Shell film for kitchen countertops

Silicone table pads

Types of soft glass tablecloths:

• The bulk of silicone pads are available in a colorless version.
• There are silicone tablecloths for tables with a pattern, which allows you to give the room a more original look. Any design is applied to the film on the inside, which guarantees a long service life. Most often, images of fruits, berries, flowers and intricate geometric shapes are used.

Buyers have the opportunity to purchase a matte film; it looks quite unusual on the countertop and does not interfere with the overall interior.

For the convenience of using thick film, you can attach special corner silicone pads to the corners of the table. They additionally prevent premature damage to furniture.

Coating options

As we have already found out, in order for a tabletop to serve for a long time, it must be durable, reliable, and have a heat-resistant and water-repellent surface. Industrial models made of metal and artificial stone meet these requirements. It is more difficult to protect wood or products made from chipboard, MDF. They are laminated, covered with PVC film, plastic, paints and liquid glass.

Oil and paint coatings

There are two types of such coatings: oil and wax based, using paints and varnish. At home, the worn surface is cleaned of the old finish, then sanded and a protective layer is applied again.

The countertop will be reliably protected by industrial oils: citrus, tung, linseed. Two or more layers should be applied to the surface, each of them must dry thoroughly before subsequent application. These are environmentally friendly compounds, they do not have toxic odors or fumes, are able to repel water, and protect the surface from scratches.

Self-adhesive film

This is the simplest option with which you can update an aged countertop. Before laying the film, the surface should be thoroughly cleaned with sandpaper and brought to complete smoothness.

Cover with a sticker carefully, carefully expelling air bubbles from under the film

Soft glass

Housewives try to cover tables with all kinds of tablecloths and oilcloths to preserve their appearance, but the table mats quickly wear out and become unusable. The best solution for this task is to cover the surface with a special film.

The flexible coating looks like a transparent table cover; instead of a tablecloth, there is a silicone backing. It is made from polyvinyl chloride (PVC). The lining is resistant to household chemicals, easy to care for, it is not afraid of high temperatures and scratches, and has water-repellent properties.

Liquid glass

This beautiful and reliable coating was invented at the beginning of the 19th century by Professor Johann Fuchs. Liquid glass is a transparent polymer (epoxy resin). The material does not change color, does not crack or peel. It is resistant to mechanical stress and is not afraid of hot dishes and spilled coffee. The smooth surface is easy to care for.

Glass is made from sodium and potassium silicates. Potassium polymer does not produce glare, but soda glass is more suitable for countertops.

You can also use liquid glass at home; it is diluted with simple tap water. To make the coating look truly glass, before pouring the composition, the countertop is cleaned of dirt and polished. Then the resin is applied in a spiral motion and leveled with a spatula - from the center to the sides.

Design of kitchens made of MDF covered with PVC film

One of the key design advantages of kitchen film facades made of MDF is the variety of colors and textures, with which you can create a kitchen in any style, from classic, with milled doors, as in the Veronica kitchen, to futuristic modern in gloss, as in the suite " Angelica". In addition to multi-colored matte and glossy, MDF facades can be mirrored, patterned, or patinated. The patina effect looks especially impressive on facades with a film that imitates natural wood.

On a note

If patination is used on milled MDF facades, this will visually make them more textured and embossed.

Proper care of MDF kitchens covered with PVC film

In order for a kitchen set to serve for many years without losing its aesthetic appearance, it is very important to properly care for it. Failure to follow the operating rules can ruin even the highest quality furniture. To make an MDF kitchen covered with film look like new, you need to follow simple recommendations:

• To wash film facades, do not use chlorine-containing or abrasive cleaners;
• Avoid prolonged exposure to moisture on furniture;
• Protect facades from high temperatures.

If you follow these simple rules, MDF film kitchens will delight owners with their beauty for a long time.

On a note

To care for the surface of the MDF kitchen film facade, you should use only soft sponges; scrapers and brushes are strictly prohibited!

You can buy an MDF kitchen wrapped in PVC film at. From us you can choose a ready-made set or order an individual project according to your dimensions. To preliminary calculate the cost of a kitchen, use a convenient online calculator.

Types and properties of decorative stickers for the kitchen

Stickers for kitchen units are made from vinyl self-adhesive film. This material:

Decorative stickers come in all sizes, so they can be used in a variety of ways.

The first is as a full-fledged design element, as a material for covering kitchen facades or countertops. This way you can change the interior of the room at least every year!

Another option is to decorate the kitchen in a “spot” manner. For example, paste over several kitchen drawers to create an accent in the room, or place stickers on some areas of the wall or refrigerator. Or you can glue over defects that you would like to disguise: deep scratches, ingrained traces of spilled sauce (for example, on a kitchen countertop), etc.

