need to diversify your life with something interesting and original. We will talk about crafts made from driftwood. It turns out that twigs that are unnecessary at first glance can be very useful to you in the interior or on. Let's look at 5 master classes related to making beauty with your own hands.

DIY stump table: 10 stunning photos

A table is an important attribute of any home. The most important action takes place at the table - the meal. Scientists advise using wooden tables - they do not emit toxins like plastic ones. Glass tables are more dangerous and can be fragile. Good wooden tables cost a lot of money, and many people decide to make a table with their own hands. The cheapest and easiest way is to make a table from hemp.

It looks very beautiful and beautiful, but this is an ordinary stump.

They simply nailed the tabletop to the stump, and it turned out to be a good table.

This type of work will require significant time and carpentry experience, but it will be worth it.

A table can be made from small stumps and varnished.

It's not particularly easy to find such a large stump, but the coffee table turned out great.

To create such a small table, we took a small stump and an ordinary round timber from a tree.

You can also put a glass top on top, which will add even more attractiveness to your table.

You can also screw wheels to the stumps and the table will be movable.

A table with lighting can also be made from hemp.

The coffee table in the shape of a month is a beautiful piece of work.

Read in full (link)

They say that sitting on a stump is even beneficial. Previously, hemp was often used as a chair and people didn’t bother too much, even now many people do this in villages. But you can make a beautiful chair from a stump for your apartment or house with your own hands; all you need is properly growing hands and imagination. In this article you can consider the best works.

Very simple and soft - soft stump.

You can turn an original chair using a chainsaw and a turbine.

And here is a stump chair with legs.

You can also make the back in hemp if you wish.

Beautiful stool made of dark wood.

Screw on the wheels and you have an office chair made from a stump.

Almost any stumps can be used.

From small stumps you can glue together a table and a stool like this.

Hemp chairs for the whole family.

And in these ones they even made a real thing.

The royal stumps look beautiful.

You can cut the stump into pieces and make a stool.

Read in full (link)

How to prepare branches for crafts?

From ordinary unremarkable driftwood you can make original wood, which will subsequently be used for homemade gizmos.

Many craftswomen wonder about the intricacies of preparing this material. The process is simple if you follow a certain procedure. For preparatory activities you will need the following items (they are found in almost every home):

Plastic container.
Soda ash.
Sandpaper.
Linen bleach.

Preparing branches

What to make from birch bark - ideas and photos of crafts

You can make amazing paintings from this material.

After you have removed a thin layer of birch bark from the bark, dry it, then you will need to cut these elements. You can lay templates on the bark, trace on them and cut out elements for flowers and leaves. Glue black paper onto cardboard or plywood. Start using glue to attach the leaves here.

Glue the flowers together from several petals in advance, attach them in the middle. Also glue a wooden stick here and wrap it with white electrical tape or paper. From these elements you will make stems. Glue the branches. Cut the birch bark into thin strips, twist them tightly in a spiral, you will get decorative elements that you will also attach to the picture. All that remains is to decorate it with a frame and can be placed in the most visible place.

If you don't know how to prepare bark for such work, then check this out. In the forest, you need to collect birch bark from the trunks of birches that have been in dead wood for a long time. Look at the following photo, which shows how to cut the bark into strips and roll it into a ball. This birch bark is suitable for weaving shoes, baskets, and belts.

You can also get birch bark from fallen large birch trees. In this case, panels and paintings are made from it. Then you need to take a strip at least 80 cm wide, see from which part of the tree you need to collect it.

Before you make a craft from birch bark, you need to prepare it. First, the collected bark is boiled, then you cool it, straighten it and try to divide it into thin plates. Then you need to place the materials collected in envelopes by color under the press. But already dry plates are placed here. Keep them in this form in a horizontal position so that they are straightened. And you can apply them. For example, to make such a wonderful piece of work.

To do this, take a prepared piece of bark. It's good if it's not very thin. But too thick won't work either. Then give the child some paint and let him start creating. You can first transfer the drawing here with a gel pen and start coloring. After which the picture is framed. For this purpose, wooden sticks are suitable, which are glued at the corners, and a rope is attached to the top.

You can also make wonderful flowers from birch bark. To do this, some petals are pre-colored. You can boil them in a solution of onion peels so that they acquire this reddish tint, then they are attached to wooden sticks, which will become stems.

They can be painted white or wrapped with such electrical tape, or glued strips of birch bark.

The following master class with step-by-step photos will help you understand what else can be made from bark. The step-by-step instructions are very accessible and understandable, so even beginners can master this craft.

Using branches for furniture

Large driftwood is ideal for and. Medium-sized raw materials will be the best option for making shelves. And small driftwood will come in handy for individual details. When making furniture structures, it is important to consider some points.

The driftwood must be strong, since they will have to take on a colossal load, especially when it comes to pieces of furniture of impressive size.
Raw materials are prepared for work in accordance with the information indicated above. They need to be bleached and sanded.
Next, the tools are prepared. You will need a drill, nails for knocking down driftwood, if the furniture design allows for this. Other equipment necessary for the project is also being prepared.
After the production process, driftwood should be treated again with compounds that prevent rotting and pests. Leave it for a couple of days, and then put the piece of furniture into operation.

Since there are a huge variety of furniture designs made from driftwood, it is worth using tips on making specific types of furniture.

How to mulch the soil with bark?

This is another way that will show what can be made from bark. This material comes in large, small and medium fractions. You can use the one that suits you.

But they say that such pine bark is an excellent fungicide and will protect plants from pests. She also:

will protect the trunk circle of trees from freezing;
will not allow weeds to grow;
will allow moisture to pass through well and retain it;
will decorate this place of the site;
in warm weather it will save the earth from overheating;
durable, such mulch can be used for 6 years;
decomposing, forms useful compounds;
a strong wind will not blow it to the sides;
protects against soil crust.

A few more recommendations:

It is best to apply mulch in the fall or spring. If you do this in the spring, wait until the ground has completely thawed and warmed up. First, the soil needs to be well fertilized, then spread the bark in a 6 cm layer.
If you want to mulch your garden beds, then plant first. When the shoots appear, you can mulch the gaps between them with fine bark.
When laying mulch under trees, avoid contact with tree trunks to avoid causing trunk rot.
Do not place the bark on dry ground; it should be placed on moist soil. And also do not use fresh bark, as it contains a lot of resin, which is harmful for plantings. First you need to dry the bark well, then use it.

Here are some bark crafts we recommend making, and how to use this natural material. Watch how experienced gardeners mulch the soil.

Here are some bark crafts you can try. An accelerated video will help you quickly create a beautiful composition based on this material.

Lighting

It turns out you can make a chic one out of driftwood! Of course, there are many design options, but we will consider the process and algorithm using the example of a classic product. Whatever we say about its standard nature, it will look unusual, but its appearance will allow it to fit into absolutely any interior.

Now - about the manufacturing procedure. Arm yourself with certain materials and get to work.

Take one large driftwood (up to 1 m long). It is desirable that it has an interesting shape (curly branches arranged in an original order). Choose the species at your discretion, but it is best to give preference to oak or pine needles: the production process will give you many pleasant emotions, and the result will amaze you with its unusualness.
Treat the wood according to the first master class, and then make holes in it along the entire length of the base and individual branches at a distance of 10 cm from each other in order to insert decorations into them. These can be metal fittings, decorative stones, ribbon bows.
Prepare the basis for. It can be a purchased part in the form of a regular stand. Then you need to connect the stand and the driftwood in a convenient way. To do this you will have to acquire carpentry skills; it will be difficult for a beginner. The thickest part of the driftwood should be located closer to, and the thinnest part will act as the top.
A decorative braid or rope 20-30 cm long is suspended from the top of the structure. On the other side of this thick thread there will be an electrical mechanism, that is, a system for turning the lamp on and off.
To prevent the light bulb from being “naked”, provide a lampshade for it. This step is a matter of your imagination. You can make it yourself or buy a ready-made version.

Manufacturing

As in any business, to begin with it makes sense to practice on simple products: small sculptures, lampshades, photo frames, mirror framing. Once the skill has been mastered, you can begin creating more impressive furniture with your own hands.