There are two types of stickers:

1. Film for pasting kitchen facades. This can be a single-color film or a whole pattern, divided into parts for each door. The upper and lower structures of the headset can be pasted over in different colors, styles can be arranged, or the working surface of the table can be changed.
2. Dot stickers. Suitable for walls and refrigerators. Such stickers are selected to match an existing design. In this case, stickers do not change the interior, but only complement it. They are applied a little differently than regular stickers.

From the point of view of design and installation, it is better to place stickers on plain, smooth surfaces. Most often this is done on plastic or wooden cabinets or on ceramic tiles. There they will stick more securely and evenly (and therefore last longer), and will look more appropriate. But this does not mean that they should not be glued to a textured surface. For example, such a sticker will perfectly disguise a chipped tile or a torn piece of wallpaper in a visible place. Another question is that such a sticker will last much less.

Decorative vinyl stickers are sold in construction and furniture hypermarkets and industrial goods stores. Their price depends on the quality of the material and additional parts. For example, there are embossed stickers and even glow-in-the-dark stickers.

In general, stickers for kitchen units do not create much trouble. The only difficulty you may encounter when choosing kitchen cabinet stickers is their wide range. If you are going to apply stickers to the entire kitchen cabinets, the color of the furniture will not affect your choice. But with targeted decorative application, you will have to be more careful.

So, absolutely any images will suit white or light beige furniture. But if the original kitchen has a different color, think carefully about the future design. First of all, remember: you should not mix cold and warm shades - it always looks awkward. A win-win option is to choose a pattern that is a tone darker or lighter than the surface on which the sticker will be applied.

MDF facades in PVC film

We guarantee that all products sold, including furniture facades made of durable MDF material, are distinguished by their quality and impeccable design. Modern kitchen sets allow you to recreate any interior design, from classic to modern. Furniture made from MDF film transforms beyond recognition; the rich color palette opens up truly limitless possibilities. Various price categories satisfy the requirements of all customers; our managers are always ready to assist in choosing.

Features of use

The packaging must be removed very carefully. The use of any sharp objects, especially scissors and knives, is prohibited.

In order to get the product you need:

Carefully grasp the edge of the tape. Pull it towards you. Remove the remaining film. Clean the tablecloth from dust.

Laying the material

Flexible glass is installed on a stone, metal or wooden surface as follows:

1. Place the film on the table.
2. Moving towards the edges from the center, press down. This will help avoid air bubbles.
3. Wipe the table covered with liquid glass with a damp cloth.

The film is laid on a tabletop made of glass as follows:

1. Clean the surface from dirt.
2. Place a tablecloth on the table.
3. In places where bubbles collect, spray with water from a spray bottle. Against the background of additional moisture, the tablecloth quickly sticks to the tabletop.

Trimming material

In order to cut the glass to the required dimensions, you will need the following tools:

• roulette (ruler);
• marker;
• knife (stationery).

The film is cut on a cutting board.

The instructions look like this:

1. Measure the countertop.
2. Make patterns on paper.
3. Cut out the material.
4. Cover the table.

It is necessary to measure the tabletop several times. You need to use the average value. When cutting a layer, you need to take into account the errors that appear as a result of measurements. This will help avoid damage to the material.

Trimming is carried out using a stationery knife, small defects are eliminated with scissors.

The best manufacturers

Liquid glass films are produced by many well-known manufacturers. Among them is DeVetro - its products belong to the premium class, are famous for their strength and durability, and are the most resistant to mechanical damage. Siliconica products are less durable, difficult to maintain, and not very resistant to mechanical damage. Decosave is a “liquid glass” for decorative purposes; despite its rather high thickness, the film is aimed more at office use.

Among manufacturers of PVC and silicone products, recognized leaders are IKEA, Mevia, Ofiston, and Modern. Each of these companies has its own product lines for home and office, and updated collections are regularly released.

You can learn how to cover a table made of chipboard with film from the video below.

Stereotypes about MDF facades under film

Glossy MDF facade Over the long period of existence, film furniture facades from the manufacturer have become covered with myths and stereotypes, because of which they “fell in the eyes” of the average consumer with a modest budget. For example:

• the glossy film of MDF facades peels off in places near ovens, as it is affected by moist air;
• such facades are afraid of extreme temperatures;
• PVC film for furniture fades;
• façade film is not resistant to mechanical damage;
• The PVC coating swells, etc.

All these points are real only if your MDF facades use a Chinese-made film with a thickness of 0.09-0.2 mm. If we are talking about PVC film with a thickness of 0.3-0.5 millimeters, such flaws are irrelevant for them. Regarding the fact that the film swells, this is only possible if the air temperature in the room exceeds 70 degrees, which is only likely in the event of a fire.