Preparatory stage

First, the layout of the product is well thought out in order to clearly understand what the output should be. It will take not only precise calculation, but also imagination to connect disparate fragments by texture or pattern. For example, the backs of chairs, armrests, footboards or headboards of a bed, legs made of curved branches will look more interesting than straight ones.

Original panels made of driftwood

If you want to get involved in the process of such needlework, help you. They are hung on the wall and used as paintings or stands for candles and souvenirs.

In our case, we will consider a master class on making panels.

Prepare a rectangular piece of driftwood (this can be a log) 30 cm long and 10 cm wide. Process it in accordance with the first master class. This will be the basis of the panel.
Another element is attached across the base. It should have the shape of a parallelepiped and coincide in length with the width of the base. Fastening can be done with nails or good wood glue.
Next, all you have to do is process the wood and place a candle on the protruding element - your home will be transformed in the blink of an eye!

This is what the original panel looks like. If you follow the instructions given, the result will pleasantly surprise you.

How often, when walking through a forest or park, we see thick dry branches broken by the wind, snags or pieces of rhizomes. It's a shame to pass by such material. A person with imagination immediately imagines a beautiful, functional thing. Crafts made from tree branches can decorate the yard of a house or the interior of a room.

Man instinctively associates himself with nature and considers himself a part of it. Therefore, any natural material - stone, wood - brings comfort and tranquility to your home. Wood is a warm material. It absorbs moisture and creates a healthy microclimate. It’s not for nothing that in a log house you can breathe so easily and sleep well. The best bathhouse is also wooden. You can put unusual furniture made of branches in it - a bench, a hanger, stools. It smells of pine resin and birch broom. This adds vigor and strength.

What can be made from driftwood and branches? You can make pieces of furniture and decor from different parts of wood.

You can’t put furniture made from stumps in your house or on your veranda. But such an armchair or stool is well suited for a yard or summer cottage. An original solution for a table and seat made of stumps and thick branches will attract the attention of your neighbors and guests. In order to make such items, you need to have artistic taste, woodworking tools, time and patience.

The main advantage of stump furniture is the lack of materials costs. Everything can be done even without nails using a hacksaw.

Furniture made from stumps and driftwood will harmonize with the rustic style of the site. A real or decorative well made from a log house, a wattle fence made from willow twigs or a fence made from thick branches will look good.

The simplest solution is a bench made of two stumps with a thick board placed on them. You can leave it without a back, or you can equip it with a back made of sanded thick branches. It will be beautiful and unusual. This will be a combination of furniture made from branches and stumps.

Even the marks of time that inevitably appear on the tree do not spoil the appearance of garden items and look natural.

Furniture made from roots and stumps is massive and durable. From a solid tall stump you can use an ax to cut out a chair or a chair with a backrest. The root can be planted on the armrest of such a product.

The most difficult thing is to deliver the forest material to the site and load massive logs or stumps onto the truck.

Stumps are used to make stable stools. They are also sanded and varnished. You can decorate the body of the stump with carvings. The top is colorfully decorated with colored glass or flat stones. They are glued to liquid nails or epoxy resin.

Furniture made from driftwood and thick curved branches are real fairy-tale creations. Product parts are fastened together with self-tapping screws and wood glue, depending on the configuration of the items. Furniture made from branches gives room for imagination. From this material you can build something like a small gazebo. It is good to plant wild grapes near it, which will eventually entwine the tree.

The material for a garden chair, sofa or chair is cleaned of soil and dirt, the bark and top layer of the rhizome are scraped off to light wood, and impregnated with stain and varnish.

Furniture made from branches creates the feeling of openwork weaving.

The garden plot of creative owners is inhabited by fairy-tale characters - goblins or birds - products made from driftwood, gnomes made from tree roots and other forest inhabitants. Logs turn into bears, frogs - princesses and other figures.

To make furniture from branches or furniture from stumps, the wood must be well dried so that it does not rot. To protect against bark beetles, it is treated with antiseptic compounds. DIY crafts made from branches add a romantic style to the interior. You can make an exclusive thing with your own hands.

There are many varieties of such crafts. Handmade crafts from tree branches include wall decoration, various vases, figurines, candlesticks, coasters. If you want the masterpiece you made to decorate your interior for a long time, you need to choose the right material for it.