The quality and quantity of glue used for lining MDF with PVC film also matters. If it is insufficient, it may happen that the film has come off. You can check the quality of the adhesive composition in the store by prying the lining of the test sample with the tip of a knife or a fingernail from the end. If this was done without much effort, the glue is of poor quality or there is not enough of it. Unfortunately, it is impossible to correct this defect - all that remains is to replace the kitchen facades (for example, ours).

Peculiarities

Protective film for tables has gained particular popularity since open furniture designs became fashionable. On a transparent glass module or a polished bar counter, smooth ceramics, even cups leave noticeable marks, not to mention the scratches that easily appear on such surfaces. In order not to sacrifice aesthetics, in Asian countries, where such coatings are especially popular, they came up with special, unnoticeable overlays to protect against damage.

They can replace a tablecloth, having a decorative covering. But much more often, completely transparent options are used, suitable for both a desk and a glass table in the dining room or living room. In most countries of the world, tabletop pads are called blotters. They come in glossy and matte finishes, have different shapes and thicknesses, and allow you to fully protect the surface from possible mechanical or thermal damage.

Today, table film on sale is most often presented under the name “liquid glass”. Let us list all the properties of this material.

1. Stealth. The overlay does not cover the surface of the table if you want to preserve the texture and pattern of its surface.
2. Protective functions. The coating prevents fading under the influence of ultraviolet radiation (the film itself does not turn yellow due to the addition of blue pigment). In addition, it protects against penetration of active dyes, moisture and chemical reagents into the structure of the material.
3. Heat resistance. There are no traces left on the table from hot plates, cups, or other utensils. You can safely put on a kettle or saucepan.
4. Versatility. In the kitchen, such a film can protect work surfaces, in the office - a desk. The coating is indispensable for transparent, polished, varnished smooth materials that easily lose their appearance. When laying chipboard on a slab, it is possible to reduce the risk of moisture penetration into the seams.
5. Functionality. You can store important notes and phone numbers on sticky notes under the film on your desktop. If you want to decorate the interior in an original way, you can make a collage of photographs on the tabletop, and then cover it with protective “liquid glass”.
6. Easy to clean. Simply wipe the material with a damp sponge or cloth - no need to use aggressive chemical cleaning agents.
7. Fit tightness. On smooth surfaces, the material always lies tightly, without moving. But if you lay such a coating on ordinary sanded wood or other rough materials, the contact abilities will be noticeably reduced.

For the production of such coatings, hypoallergenic materials (silicone, PVC) are used, ensuring complete safety during use. The film can be easily rolled up for storage or transportation and is not afraid of cracks and creases.

PVC films

PVC film
is a decorative facing polymer film designed for decorating various surfaces. The main type of polymer films used for cladding are films based on polyvinyl chloride (PVC), usually 0.2-0.50 mm thick. Less common are finishing materials based on polystyrene, acrylic polymers, etc. They can be transparent or pigmented (for example, with a wood grain pattern), glossy, matte or semi-matte, rigid or elastic. PVC films, thanks to the huge variety of colors, textures and embossings, make it possible to imitate natural wood, marble, stone, etc. on the surface of the facing material, not only in appearance, but also to the touch. It is not only beautiful, but also practical, durable and inexpensive.

PVC film is applied

for decorating by pressing MDF boards, laminating wood boards and wrapping profiles. Used for the production of furniture facades, interior doors, furniture, wall panels, windows, etc.

Our company offers several types of film material:

Film for membrane-vacuum pressing.

Films for membrane-vacuum pressing are intended for cladding relief (paneled) surfaces such as: three-dimensional furniture facades (made of MDF), door leaves, table tops, as well as various decorative furniture elements using special equipment - a vacuum press (with or without a membrane) . As a rule, thicker films are used for these purposes, 0.3-0.5 mm (300-500 microns) thick, less often 0.25 mm (250 microns), both plain and with a printed pattern with a “wood-like” texture "

Film for lamination (lamination) of profile moldings (for window profiles and window sills).

This category of films is used for wrapping profile moldings made of any materials, be it wood, plastic (PVC) or metal (aluminum). Cladding of the profile is carried out using a cladding installation (machine for wrapping profile moldings). It should be noted that for laminating window/door profiles, two-layer PVC films with a top acrylic layer for protection against UV radiation are used.

Film used for laminating smooth surfaces.

This type of film is suitable for cladding flat surfaces such as: panels (PVC and MDF), particle boards (MDF and chipboard), cabinet furniture walls, window sills. It’s worth mentioning right away that the use of polymer films for cladding chipboard is very limited due to the low physical and mechanical characteristics of the resulting coating and low heat resistance.