DIY stump stool. 10 amazing ideas + photos

Designer items are made from waste scraps. From an unnecessary stump you can make: benches, tables, stools. The stump does not need to be processed with tools. This type of furniture has a special style and design. Furniture in Russian traditions will look great in a garden, a bathhouse, or a summer kitchen. We invite you to evaluate the stump stools with your own hands. 10 amazing ideas + photos.

Economical furniture: the stool is made from two cuts of one tree stump.

For this stool you will need a high stump so that you can cut down the backrest.

This model is sustainable. But you need to make an effort to cut a curly leg from a stump.

The most common model of a stump stool. But in order for the furniture to last longer, you need to properly fasten the legs.

The stump is upholstered with soft fabric. This stool is comfortable to sit on.

A stool made from a stump is a convenient and simple model: cut out the legs and the seat is ready.

Stable, low-rise stools made from a stump. True, they weigh quite a bit.

To make such stools from a stump, you will need a lot of effort and time, large stumps. And the price will be high.

This tall stump stool is perfect for a bar counter.

Read in full (link)

What is the value of furniture made from branches, driftwood and stumps?

First of all, of course, uniqueness. No one in the world has the same furniture, since natural exclusivity is used - there are no identical branches, just as there are no identical fingerprints.

Decorative candlestick made of planks

Safety. The material does not cause allergies, it does not contain toxins and other delights that factory products are full of.
Reliability, especially if roots were used. With high-quality assembly, furniture lasts for decades.
You can assemble any piece of furniture, since the material used is different (in shape and size).

Snag - an idea for a sculpture

Branched bends of roots, gnarled stems, powerful stumps - the best material for creating the image of realistic and fictional figures

For some, the curves are wings, while others recognize the silhouette of an animal in them. Do not limit your imagination, use wood in its natural beauty

Have you collected a collection of various branches and twigs? Try creating something more complex like this beautiful stallion creation. Thanks to movement, precise proportions and shapes, the sculpture seems to come to life before your eyes!

Notice the exotic image in the driftwood? Finalize the form, show its character to the maximum, making the figure noticeable to everyone

Old driftwood is an unusual and valuable material for impressive decorative items, furniture, and expressive figures. Most likely, we have not mentioned all the options for their use. Now you!

What other uses for driftwood can you imagine? Or maybe you already have a piece of art made from this original material at home?

We invite you to familiarize yourself with Pickled plums for the winter without sterilization: 5 simple and tasty recipes

The main advantage of rustic furniture is exclusivity. In nature, there are no two identical trees, trunks or twin branches, so any furniture made from branches, driftwood, or stump will also be unique. There are also advantages:

Environmental friendliness and absolute safety of the material.
Reliability: strong roots from which a table, chair or other object is made guarantee its maximum strength.
The variety of materials allows you to make any product: from an elegant lampshade to a chest of drawers or a bed with branches on the backs.

With proper use, this furniture will last forever.

And even a stump

If a stump has formed on the site, you can use it as the center of the composition, surrounding it with logs. The main thing is that the hemp furniture has an even cut - the table and chairs will be stable. If desired, they are supplemented with backrests made of branches and pillows are placed.

You can even use an old rotten stump as a flower pot. They are placed in the rotten middle only in a pot so that the wood does not completely collapse, and if there is moss and other vegetation on the stump, this is only a plus: they will add decorativeness.

The quirkiness of roots, branches or driftwood creates endless scope for implementing the most unexpected solutions. They are fabulously beautiful and at the same time look cozy, but most importantly: they exist in a single copy.

We suggest you familiarize yourself with Hawthorn, how to dry it in the dryer. How to dry hawthorn berries in an electric dryer - step-by-step instructions with photos

Furniture from roots: fabulous beauty

Furniture made from roots is interesting because it is definitely impossible to create two identical pieces. It will look good in a country house, where at least a piece of nature should be present, or on the street. Leaving the city for fresh air, you want everything to be beautiful, fabulous... All the materials from which the furniture is made should be natural. Furniture? created from ordinary tree roots? will be an ideal option!