PVC films have the following advantages:

a variety of decorative patterns, structures, colors and ideas for creating stylish doors and furniture;

constancy of color and appearance, which creates the opportunity to solve the problem of replacing damaged parts of doors and furniture;

environmental friendliness of materials: PVC film is produced using paints and varnishes that are safe for human health;

possibility of selecting PVC film for laminated chipboard decors;

resistance to external influences, easy to maintain.

Source: www.alfint.ru

Features of PVC tablecloth

Often transparent tablecloths are made from a material such as polyvinyl chloride. This universal substance is used in the manufacture of windows, plastic bags, and, as it turns out, tablecloths. Let's look at the features of transparent PVC tablecloths.

Firstly, it is an affordable price. Every housewife can afford to buy such a product for her home.

Rare practicality. A PVC tablecloth is not afraid of water, dirt, stains - all dirt can be easily removed with a regular rag.

The variety of models, patterns and designs of products made from this material is so great that any housewife has plenty to choose from.

The tablecloth is distinguished by its good versatility and, if chosen correctly, can decorate the interior of almost any kitchen. The product is very practical and does not require special care. Simply wipe it with a damp cloth and brush away crumbs after eating. The PVC product does not wrinkle at all and does not need to be washed.

Reviews of tablecloths with Teflon coating can be found in this material.

Silicone

The big advantage of PVC tablecloths is that you can choose either transparent white or transparent colored options. This variety allows you to better decorate the room.

Let's also consider the features of transparent silicone products. They, like PVC tablecloths, also have their advantages. Silicone tablecloths look extremely elegant and decorative.

Read about how to choose a tablecloth for an oval table in this article.

The transparent silicone model looks charming on wooden and, especially, glass kitchen tables. It gives weightless airiness to the kitchen space, so it can be used to “dilute” a too heavy interior - with a bulky dark kitchen set.

Silicone tablecloths often come without a pattern, which makes it possible to use them in strict, minimalist interiors. And modern fashion welcomes precisely such interiors. The lack of pattern also emphasizes the elegant shape of the furniture.

The advantage of silicone over PVC is that it can easily withstand high temperatures. Many people at home have modern silicone baking dishes that can withstand enormous heat in the oven. So you can rest assured that the tablecloth will somehow withstand a mug of tea or even a hot pan from the stove without losing its decorative properties or its technical characteristics.

The silicone product is absolutely silent during operation. There will be no rustling, no rustling, no other sounds from touch.

In conclusion, it is worth noting that silicone transparent tablecloths are indeed very practical and at the same time presentable. They are popular in Western countries, and now they are very quickly being introduced into our everyday life. You will also appreciate their practicality, durability, versatility and decorativeness.

You should also pay attention to what kinds of transparent tablecloths there are for the kitchen table and how good they look

Five main “secrets” when ordering MDF facades under PVC film

I will outline the main points when choosing the design of custom-made film facades to make it easier for you to navigate the place:

1. When ordering most routing patterns, you are prompted to select a cutter type. The cutter can be of different depths, widths, and reliefs. And in each case the drawing will look completely different. For example, in the photo there is a regular rectangular pattern with cutters of different width, depth and relief.

1. According to the design, the cutters on the facades for drawers, bottle holders and other narrow elements need to be further clarified. Due to the small width, a typical drawing diagram can be greatly distorted and look completely unpresentable. Sometimes it is better to leave narrow facades without milling at all. And they will look much nicer.

1. You can choose not only the type of cutter, but also the method of processing the chamfer - the edges of the facade. The chamfer “makes” even smooth surfaces without milling (for example, countertops or facades in the Art Nouveau style) look quite unusual and stylish. It is decorated with an interesting chamfer and a classic facade.

1. When choosing a pattern from a thin cutter, be sure to pay attention to the thickness of the selected film. And check with consultants what the finished façade will look like. I will explain using a specific example of facades for a nursery, in a combination of PVC film “maple” with colored, “orange gloss” and “lemon gloss”.

Colored glossy film with sparkles is thicker initially than smooth maple without texture. As a result, the pattern, so beautiful and graceful on maple, on the MDF facades under the glossy film was barely noticeable. A sharp contrast - visible even in the photo.

1. Also, the PVC film with embossing will make the small and ornate pattern of the cutter less expressive - it gets lost under it. And practically unnoticeable. If you don’t additionally highlight it with patina. And this is paid separately.

To independently order MDF facades under PVC film, it is important to correctly calculate the dimensions. You can read about it here.

Application area

As you can see, old furniture is mostly covered with self-adhesive film. The point is that covering furniture with film allows you to hide the imperfections of the furniture surfaces and make it more perfect from a visual point of view.

It is produced in different textures, so adhesive films can be used to decorate a wide variety of furniture in any room. For example, wood-look self-adhesive is used in living rooms and bedrooms. It perfectly masks all the disadvantages of outdated furniture and gives it a sophisticated, expensive look.

Heat-resistant (heat-resistant) film is used in the kitchen. Thanks to improved technical characteristics, it can be glued even in close proximity to the plate without the risk of being damaged.

Also, many manufacturers produce special subtypes of films with water-repellent effects. They are installed on furniture in the bathroom and other particularly wet rooms (for example, in baths, saunas, SPA salons, and so on).

Pros and cons of adhesive film

Self-adhesive film for covering furniture has a number of significant advantages. However, there are several disadvantages that cannot be ignored.

So, the advantages of the product are:

• Diversity. Self-adhesive film coatings are produced in a wide variety of designs and colors, which makes the products truly universal.
• High temperature resistance. Makes it possible to stick the material in different rooms, in particular in the bathroom and kitchen.
• Safety. Only components that are safe for humans are used in the production of products. They do not cause the slightest harm, which makes it possible to use coatings for decorating children's furniture. Purchasing is available in certain volumes: in other words, on a cut-off basis. Therefore, it is possible to purchase furniture film in exactly the quantity required.
• It is easy to stick film products without much experience. An excellent option even for a novice master.
• Children's designs available. This fact allows you to design children's furniture in an original way so that it is suitable for the interior of the rooms of younger family members.
• You can visually increase the space. If the room is small, then it is easy to visually expand it thanks to the use of glass effect film.
• There is no need for complex care. To clean furniture covered with decorative film, simply wipe it gently with a damp cloth.
• When gluing the material, you do not need to use additional adhesive. Thanks to the care of manufacturers, obtaining a high-quality and reliable connection to wooden surfaces is guaranteed for many years.

In addition, in some cases the cost of the material is quite high. However, the price is fully justified by the quality of the products.

How to choose film for furniture?

Unfortunately, self-adhesive furniture film has not yet become widespread in our country. That’s why not everyone knows how to choose the right product.

To make a selection, you should know certain nuances when using these products. We present several basic criteria for choosing the optimal option for a specific purpose.

Color palette

So, first of all, it is important to focus on the color of the material for pasting furniture. The most popular shades, based on statistics from specialized stores, are black, red and white tones

And it’s not surprising, because with them a fairly wide field for decorative creativity appears.

If the main goal is simply to protect the furniture coating, take a closer look at transparent film coatings. You also need to take into account the room in which you plan to place decorated furniture. Naturally, for a bedroom in soft colors you need to select appropriate options with calm, pastel colors.

Subtleties when using

Another parameter by which an adhesive film is selected is the features of its gluing and operation.

For example, it is important to focus on individual product performance. In other words, if you plan to cover furniture in the bathroom or kitchen, then purchase waterproof, fire-resistant coating models

Moreover, focus on the condition of the furniture being decorated. If it has already experienced “better times”, avoid gluing matte films, because all the imperfections will be visible on them. In such cases, embossed self-adhesive furniture film is ideal.

How to laminate chipboard with your own hands

Process

Laminating chipboard at home involves applying a special film to the surface.

ATTENTION! It is impossible to reproduce the perfect finishing of furniture at home. Factories immediately produce furniture made from laminated chipboard (chipboard), the quality of which will be better and the service life will be longer, with the remaining savings.

There are several ways to laminate furniture at home:

• — Application of self-adhesive film to the surface. Simply remove the layer of protective paper and carefully apply it to the furniture. After the film has stuck, remove air bubbles with a plastic spatula or cloth.
• — Gluing the film with glue. Universal adhesive is applied to the slab and left for a while, after which a film is applied to it. For high-quality gluing, it is recommended to roll it over and hold it under pressure.

BE CAREFUL! When applying the film, carefully measure the shape and surface area, because if you apply the laminate material crookedly, it will be impossible to reuse it - re-glue it.

Which laminating film should I choose?

For lamination of chipboards, several types of films have been developed, which differ in their properties, composition and cost:

• — Phenolic film. Its properties include increasing the wear resistance of materials in terms of mechanical damage, but also having a low moisture resistance.
• — PVC (Polyvinyl chloride). The functionality of this film is aimed at improving the water resistance of furniture.
• — Melamine film. Its properties include wear resistance and moisture resistance, however, the membrane contains formaldehyde resin, which can cause some damage to health when heated. This product should be used outdoors. Cooled material is not hazardous.

Preparation for lamination

Before applying film to furniture, you need to prepare it for the procedure:

1) First we sand the product. This can also be done with sandpaper - if it is not large in size, or, if it is large in size - with a grinder. Sand until the furniture walls are smooth.

2) Then it is recommended to putty the chipboard, dry it and go over it again with less sandpaper.

IMPORTANT! The smoother the surface, the more accurately the film will sit.

3) Next, the workpiece is treated with a wood primer and dried.

4) It is necessary to cut the film, adjusting it according to the details - take into account the height, width, shape and corners of the furniture.

5) Next, proceed to gluing the film: having freed part of the protective layer, apply it to the surface of the furniture and gradually move along it.

How to lay film on a glass table

The overlay is laid on the surface without any particular difficulties, but it requires following a special algorithm:

• Before covering the table with film, it is wiped from dirt and dust so that the stains are absolutely invisible.
• Then the “soft glass” is spread on the surface and pressed against it with both hands.
• If bubbles have formed under the cover, the “liquid glass” should be carefully lifted, spray the surface with water from a spray bottle, and press again. This method of installation will allow air to escape along with water, and the magnetic film will be leveled on the table.

Types of PVC films for kitchen facades

To cover facades, PVC film with a thickness of 0.05 to 0.8 mm is used. Depending on the application method and operating properties, there are the following types of material:

• membrane-vacuum film (0.25-0.5 mm) - needed for vacuum pressing of bent facades;
• PVC for laminating (up to 0.3 mm) - used for laminating smooth panels;
• PVC for lamination (0.3-0.5 mm) - allows you to laminate surfaces not only in one, but also in several layers.

For home use, self-adhesive film in a roll (0.3-0.5 mm) is used.

Polyvinyl chloride coating is applied in one of three ways:

• laminating;
• lamination;
• post-formation.

Laminating is based on preliminary application of glue to the base and pressing the film against it under conditions of high pressure and temperature. The cost of laminating for the manufacturer is much more economical, but the quality of gluing is not satisfactory - the PVC can quickly peel off.

Lamination is the design of a façade at critical temperatures. After applying the film, the facade is additionally covered with a layer of protection. This method is much better than lamination.

Postforming is the most absolute technique for applying PVC. The film is applied to the surface in an even layer, and then placed under a special press. If a specific pattern or shape is required, it is also adjusted under the press.

Self-adhesive film can be used to cover furniture at home. First, you should carefully clean the surface of the facade from dust and wipe it with a degreaser (for example, white spirit), and then carefully apply the PVC coating. To get rid of bubbles, the coating can be leveled with a spatula wrapped in fabric. Unfortunately, this film will not last long.

When selecting film, attention is also paid to the country of origin. It is believed that the products of Manufacturers from Europe are better, PVC from Italy is especially valued. However, factory-made Chinese and Korean film is not worse at all, and is not expensive.

Cotton

Products made from transparent cotton lace are an excellent solution, but they are more suitable for a festive event, since natural material cannot be compared with artificial material in terms of practicality. Cotton looks very nice, but requires frequent washing.

Cotton transparent tablecloths are presented in a fairly wide range in stores. Without a doubt, you will find exactly what you need.

It’s also worth knowing that there are waterproof, impregnated tablecloths for the kitchen and how to choose the right size.

However, if you purchased a product with the addition of viscose or polyester, then this option will be much more practical. Mixed options are easier to wash and are not afraid of greasy stains. In addition, they also do not wrinkle. But, if a cotton model can be boiled or treated with bleach, then this “number” will not work with mixed fabrics. They cannot withstand high temperatures and require delicate washing.

Other methods of processing furniture

In addition to simply applying film to glue or gluing self-adhesive tape, there are several other methods for processing chipboard furniture:

• — Laminating. In this method, glue is applied to the product, and then a thermal film of a polymer composition is applied.
• — Veneering. Veneer is a very thin layer of high-quality wood, if natural, if synthetic - paper canvas with imitation of wood patterns. Using molten resins, such material is welded to the base under the influence of high temperatures.

Thus, laminating furniture at home is quite easy and the quality depends solely on your efforts.

Source: kakchistim.ru

Tabletop requirements

The countertop in the kitchen experiences daily stress and at the same time remains reliable and beautiful for years, looking no worse than other, less popular furniture. Table surfaces have to deal with spilled liquids, accidental knife blows and other mechanical impacts, but they should not lose their original appearance. The right coating will help you cope with different tasks. He must meet the following requirements:

the surface must have water-repellent properties; do not react to aggressive household chemicals; guarantee strength, durability and resistance to mechanical stress; the presence of heat-resistant indicators will allow you to place hot dishes on the table without fear of damaging it; the tabletop should not fade or change color over time; It is important for the coating to have an attractive appearance and match the style of the kitchen; You should choose a covering material that is easy to maintain; for example, loose surfaces can accumulate pathogenic microbes in recesses; in such cases, it is better to give preference to a smooth base.

Matte film for kitchen facades and the possibilities of its use

Matte kitchen film, used for finishing facades and other surfaces discussed above, makes it possible to:

1. Ensure furniture stability against temperature changes. The film can withstand heating up to +80 degrees, the material prevents deformation of kitchen cabinets due to the thermal effects of a frequently operating stove.
2. Make surface care as easy as possible. Matte kitchen film can be easily cleaned with a regular sponge; detergents can be used to remove grease and other difficult contaminants. The only exceptions are products with abrasive particles that damage the film surface. It is also worth noting that on a matte surface, fingerprints and other minor dirt are less noticeable than on a glossy surface.
3. Protect MDF or other facade material from moisture. This is especially important for the kitchen and bath, where, along with constant temperature changes, abundant steam formation occurs.
4. Ensure health safety. PVC film is completely harmless, under the influence of high temperatures and over time it does not emit harmful substances.
5. Increase the aesthetic appeal of the furniture facade. Matte film looks very impressive and allows you to diversify the appearance of furniture. Thanks to the wide range of colors of the material, the furniture finished with it fits perfectly into the interior of any palette and style.

Specifics of decorating furniture with self-adhesive

The bottom photo of self-adhesive film for furniture shows the processing of complex surfaces. In the absence of a rubber spatula, a home craftsman will be helped by an ordinary plastic card; he will need a hairdryer and a rag. The main recommendations for film decoration of furniture are:

- it is better to remove the fittings (handles, locks, hinges) before tightening them

-elements of collapsible structures are easier to veneer separately

- it is impossible to stretch the film without preheating

-for ease of cutting, there is a centimeter mesh on the reverse side (protective layer)

- the maximum number of re-gluings in case of incorrect positioning is 10 attempts, it is better to manage it in 5 – 3 times

- adhesion of cladding materials and furniture can be increased in corners by adding PVA glue

-it is more convenient to work on planes with a spatula, in corners and holes - with fingertips

During operation (manufacturers guarantee an 8-year service life in bathrooms, a 10-year period in rooms with normal humidity), it is enough to exclude detergents containing chlorine. The film is a universal decor that can be used to treat walls near furniture.

Preparatory work

If you have already purchased photo wallpaper for an old wardrobe, then do not forget about the building material. The list of necessities includes:

Necessary equipment

• pencil, tape measure, ruler;
• sandpaper;
• construction glue or PVA;
• roller or brush;
• cloths for smoothing wallpaper.

Before gluing, be sure to prepare the surface. Use sandpaper to remove the old coating. If the cabinet was varnished, then you can heat it up with a hair dryer and remove the paintwork from the surface with a scraper, but after that you can sand it thoroughly. After this, remove all dust from the surface with a damp cloth and allow the furniture to dry thoroughly.

Features of care

Despite its resistance to the adverse effects of chemical compounds, liquid glass is a soft material. Proper care helps extend its service life.

Basic Rules:

The water temperature for processing the tablecloth should be room temperature or about 40 °C. This helps accelerate the impact of detergents; The material can only be wiped with soft cloths and napkins. Products made from microfiber and flannel are best suited. You can also use sponges made from foam rubber. There should be no hard inserts; After cleaning the surface, it is necessary to remove any remaining detergent. This will help reduce the risk of clouding and streaks; the surface must be treated with gentle liquid agents - solutions and gels

Do not use preparations with active granules, as well as hard powders; severe contamination must first be treated with the product, then left for 5-15 minutes, only then carefully wipe with a soft cloth. You can't put in any effort.

It is advisable to purchase a tablecloth on the official website of the manufacturer, because counterfeits may be sold in retail stores. Before purchasing, you should carefully study the reviews and reputation of the manufacturer.

Liquid glass on the table is a good solution for both the kitchen, children's room or office. The main advantage is resistance to moisture and abrasion. Such protection is especially useful for glass and polished tables. On a desk, such a film will successfully replace plexiglass. It is transparent, but impenetrable to dust, water and various contaminants, so it will extend the life of the countertop.

Silicone table pads

Types of soft glass tablecloths:

• The bulk of silicone pads are available in a colorless version.
• There are silicone tablecloths for tables with a pattern, which allows you to give the room a more original look. Any design is applied to the film on the inside, which guarantees a long service life. Most often, images of fruits, berries, flowers and intricate geometric shapes are used.

Transparent silicone pad with a pattern

Buyers have the opportunity to purchase a matte film; it looks quite unusual on the countertop and does not interfere with the overall interior.

Matte silicone pad us tol Ikea

For the convenience of using thick film, you can attach special corner silicone pads to the corners of the table. They additionally prevent premature damage to furniture.

Corner silicone table pad

General information

The oilcloth for the table is made from laminated protective transparent PVC film. Production - South Korea.

The product has a shiny laminated surface and reliably protects the table from any damage. The oilcloth structure is flexible and durable. It is tear-resistant, practically does not wrinkle and cannot be cut with a knife. Soft glass remains transparent for a long time and retains all its properties.

Thanks to the flexible tablecloth, wear and tear on the tabletop is reduced. Dust on the surface covered with a protective film is practically invisible, any dirt can be easily wiped off without scratching or staining the table material.

Flexible glass is intended for use:

• in any office;
• in the kitchen;
• in the dining room;
• in a restaurant (cafe).

Which table is it suitable for?

Protective film is suitable for all types of tables, but is especially relevant for glass and lacquered ones. The tablecloth protects the kitchen table from cuts, the desk from rubbing, and the dining table from accidental stains.

It can also be any table in shape:

• rectangular;
• square;
• round;
• oval;
• non-standard shape.

Main characteristics

Before purchasing the product, you must select the thickness:

• 1.2 mm is used to protect chests of drawers, window sills, children's and school tables;
• 1.8 mm is well suited for the kitchen (protection of tables and countertops), children's (protection of desks) and office (protection of tables and window sills);
• 2.2 mm is designed to protect large surfaces and helps emphasize the premium quality of the interior.

Liquid glass on the table has the following characteristics:

• Duration of operation - up to 5 years;
• transparency - 98%;
• hardness - 37;
• blue pigment that protects against yellowness;
• resistance to sunlight;
• food standard - the material is allowed for contact with food;
• synthetic smell - absent;
• There are no heavy metal impurities in the composition.

Advantages of flexible glass

Main advantages of the product:

• easy to trim after shrinkage;
• has a comfortable temperature range - from –20 to +80;
• merges with the surface;
• just spread out;
• does not slip, lies well under its own weight;
• greasy stains are not eaten away;
• any dirt is easily removed.

If you want, you can decorate the tablecloth. Any stickers can be easily attached to the silicone surface. You can also paint it with permanent paint, or attach fringe around the perimeter.

Main disadvantages

Over time, the film may shrink. This happens even against the backdrop of careful operation and proper maintenance. The color of the film becomes cloudy, and the product itself takes on a sloppy appearance.

The deformation cannot be corrected, and therefore you have to purchase a new tablecloth.

Options for protecting your kitchen work surface

There are two main ways to protect a wooden tabletop from high loads: coat it with a paint and varnish composition or cover it with special oil or wax (creating an invisible, water-repellent film).

Tung, linseed or citrus oils provide a high degree of surface protection from high temperatures, mechanical stress and air humidity. They can only be applied to pre-sanded wood over the entire surface of the table. This composition does not have a repulsive odor; when used, the natural texture of the material is completely preserved. Experts recommend applying a small amount of wax to fix the coating.

Paint and varnish compositions have long been used to restore wooden surfaces. However, oil ones are becoming more and more popular on the Russian market. Their undoubted advantages are: environmental friendliness, long service life and resistance to high temperatures.

Attention: There is an easier and more cost-effective way than to cover a wooden countertop in the kitchen - in this case, a self-adhesive film with the effect of natural wood, stone, metal and even marble will come to your aid.

This method will not only protect the surface from exposure to chemicals, food additives, spilled coffee, scratches and chips, but will also give you the opportunity to update your kitchen set in a short time.

What do you do with old furniture?

• We take it to the country, to the village, to the garage 38%, 95 votes

  95 votes 38%

  95 votes - 38% of all votes

• We throw out 22%, 55 votes

  55 votes 22%

  55 votes - 22% of all votes

• We repair, update 22%, 55 votes

  55 votes 22%

  55 votes - 22% of all votes

• We give, we give 11%, 28 votes

  28 votes 11%

  28 votes - 11% of all votes

• Selling 7%, 17 votes

  17 votes 7%

  17 votes - 7% of all votes

Total votes: 250

05.04.2018

×

You or from your IP have already voted.

Manufacturers and prices

Let's find out which of the manufacturers today offers us the best selection of transparent kitchen tablecloths at reasonable prices.

NIKLEN

The Canadian manufacturer offers the most elegant models made of PVC. The work is so delicate that from a distance a confident impression of natural lace is created. Ornaments are traditional: floral, plant. A product 110x140 cm rectangular in shape will cost 352 rubles.

Agness

This Chinese trading and manufacturing brand offers high-quality polyester products. The models are real works of art - beautiful, but at the same time practical. The cost of a transparent lace product 85x85 cm is 1,776 rubles.

Gray Textile

The Chinese brand offers elegant models of PVC lace weaving. The cost of a product with a floral pattern 85x85 cm is 780 rubles.

If you want to purchase a strict, practical model without lace or other decor, suitable for everyday use and fitting into modern, laconic interiors, opt for Russian products with a strict rectangular shape. These tablecloths are a smooth, dense PVC film that protects the tabletop with an ideal transparent layer. Or opt for a set: tablecloth and chair covers in the same color scheme.

Such products are very inexpensive. For example, a tablecloth measuring 180x120 cm will cost only 57 rubles. Photos of various tablecloths for the table can be seen here.